
Luminaire bracket | straight Ø48 | length 500 mm | 30° angle | plate 270×60 mm | with M12 U-bolt | Esm-GL-1-0,5-30-50
Code: Esm-GL-1-0,5-30-50Price 35.33 € VAT incl.( 29.20 € VAT excl. )Buy more, pay less10+ pcs. – 33.93 € for pcs. -3%20+ pcs. – 31.73 € for pcs. -10%Want another price? Suggest yours!Straight Ø48 mm bracket for one luminaire. Length 500 mm, angle 30°, plate 270 × 60 mm, M12 U-bolt included.
-
Luminaire bracket | straight Ø48 | length 500 mm | 30° angle | plate 270×60 mm | with M12 U-bolt | Esm-GL-1-0,5-30-50
The luminaire bracket Esm-GL-1-0,5-30-50 is a straight Ø48 mm tube welded at 30° to a 270 × 60 mm mounting plate. It is a short bracket for one luminaire, used when the luminaire has to be fixed to a pole without a long arm. An M12 U-bolt with nuts and washers is included.
Key point:
Not every lighting point needs a long arm. When the luminaire is mounted close to the pole, a short 500 mm bracket is enough. Its 30° angle aims the luminaire in the required direction straight away.Tube
Ø48 mmLength
500 mmAngle
30°Mounting
M12 U-bolt includedHow it works
The base of the bracket is a plate 270 mm long and 60 mm wide, used to fix the bracket to the pole. The plate is clamped to the pole with an M12 U-bolt with a 200 mm inner width.
The Ø48 mm tube welded to the plate is 500 mm long and set at an angle of 30°.
The luminaire is fitted onto the end of the Ø48 mm tube and tightened with its own fixing screws.
Why choose Esm-GL-1-0,5-30-50?
The bracket comes with an M12 U-bolt, two nuts and two washers, so it can be fixed to the pole straight away without extra parts.Technical specifications
Product type Luminaire bracket (straight) Product code Esm-GL-1-0,5-30-50 Design Straight tube with welded mounting plate Tube diameter Ø48 mm Tube length 500 mm Tube angle 30° Mounting plate 270 × 60 mm Number of luminaires 1 Overall dimensions 582 × 241 mm Kit contents 1 × M12 U-bolt (200 mm inner width), 2 × M12 nuts (DIN 934), 2 × 12 washers (DIN 125) Installation On a pole with a U-bolt Key features
- Ø48 mm tube – a common luminaire spigot size.
- 30° angle – the luminaire is aimed in the required direction straight away.
- 500 mm length – a compact bracket when a long arm is not needed.
- Wide mounting plate – the 270 × 60 mm plate sits firmly against the pole.
- M12 U-bolt included – fixed to the pole without drilling.
- Simple installation – the luminaire is slid onto the tube and tightened.
Where is it used?
- Yard and driveway lighting
- Car parks
- Building perimeter lighting
- Homestead and farm sites
- Mounting floodlights or luminaires on poles
- Warehouse and yard area lighting
- Path and entrance lighting
- Adapting existing poles for new luminaires
Use by need
For electricians.
A short bracket that installs quickly when the luminaire has to stay close to the pole.For homestead or farm owners.
Suitable for a yard or entrance luminaire on an existing pole.For site managers.
Lets you fit new LED luminaires with a Ø48 mm spigot to poles.Practical example
If you need to fix an LED luminaire with a Ø48 mm spigot to a yard pole and a long arm is not needed, the Esm-GL-1-0,5-30-50 is fixed to the pole, the luminaire is slid onto the tube, and the 30° angle aims it at the area to be lit.Pros
- Compact straight bracket
- Fixed 30° angle
- Ø48 mm tube fits many luminaires
- Wide 270 × 60 mm plate
- M12 U-bolt included
- Simple installation
Cons / limitations
- For one luminaire only
- Short – the luminaire stays close to the pole (up to 500 mm)
- Fixed angle
- The U-bolt has a 200 mm inner width – check the pole diameter
Safety and installation notes
- Work at height only with suitable lifting equipment and protective gear.
- Make sure the pole can carry the load of the bracket, luminaire and wind.
- Tighten the fixing nuts evenly and check that the bracket does not twist.
- Before connecting the luminaire, switch off the power and check that the line is dead.
- Route the cable without sharp bends and protect it from chafing on metal edges.
- The luminaire must be connected to the mains by a qualified electrician.
Quick selection guide
Ø48 mmLength 500 mmAngle 30°With M12 U-boltSuitable when you need to:- fix one luminaire close to the pole;
- set the luminaire at an angle of 30°;
- mount a luminaire with a Ø48 mm spigot.
Check before use:- whether the luminaire's mounting spigot fits the Ø48 mm tube;
- whether the pole diameter suits a U-bolt with a 200 mm inner width;
- whether the pole can carry the additional load.
Important reminder: the bracket does not replace a lighting design – choose luminaire power and layout according to the area to be lit.FAQ
What is the tube diameter?
Ø48 mm.What is the tube length?
500 mm.At what angle is the tube set?
30°.What size is the mounting plate?
270 × 60 mm.Are the fixings included?
Yes – an M12 U-bolt, 2 nuts and 2 washers.How many luminaires can be fitted?
One.Luminaire bracket Esm-GL-1-0,5-30-50
A straight Ø48 mm bracket, 500 mm long, set at 30°, with a 270 × 60 mm mounting plate and an M12 U-bolt included. For one luminaire on a pole.
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review

