LED work floodlight | 20W | 1140lm+2160lm | 6500K | rechargeable | IP54 | Brennenstuhl | HL3000 | 1173730000 | 4007123681396

Technical specifications

Manufacturer: Brennenstuhl
Product type: mobile LED work floodlight / search light
Power: 20W
Light sources:
COB LED ring – for wide work area illumination
SMD LED – for directional lighting
COB LED luminous flux: 2160 lm
SMD LED luminous flux: 1040 lm
Colour temperature: 6500K, cool white light
SMD LED lighting range: up to 200 m
Protection rating: IP54
Impact resistance: IK08
Electrical protection class: III
Control: ON / OFF switch with mode selection
Light modes:
100% directional lighting
100% wide work area illumination
75%
50%
25%
Battery system: compatible with different 18V power tool batteries
Battery charging: batteries are charged with an external charger
Battery status indicator: yes
Deep discharge battery protection: yes
Protection against overheating caused by high load currents: yes
Construction: robust, lightweight, mobile housing
Handle: ergonomic
Base: adjustable magnetic base
Usage class: BGI608 K2 – for use in demanding conditions where higher mechanical, physical or chemical impact may occur

Functions

2-in-1 – directional search light and wide-beam work floodlight
Two light sources – SMD LED for long-distance lighting and COB LED for work area illumination
High luminous flux – up to 2160 lm with COB LED and 1040 lm with SMD LED
Lighting range up to 200 m – convenient for object inspection, searching or working in larger areas
Adjustable light intensity – 100%, 75%, 50% and 25% modes
Compatible with 18V tool batteries – Bosch Professional, Makita, Milwaukee, DeWalt, Metabo CAS, etc. using adapters
Battery status indicator – shows the remaining battery energy level
Battery protection – protects against deep discharge and overheating
Adjustable magnetic base – can be attached to metal surfaces and directed to the required angle
IP54 and IK08 protection – resistant to dust, water splashes and mechanical impacts

Use

For household users: Suitable for garages, homesteads, cars, yard work or power outages. Convenient to use where there is no permanent 230V power supply.

For electricians: Useful for installing electrical panels, laying cables, working in technical rooms or sites without lighting. The magnetic base allows attachment to metal surfaces.

For builders and repair technicians: Suitable for indoor and outdoor work, construction sites, finishing work, repairs and temporary workplace lighting.

For engineers and maintenance specialists: Convenient for equipment inspection, fault diagnostics, work with machines, production lines, warehouses or service areas.

For car repair workshops: Suitable for vehicle repair, lighting the chassis, engine compartment or work area. The directional light helps illuminate hard-to-reach places.

Advantages

2-in-1 function – directional light and wide work floodlight
High luminous flux – COB LED up to 2160 lm
Long-distance lighting – SMD LED shines up to 200 m
Compatible with many 18V battery systems
Adjustable light intensity – 100%, 75%, 50%, 25%
Adjustable magnetic base allows convenient attachment to metal surfaces

Disadvantages

Batteries must be charged with an external charger
When using larger-capacity 18V batteries without a protective cover, the protection rating may be reduced to IP20

FAQ

Where is this LED floodlight used?

It is used in garages, workshops, construction sites, service areas, warehouses, technical rooms, outdoor work and places without permanent lighting.

Is this floodlight suitable for outdoor use?

Yes, the floodlight has IP54 protection, so it is resistant to dust and water splashes. It is suitable for outdoor work but is not intended for immersion in water.

Does the floodlight operate from a battery?

Yes, it works with 18V power tool batteries. The battery is charged using a separate charger.

Can it be used as a work light?

Yes, the COB LED light ring is designed for wide work area illumination, making the floodlight suitable for repairs, installation and technical maintenance.