Products catalog

  • LED outdoor area floodlight | 50W | 230V | 5500K | 6500lm | 70°×140° | IP65 | MADOR | 012941

    Code: MADOR-50-5500
    Barcode: 5902216798953
  • LED outdoor area floodlight | 50W | 230V | 5500K | 6500lm | 70°×140° | IP65 | MADOR | 012941

    MADOR 50W is an IP65 aluminium LED floodlight delivering 6,500 lm (130 lm/W) of 5500 K cool white light. The 70°×140° optic spreads light widely in the horizontal plane, making it suitable for evenly lighting yards, car parks and warehouse access areas.

    Key idea:
    High efficacy (130 lm/W) means the same area is lit with less power than with older LED or halogen floodlights. A compact solution for private or commercial sites that need bright but not excessive light.
    Power
    50 W
    Luminous flux
    6,500 lm (130 lm/W)
    Beam angle
    70°×140°
    Protection
    IP65, aluminium

    Operating principle

    The floodlight is fixed with its bracket to a wall, pole or structure and connected directly to the 230 V AC mains – the driver is built in.

    SMD3030 LEDs and the optic form a 70°×140° wide light distribution, while the aluminium housing dissipates heat – ensuring a stable luminous flux and the manufacturer-stated 50,000 h service life.

    A power factor of ≥0.95 means a low reactive load on the grid, which matters when many luminaires share one circuit.

    What makes MADOR 50W useful?
    6,500 lm from 50 W, 70°×140° distribution and an IP65 housing – one floodlight for long-term, maintenance-free outdoor use.

    Technical specifications

    Product type LED outdoor area floodlight
    Manufacturer / series PHU BOWI (Poland) / MADOR
    Manufacturer index 012941
    Product code MADOR-50-5500
    EAN 5902216798953
    Power 50 W
    Supply voltage 230 V AC, 50 Hz
    Luminous flux 6,500 lm
    Luminous efficacy 130 lm/W
    Colour temperature 5500 K (cool white)
    Colour rendering index (CRI) ≥80
    Power factor (PF) ≥0.95
    Beam angle 70°×140°
    LEDs SMD3030
    Ingress protection IP65
    Housing Aluminium, grey
    Dimensions 350 × 75 × 75 mm
    Operating conditions −25…+60 °C, relative humidity <85 %
    Service life 50,000 h
    Driver Built-in, connects directly to 230 V

    Key features

    • 130 lm/W efficacy – more light per watt, lower electricity costs.
    • 70°×140° wide optic – one floodlight covers a wider strip, with fewer dark zones between luminaires.
    • IP65 aluminium housing – dust-tight, protected against water jets, good heat dissipation.
    • CRI ≥80 – natural-looking colours, objects and people are easier to recognise.
    • PF ≥0.95 – low reactive load, suitable for group connection.
    • 5500 K cool white light – high-contrast light for work zones and industrial sites.

    Where is it used?

    • Private yards and driveways
    • Building façades and entrances
    • Gates and fence perimeters
    • Small car parks
    • Outbuildings and warehouse access areas
    • Billboards and signage

    Use by need

    Homeowner.
    A brightly and evenly lit yard or driveway without high electricity costs.
    Electrician.
    Simple installation: bracket, 230 V connection, no separate driver needed.
    Small business.
    A lit façade, entrance or sign makes the premises more visible at night.

    Practical application

    If you need to light a yard and driveway, MADOR 50W mounted on the façade lights a wide strip of the yard along the façade, and its 130 lm/W efficacy means no higher-power floodlight is needed.

    Pros

    • 130 lm/W – high luminous efficacy
    • Verified manufacturer data: flux, CRI, PF, operating temperature
    • IP65 aluminium housing
    • Wide 70°×140° distribution – fewer luminaires per area
    • Built-in driver, PF ≥0.95
    • Manufacturer-stated 50,000 h service life

    Cons / limitations

    • No motion sensor – control requires a photocell, timer or sensor
    • Dimming is not stated in the manufacturer data
    • Less suitable than a directional optic for accenting a narrow zone or tall object
    • Fixed colour temperature – cannot be changed

    Safety and installation notes

    • Disconnect the power supply before installation and verify the line is dead.
    • Make outdoor connections in a sealed junction box (IP65 or higher).
    • Protect the circuit with a circuit breaker; an RCD is recommended for outdoor circuits.
    • Earth the housing – connect the PE conductor.
    • Aim the floodlight so that it does not dazzle drivers or neighbours; adjust the tilt.
    • Work on 230 V installations must be carried out by a qualified electrician.

    Quick selection guide

    50 W
    6,500 lm
    5500 K
    70°×140°
    IP65
    230 V
    Suitable when you need:
    • Even lighting of a wide area from one point
    • A compact floodlight for a house or small business
    • A reliable IP65 floodlight with verified data
    Check before use:
    • Whether the support and bracket suit the floodlight dimensions (350 × 75 × 75 mm)
    • Whether control is needed – photocell, timer or motion sensor
    • Whether the beam angle matches the area to be lit
    • Whether circuit protection and cable cross-section match the total load
    Important reminder: The floodlight is not intended for emergency lighting and has no motion sensor – use a photocell or sensor for automatic control.

    FAQ

    Is a separate driver needed?
    No, the driver is built in – the floodlight connects directly to 230 V AC.
    How much light does MADOR 50W deliver?
    According to the manufacturer – 6,500 lm, i.e. 130 lm/W.
    What is the difference between the 90° and 70°×140° versions?
    The 90° optic focuses light on the target, while the 70°×140° optic spreads it in a wide horizontal strip for larger areas.
    Can it be used outdoors in the rain?
    Yes, the IP65 housing is dust-tight and protected against water jets; operating temperature −25…+60 °C.
    Can it be used with a motion sensor or photocell?
    Yes, the 230 V supply can be switched by an external sensor or photocell rated for the floodlight power.
    Which colour temperature to choose – 4000 K or 5500 K?
    4000 K is a more comfortable neutral light for residential and commercial settings; 5500 K is a cooler, higher-contrast light for work and industrial areas.

    LED outdoor area floodlight | 50W | 230V | 5500K | 6500lm | 70°×140° | IP65 | MADOR | 012941

    MADOR 50W 5500 K – 6,500 lm, 130 lm/W, 70°×140°, IP65 aluminium LED floodlight with built-in driver for yards, façades and driveways.

    Published: 2026-11-14 · Data verified against the manufacturer datasheet: 2026-11-14

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • privacy policy

    Information