Products catalog

  • Modular impulse (latching) relay with memory | 230 V AC | 16 A | 1 NO | DIN 1 module | OURTOP AULT003

    Code: AULT003

    Impulse (step) relay for controlling lighting from several places: each short push-button pulse to A1/A2 toggles output contact 1-2.

  • Modular impulse (latching) relay with memory | 230 V AC | 16 A | 1 NO | DIN 1 module | OURTOP AULT003

    Impulse (step) relay for controlling lighting from several places: each short push-button pulse to A1/A2 toggles output contact 1-2. The memory function keeps the state after a power failure.

    Key point:
    Lighting from several places the simplest way: push-buttons wired in parallel and one impulse relay in the panel instead of complex two-way and intermediate switch circuits. The memory function keeps the state through a power cut.
    Contact rating
    16 A, 1 NO
    Supply voltage
    230 V AC
    Function
    state memory
    Mounting
    DIN 1 module

    Operating principle

    The relay mounts on a 35 mm DIN rail. 230 V AC is applied to coil terminals A1/A2 through push-buttons wired in parallel, and the lighting is switched through contact 1-2.

    Each short press toggles the contact: on – off. The number of push-buttons is practically unlimited.

    The memory function keeps the state through a power cut, and an LED shows whether the circuit is on.

    Why choose AULT003?
    Instead of two-way and intermediate switch circuits – simple push-buttons with thinner wires to them, while the load itself is switched only in the panel.

    Technical specifications

    Product typeImpulse (step) relay
    Manufacturer / modelOURTOP AULT003
    Supply voltage230 V AC, 50/60 Hz
    Contact rating16 A, 1 NO (1-2)
    External controlPush buttons to A1/A2
    FunctionState memory after power loss, LED indication
    MountingDIN 35 mm, 1 module
    MarkingCE

    Key functions

    • Impulse control – each press toggles the state.
    • Unlimited push-buttons – control from many places.
    • State memory – the state is kept after a power cut.
    • LED indication – state visible in the panel.
    • 16 A NO contact – for a lighting group.

    Where is it used?

    • Staircases and long corridors
    • Large rooms with several entrances
    • Warehouses and workshops
    • Lighting group control in the panel
    • Replacing old mechanical impulse switches
    • Cottages and detached houses

    Use by need

    For the electrician.
    A simpler scheme: buttons in parallel, load only through the panel.
    For the apartment building manager.
    Staircase lighting from every floor without complex switch circuits.
    For the homeowner.
    A long corridor or large living room controlled from several places with ordinary buttons.

    Practical example

    If a corridor has three doors and each needs a switch, AULT003 in the panel with three push-buttons in parallel replaces a two-way plus intermediate switch scheme, and the state is not lost in a power cut.

    Advantages

    • Control from any number of places
    • State memory during power cuts
    • LED state indication
    • 16 A contact
    • One DIN module

    Limitations

    • One NO contact – one group
    • Control by 230 V AC pulses only
    • Illuminated push-buttons are not suitable unless the manufacturer allows them
    • No overload or short-circuit protection – a circuit breaker is required

    Safety and installation notes

    • Install only with the power disconnected; work in the panel must be done by a qualified electrician.
    • Protect the supply and load circuits with a circuit breaker selected for the cable and load.
    • Wire the push-buttons in parallel and use momentary (non-latching) buttons only.
    • Do not exceed 16 A; leave a margin or use a contactor for LED groups with high inrush.

    Quick selection guide

    16 A, 1 NO
    230 V AC
    memory
    DIN 1 module
    Suitable when you need:
    • Control lighting from several places
    • Simplify a two-way switch scheme
    • The state to survive a power cut
    Check before use:
    • That the buttons are momentary and non-illuminated (unless allowed)
    • Lighting group current does not exceed 16 A
    • Control voltage is 230 V AC
    Important: AULT003 switches lighting but is not a protective device – the circuit must still be protected by a circuit breaker.

    FAQ

    How many buttons can be connected?
    Practically unlimited – they are wired in parallel.
    What happens in a power cut?
    The memory function keeps the previous state.
    Which buttons are suitable?
    Momentary (non-latching) 230 V push-buttons.
    What load can be connected?
    Up to 16 A through contact 1-2.
    Is the state visible in the panel?
    Yes, an LED indicator shows it.
    How much panel space does it take?
    One DIN module.

    Modular impulse (latching) relay with memory | 230 V AC | 16 A | 1 NO | DIN 1 module | OURTOP AULT003

    AULT003 is a modular 230 V AC impulse relay, 16 A, 1 NO with state memory and LED indication. It lets lighting be controlled from any number of places in staircases, corridors and large rooms.

    Published: 2026-11-19 · Data verified against the manufacturer specification: 2026-11-19

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • privacy policy

    Information