Products catalog

  • LED strip profile | type E | 3m | recessed | for strips up to 10 mm | 4772124004863

    Code: paslėpto E tipo 3m

    Recessed aluminium profile for LED strips with a flange. Inserted into a milled groove in furniture board, plasterboard or wood – only a thin line of light remains, flush with the surface.

  • LED strip profile | type E | 3m | recessed | for strips up to 10 mm | 4772124004863

    Recessed aluminium profile for LED strips with a flange. Inserted into a milled groove in furniture board, plasterboard or wood – only a thin line of light remains, flush with the surface.

    Key point:
    The flange covers the groove edges, so the recess looks neat without filling.

    Technical specifications

    Product typeLED strip profile, recessed
    Model / markingtype E (007W)
    Barcode (EAN)4772124004863
    MaterialAluminium
    Cover (diffuser)Opal (milky) – even light diffusion
    Flange width22 mm
    Width16 mm
    Height11.7 mm
    Inner width (strip seat)11.3 mm
    Max. LED strip width10 mm
    Length3 m
    Set contentsProfile, cover, 4 end caps (with cable hole)
    Country of originChina
    CompliancePassive mechanical product without electrical parts – CE marking under the LVD/EMC directives does not apply. The LED strip and power supply must carry their own CE marking.

    Dimensions are taken from the supplier cross-section drawing (mm). Check the actual profile before milling or plastering.

    Main functions

    • Hidden, flush mounting
    • Aluminium dissipates heat from the LED strip
    • Cover diffuses light and protects the strip

    Where is it used?

    • Recessed lighting in furniture, worktops and shelves
    • Plasterboard ceilings and walls
    • Stair treads, niches, mirrors
    • Light lines in commercial interiors

    Installation

    • Mill a groove matching the body width (16 mm) and height (11.7 mm)
    • Press in or glue the profile – the flange (22 mm) covers the edges
    • Stick the strip, lead the cable through the end cap, fit the cover

    Pros

    • Aesthetic, almost invisible profile
    • Flange hides imperfect milling edges
    • Cover and end caps included

    Cons / limitations

    • Requires milling or cut-out work
    • Harder to replace after installation

    Quick selection guide

    Choose this profile if:
    • you want a light line flush with the surface
    • you mount into furniture or plasterboard
    • the strip is not wider than 10 mm
    Choose another profile if:
    • you cannot mill – choose surface-mounted
    • you want no visible edge at all (under filler) – choose plaster-in

    FAQ

    What groove size is needed?
    Width to match the body (16 mm), depth at least the profile height (11.7 mm).
    Which strip fits?
    Strip up to 10 mm wide (inner width 11.3 mm).

    Safety and installation notes

    • Power LED strips only with safety extra-low voltage (12/24 V DC) from a CE-marked power supply; the 230 V side must be connected by a qualified electrician.
    • Choose a power supply with at least 20 % power reserve.
    • Aluminium dissipates heat only when the profile is not covered by insulation and is in contact with air or a surface – do not plaster over the cover or block the ends.
    • Wear safety glasses when cutting the profile and remove swarf before sticking the strip.

    Concise technical description (LT / EN)

    LT: Profilis LED juostai | E-tipo | 3m | įleidžiamas (potinkinis) | juostai iki 10 mm | 4772124004863. Įleidžiamas (potinkinis) aliuminio profilis LED juostai su flanšu. Įstatomas į išfrezuotą griovelį baldų plokštėje, gipso kartone ar medyje – lieka tik plona šviesos linija lygiai su paviršiumi.
    EN: LED strip profile | type E | 3m | recessed | for strips up to 10 mm | 4772124004863. Recessed aluminium profile for LED strips with a flange. Inserted into a milled groove in furniture board, plasterboard or wood – only a thin line of light remains, flush with the surface.

    Keywords

    led strip profile, type e, recessed, for strips up to 10 mm, led profile, aluminium led channel, led profile with diffuser

    LED strip profile | type E | 3m | recessed | for strips up to 10 mm | 4772124004863

    The flange covers the groove edges, so the recess looks neat without filling. Order at elsprendimai.eu or pick up in Šiauliai, J. Basanavičiaus g. 23.

    Published: 2026-11-18 · Data verified against the supplier technical drawings: 2026-11-18

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

  • privacy policy

    Information