Products catalog

  • LED strip profile | 2m | bendable | anodized | for strips up to 12 mm | ARC12

    Code: ARC12

    Bendable anodized aluminium LED profile (TOPMET ARC12) – bends in its plane, so it suits curved surfaces, arches, round furniture and luminaires. Only 3.3 mm high.

  • LED strip profile | 2m | bendable | anodized | for strips up to 12 mm | ARC12

    Bendable anodized aluminium LED profile (TOPMET ARC12) – bends in its plane, so it suits curved surfaces, arches, round furniture and luminaires. Only 3.3 mm high.

    Key point:
    One of few profiles that can be bent to shape – minimum bending radius 500 mm.

    Technical specifications

    Product typeLED strip profile, bendable, anodized
    Model / markingTOPMET ARC12 CD/U5
    MaterialAnodized aluminium
    Cover (diffuser)None (sold separately)
    Width20 mm
    Height3.3 mm
    Inner width (strip seat)12 mm
    Min. bending radius500 mm
    Max. LED strip width12 mm
    Length2 m
    CompliancePassive mechanical product without electrical parts – CE marking under the LVD/EMC directives does not apply. The LED strip and power supply must carry their own CE marking.

    Dimensions are taken from the supplier cross-section drawing (mm). Check the actual profile before milling or plastering.

    Main functions

    • Bends in plane (min. R 500 mm)
    • For strips up to 12 mm
    • Anodized surface resists scratches

    Where is it used?

    • Curved furniture, bar counters
    • Arches, round ceilings and walls
    • Decorative luminaires

    Installation

    • Bend the profile by hand to shape (radius not less than 500 mm)
    • Fix with U5 mounting plates (sold separately)
    • Stick the strip, fit the cover (C or D, separately) and end caps

    Pros

    • Follows curved shapes
    • Very low – 3.3 mm
    • Covers, end caps and mounts available separately

    Cons / limitations

    • Cover and end caps sold separately
    • Bending below 500 mm radius may damage the profile

    Quick selection guide

    Choose this profile if:
    • you need a light line on a curved surface
    Choose another profile if:
    • you mount in a straight line – choose type A or B (cheaper, cover included)

    FAQ

    What bending radius?
    Not less than 500 mm.
    Is a cover included?
    No – cover, end caps and mounting plates are sold separately.

    Safety and installation notes

    • Power LED strips only with safety extra-low voltage (12/24 V DC) from a CE-marked power supply; the 230 V side must be connected by a qualified electrician.
    • Choose a power supply with at least 20 % power reserve.
    • Aluminium dissipates heat only when the profile is not covered by insulation and is in contact with air or a surface – do not plaster over the cover or block the ends.
    • Wear safety glasses when cutting the profile and remove swarf before sticking the strip.

    Concise technical description (LT / EN)

    LT: Profilis LED juostai | 2m | lankstus | anoduotas | juostai iki 12 mm | ARC12. Lankstus anoduoto aliuminio LED profilis (TOPMET ARC12) – lenkiamas plokštumoje, todėl tinka lenktiems paviršiams, arkoms, apvaliems baldams ir šviestuvams. Vos 3,3 mm aukščio.
    EN: LED strip profile | 2m | bendable | anodized | for strips up to 12 mm | ARC12. Bendable anodized aluminium LED profile (TOPMET ARC12) – bends in its plane, so it suits curved surfaces, arches, round furniture and luminaires. Only 3.3 mm high.

    Keywords

    led strip profile, bendable, anodized, for strips up to 12 mm, arc12, led profile, aluminium led channel, led profile with diffuser

    LED strip profile | 2m | bendable | anodized | for strips up to 12 mm | ARC12

    One of few profiles that can be bent to shape – minimum bending radius 500 mm. Order at elsprendimai.eu or pick up in Šiauliai, J. Basanavičiaus g. 23.

    Published: 2026-11-18 · Data verified against the supplier technical drawings: 2026-11-18

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    LED strip profile | type C | 3m | corner | for strips up to 12 mm | 4772124004764
    Code: 003W 3m

    Corner aluminium profile for LED strips. Mounted in a 90° corner – between wall and ceiling, inside furniture or under cabinets – and shines at a 45° angle.

    Price 9.80 € VAT incl.
    ( 8.10 € VAT excl. )
  • privacy policy

    Information