Products catalog

  • Microwave radar motion sensor | lighting controller for LED strips | 5-24VDC | 5A | 5.8GHz

    Code: ES-TIP-2303

    This microwave radar sensor switch is an advanced solution for automatic lighting control, utilizing human motion detection to turn the lights on and off without physical contact. It is ideal for various spaces such as corridors, staircases, closets, yards, garages, parking lots, and other areas where a convenient and energy-saving lighting solution is required.

    The sensor automatically turns on the light when motion is detected and switches it off after a set time when no motion is detected. The device works reliably even in low ambient light conditions, featuring high sensitivity and a low frequency of false triggers. 

  • Technical Specifications

    Operating Voltage: DC 5V–24V
    Current: Maximum 5A
    Standby Power Consumption: 0.02W
    Transmission Power: <10mA
    Operating Frequency: 5.8 GHz
    Sensitivity Range: 5-8 meters
    Detection Angle: 360°
    Delay: 30 seconds
    Dimming Capability: None
    Power Connector: DC5521 (male input, female output)
    Maximum Load Power: 5V: ≤ 25W / 12V: ≤ 60W / 24V: ≤ 120W

    Features and Usage

    Automatic On/Off – Detects human motion, turning on the lighting and turning it off after a set time.
    High Sensitivity – 5.8 GHz microwave technology accurately detects living objects and reduces the likelihood of false triggers.
    Energy Saving – Lights turn on only when motion is detected and lighting is necessary.
    Stable Operation – Resistant to environmental interference, not sensitive to temperature or sound changes.
    Wide Application – Suitable for stairs, corridors, yards, parking lots, closets, garages, etc.
    360° Detection – Microwave technology enables detection of movement in all directions.
    Easy Installation – Easily integrated with LED strips and other lighting solutions.
    Pros:

    Very sensitive – Detects human movement even through thin walls.
    Energy-saving – Lighting only turns on when needed.
    Automatic mode – No physical contact required.
    Wide application range.
    Not sensitive to sound or temperature changes.
    Cons:

    Not suitable for outdoor use without additional moisture protection.
    Fixed 30-second delay – No manual adjustment possible.
    Requires careful installation due to the 360° detection zone.
    Important Notes Before Use

    Disconnect power before installation – The device operates with direct current, so safety measures must be followed.
    Do not use outdoors without additional moisture protection.
    The device is not intended for disassembly – Improper installation may cause malfunctions or safety hazards.
    Use only with compatible LED strips or lighting systems.
    This microwave radar switch is a convenient and efficient solution for those seeking automatic lighting that helps save energy and increase comfort at home or in commercial spaces. It is an excellent choice for avoiding unnecessary electricity use and ensuring convenient lighting control. 

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

  • Subscribtion to new arrivals

    privacy policy

    Information