Metal halide lamp E40 | 400W | 115V | 5500K | 34000lm | Powerstar HQI-BT 400W/D PRO Osram
Code: HQI-BT 400W/D PROPrice 36.00 € VAT incl.( 29.75 € VAT excl. )OSRAM POWERSTAR HQI-BT 400W/D PRO – 400 W E40 metal halide lamp: 34,000 lm, 5500 K, Ra 80–89. For enclosed industrial luminaires, operated via a ballast and ignitor. New, factory packed.
-
Metal halide lamp E40 | 400W | 115V | 5500K | 34000lm | Powerstar HQI-BT 400W/D PRO Osram
OSRAM POWERSTAR HQI-BT 400W/D PRO is a 400 W metal halide lamp with E40 cap delivering 34,000 lm of daylight (5500 K) with high colour rendering (Ra 80–89). Designed for enclosed industrial luminaires and floodlights with a 400 W metal halide ballast. It must not be connected directly to 230 V – a ballast and ignitor are required.
Key point:
A genuine OSRAM replacement lamp for existing 400 W E40 metal halide luminaires – in workshops, warehouses and sports halls. Daylight 5500 K and Ra 80–89 make colours and details clearly visible. New lamps in original factory packaging are in stock.Power
400 WLuminous flux
34,000 lmLight colour
5500 K, Ra 80–89Cap
E40, BT shapeOperating principle
The lamp is screwed into an E40 lampholder in an enclosed luminaire; any burning position.
When switched on, the ignitor strikes the arc in the quartz burner with a high-voltage pulse and the ballast limits the current to 4 A. 115 V is the nominal lamp (arc) voltage, not the supply voltage. The lamp reaches full output after a few minutes, and a hot lamp restrikes only after cooling.
The clear BT bulb suits luminaires with reflectors – light is directed precisely onto the work area.
Why choose HQI-BT 400W/D PRO?
Replacing a failed lamp in the same luminaire needs no ballast or luminaire change – just a lamp of the same wattage and type.Technical specifications
Product type Quartz metal halide lamp (HID), E40 Manufacturer OSRAM (LEDVANCE) Model POWERSTAR HQI-BT 400 W/D PRO EAN (unit) 4008321677860 EAN (box, 12 pcs) 4008321677877 Nominal power 400 W Rated power 430 W Nominal lamp voltage 115 V Nominal current 4 A Luminous flux 34,000 lm Luminous efficacy ~79 lm/W Colour temperature 5500 K, daylight (D) Colour rendering index (Ra) 80–89 (light colour code 855) Cap E40 Bulb bulged tubular (BT), clear, with UV filter Burning position Any Length 290 mm Diameter 62 mm Light centre length (LCL) 175 mm Lifetime (B50) 16,000 h Compensation capacitor (50 Hz) 45 µF Ignition voltage 4.0 / 5.0 kVp Mercury content 69 mg Dimmable No Energy efficiency class G Energy consumption 430 kWh / 1000 h Weight 220 g Control gear Conventional ballast (CCG) + ignitor Luminaire Enclosed only (IEC 61167) Main features
- 34,000 lm – lights large high-ceiling areas
- Daylight 5500 K – natural, clear view in work areas
- Ra 80–89 – more accurate colour recognition – markings, cables, products
- E40 cap – fits standard industrial luminaires
- 16,000 h lifetime (B50) – less frequent replacement in high-mounted luminaires
- Any burning position – mounting flexibility in floodlights and pendant luminaires
Where is it used?
- Production workshops
- Warehouses and logistics centres
- Sports and multi-purpose halls
- Exhibition halls and shopping centres
- Façade and area floodlights (enclosed)
- Servicing existing metal halide luminaires
Use by need
For electricians and maintenance companies.
Genuine OSRAM lamp to replace a failed one without changing the luminaire or ballast.For plant or warehouse energy managers.
Uniform light colour across the hall when only some lamps are replaced.For sports or exhibition hall managers.
Daylight 5500 K and high Ra – a good view for spectators and cameras.Practical application
If one 400 W E40 luminaire in a hall has gone out while the others give daylight, replace the lamp with HQI-BT 400W/D PRO – wattage, cap and colour match. If the new lamp does not start or flickers, check the ignitor and ballast.Pros
- 34,000 lm luminous flux
- Daylight 5500 K, Ra 80–89
- 16,000 h lifetime
- Genuine OSRAM product, factory packaging
- Fits existing luminaires without modification
Cons / limitations
- Not dimmable
- Takes a few minutes to run up; a hot lamp restrikes only after cooling
- Enclosed luminaires only
- Contains mercury – for new projects consider LED luminaires
Safety and installation notes
- Switch off the power and let the lamp cool before replacing.
- Use only in an enclosed luminaire with a protective glass (IEC 61167).
- The ballast and ignitor must be rated for a 400 W metal halide lamp.
- Do not connect directly to 230 V mains.
- If the lamp breaks, ventilate the room, collect the fragments without a vacuum cleaner and dispose of them as hazardous waste.
Quick selection guide
400 WE405500 K34,000 lmRa 80–89BT, clearSuitable when you need:- to replace a 400 W E40 metal halide lamp
- daylight 5500 K
- good colour rendering in the work area
Check before use:- the wattage and type of the old lamp (HQI / MH, not sodium or mercury)
- that the ballast is rated for a 400 W metal halide lamp
- that the luminaire is enclosed
- that a 290 mm long, Ø 62 mm lamp fits the luminaire
Important reminder: a metal halide lamp is not a direct replacement for a sodium (SON) or mercury (HQL) lamp – a suitable ballast and ignitor are required.FAQ
Can it be connected directly to 230 V?
No – a 400 W metal halide ballast with ignitor is required.Can it replace a sodium lamp?
Only if the luminaire ballast and ignitor are suitable for metal halide lamps – please check.Are the lamps new?
Yes, new, in original OSRAM packaging.Can the brightness be dimmed?
No, the lamp is not dimmable.Why does the lamp not restart right after switching off?
A hot metal halide lamp must cool down before it restrikes.Is a larger quantity available?
Yes, in stock in Šiauliai – we will make an individual offer for larger quantities.Metal halide lamp E40 | 400W | 115V | 5500K | 34000lm | Powerstar HQI-BT 400W/D PRO Osram
OSRAM POWERSTAR HQI-BT 400W/D PRO – 400 W E40 metal halide lamp, 34,000 lm, 5500 K, Ra 80–89, for enclosed industrial luminaires. Order at elsprendimai.eu or collect in Šiauliai, J. Basanavičiaus g. 23, Lithuania.
Published: 2026-11-17 · Data verified against the manufacturer datasheet: 2026-11-17
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThis product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review






