LED strip profile | type M | 3m | plaster-in | flat | for strips up to 12 mm | 4772124005051
Code: juostoms M-tipo tinkuojamas 3mPrice 26.14 € VAT incl.( 21.60 € VAT excl. )Plaster-in aluminium profile for LED strips with perforated wings. The wings are filled together with the plasterboard joints – only the line of light remains, with no visible profile edge. Flat profile with wings on both sides – for straight light lines in the ceiling or wall plane.
-
LED strip profile | type M | 3m | plaster-in | flat | for strips up to 12 mm | 4772124005051
Plaster-in aluminium profile for LED strips with perforated wings. The wings are filled together with the plasterboard joints – only the line of light remains, with no visible profile edge. Flat profile with wings on both sides – for straight light lines in the ceiling or wall plane.
Key point:
A “trimless” solution: the profile becomes part of the wall or ceiling, and only the glowing line is visible.Technical specifications
Product type LED strip profile, plaster-in, flat Model / marking type M (018W) Barcode (EAN) 4772124005051 Material Aluminium Cover (diffuser) Opal (milky) – even light diffusion Width 56 mm Channel width 15 mm Height 15 mm Inner width (strip seat) 13 mm Max. LED strip width 12 mm Length 3 m Set contents Profile, cover, 4 end caps (with cable hole) Country of origin China Compliance Passive mechanical product without electrical parts – CE marking under the LVD/EMC directives does not apply. The LED strip and power supply must carry their own CE marking. Dimensions are taken from the supplier cross-section drawing (mm). Check the actual profile before milling or plastering.
Main functions
- Perforated wings bond firmly with the filler
- Light line without a visible edge
- Aluminium dissipates heat from the strip
Where is it used?
- Plasterboard ceilings and walls
- Shadow gaps, niches, stairwells
- Modern residential and commercial interiors
Installation
- Fix the profile to the plasterboard or frame before filling
- Fill over the wings through the perforation, reinforce with mesh tape
- Mask the channel before filling so no filler gets in
- After painting, stick the LED strip and fit the cover
Pros
- Minimalist trimless look
- Strong bond with the filler
- Cover and end caps included
Cons / limitations
- Installed at the construction/finishing stage
- The profile is hard to replace later – the strip can be replaced
Quick selection guide
Choose this profile if:- you are building plasterboard ceilings or walls
- you want a light line without a visible edge
Choose another profile if:- finishing is already done – choose a surface-mounted or recessed profile
FAQ
When to install?
At the plasterboard installation and filling stage, before painting.Which strip fits?
Strip up to 12 mm wide (inner width 13 mm).Safety and installation notes
- Power LED strips only with safety extra-low voltage (12/24 V DC) from a CE-marked power supply; the 230 V side must be connected by a qualified electrician.
- Choose a power supply with at least 20 % power reserve.
- Aluminium dissipates heat only when the profile is not covered by insulation and is in contact with air or a surface – do not plaster over the cover or block the ends.
- Wear safety glasses when cutting the profile and remove swarf before sticking the strip.
Concise technical description (LT / EN)
LT: Profilis LED juostai | M-tipo | 3m | tinkuojamas | plokščias | juostai iki 12 mm | 4772124005051. Tinkuojamas (po tinku, gipsu) aliuminio profilis LED juostai su perforuotais sparneliais. Sparneliai užglaistomi kartu su gipso kartono siūlėmis – lieka tik šviesos linija be matomo profilio krašto. Plokščias profilis su sparneliais iš abiejų pusių – tiesioms šviesos linijoms lubų ar sienų plokštumoje.
EN: LED strip profile | type M | 3m | plaster-in | flat | for strips up to 12 mm | 4772124005051. Plaster-in aluminium profile for LED strips with perforated wings. The wings are filled together with the plasterboard joints – only the line of light remains, with no visible profile edge. Flat profile with wings on both sides – for straight light lines in the ceiling or wall plane.Keywords
led strip profile, type m, plaster-in, flat, for strips up to 12 mm, led profile, aluminium led channel, led profile with diffuser
LED strip profile | type M | 3m | plaster-in | flat | for strips up to 12 mm | 4772124005051
A “trimless” solution: the profile becomes part of the wall or ceiling, and only the glowing line is visible. Order at elsprendimai.eu or pick up in Šiauliai, J. Basanavičiaus g. 23.
Published: 2026-11-18 · Data verified against the supplier technical drawings: 2026-11-18
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThis product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products


















