
LED outdoor area floodlight | 50W | 230V | 4000K | 6500lm | 90° | IP65 | MADOR | 013334
Code: MADOR-50-4000Price 96.79 € VAT incl.( 79.99 € VAT excl. )-
LED outdoor area floodlight | 50W | 230V | 4000K | 6500lm | 90° | IP65 | MADOR | 013334
MADOR 50W is an IP65 aluminium LED floodlight delivering 6,500 lm (130 lm/W) of 4000 K neutral white light. The 90° symmetric optic concentrates light on a clearly defined zone – a façade, gate or driveway.
Key idea:
High efficacy (130 lm/W) means the same area is lit with less power than with older LED or halogen floodlights. A compact solution for private or commercial sites that need bright but not excessive light.Power
50 WLuminous flux
6,500 lm (130 lm/W)Beam angle
90°Protection
IP65, aluminiumOperating principle
The floodlight is fixed with its bracket to a wall, pole or structure and connected directly to the 230 V AC mains – the driver is built in.
SMD3030 LEDs and the optic form a 90° symmetric light distribution, while the aluminium housing dissipates heat – ensuring a stable luminous flux and the manufacturer-stated 50,000 h service life.
A power factor of ≥0.95 means a low reactive load on the grid, which matters when many luminaires share one circuit.
What makes MADOR 50W useful?
6,500 lm from 50 W, 90° distribution and an IP65 housing – one floodlight for long-term, maintenance-free outdoor use.Technical specifications
Product type LED outdoor area floodlight Manufacturer / series PHU BOWI (Poland) / MADOR Manufacturer index 013334 Product code MADOR-50-4000 EAN 5902808800996 Power 50 W Supply voltage 230 V AC, 50 Hz Luminous flux 6,500 lm Luminous efficacy 130 lm/W Colour temperature 4000 K (neutral white) Colour rendering index (CRI) ≥80 Power factor (PF) ≥0.95 Beam angle 90° LEDs SMD3030 Ingress protection IP65 Housing Aluminium, grey Dimensions 350 × 75 × 75 mm Operating conditions −25…+60 °C, relative humidity <85 % Service life 50,000 h Driver Built-in, connects directly to 230 V Key features
- 130 lm/W efficacy – more light per watt, lower electricity costs.
- 90° symmetric optic – light is focused on the target with less spill to the sides.
- IP65 aluminium housing – dust-tight, protected against water jets, good heat dissipation.
- CRI ≥80 – natural-looking colours, objects and people are easier to recognise.
- PF ≥0.95 – low reactive load, suitable for group connection.
- 4000 K neutral white light – comfortable for the eye, suits residential and commercial settings.
Where is it used?
- Private yards and driveways
- Building façades and entrances
- Gates and fence perimeters
- Small car parks
- Outbuildings and warehouse access areas
- Billboards and signage
Use by need
Homeowner.
A brightly and evenly lit yard or driveway without high electricity costs.Electrician.
Simple installation: bracket, 230 V connection, no separate driver needed.Small business.
A lit façade, entrance or sign makes the premises more visible at night.Practical application
If you need to light a yard and driveway, MADOR 50W mounted on the façade is aimed at the driveway and gate, and its 130 lm/W efficacy means no higher-power floodlight is needed.Pros
- 130 lm/W – high luminous efficacy
- Verified manufacturer data: flux, CRI, PF, operating temperature
- IP65 aluminium housing
- Directional 90° optic
- Built-in driver, PF ≥0.95
- Manufacturer-stated 50,000 h service life
Cons / limitations
- No motion sensor – control requires a photocell, timer or sensor
- Dimming is not stated in the manufacturer data
- Larger areas need more points or the wide-beam version
- Fixed colour temperature – cannot be changed
Safety and installation notes
- Disconnect the power supply before installation and verify the line is dead.
- Make outdoor connections in a sealed junction box (IP65 or higher).
- Protect the circuit with a circuit breaker; an RCD is recommended for outdoor circuits.
- Earth the housing – connect the PE conductor.
- Aim the floodlight so that it does not dazzle drivers or neighbours; adjust the tilt.
- Work on 230 V installations must be carried out by a qualified electrician.
Quick selection guide
50 W6,500 lm4000 K90°IP65230 VSuitable when you need:- Directional light on a façade, gate or driveway
- A compact floodlight for a house or small business
- A reliable IP65 floodlight with verified data
Check before use:- Whether the support and bracket suit the floodlight dimensions (350 × 75 × 75 mm)
- Whether control is needed – photocell, timer or motion sensor
- Whether the beam angle matches the area to be lit
- Whether circuit protection and cable cross-section match the total load
Important reminder: The floodlight is not intended for emergency lighting and has no motion sensor – use a photocell or sensor for automatic control.FAQ
Is a separate driver needed?
No, the driver is built in – the floodlight connects directly to 230 V AC.How much light does MADOR 50W deliver?
According to the manufacturer – 6,500 lm, i.e. 130 lm/W.What is the difference between the 90° and 70°×140° versions?
The 90° optic focuses light on the target, while the 70°×140° optic spreads it in a wide horizontal strip for larger areas.Can it be used outdoors in the rain?
Yes, the IP65 housing is dust-tight and protected against water jets; operating temperature −25…+60 °C.Can it be used with a motion sensor or photocell?
Yes, the 230 V supply can be switched by an external sensor or photocell rated for the floodlight power.Which colour temperature to choose – 4000 K or 5500 K?
4000 K is a more comfortable neutral light for residential and commercial settings; 5500 K is a cooler, higher-contrast light for work and industrial areas.LED outdoor area floodlight | 50W | 230V | 4000K | 6500lm | 90° | IP65 | MADOR | 013334
MADOR 50W 4000 K – 6,500 lm, 130 lm/W, 90°, IP65 aluminium LED floodlight with built-in driver for yards, façades and driveways.
Published: 2026-11-14 · Data verified against the manufacturer datasheet: 2026-11-14
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review

