Network switch 6 ports | 4xPoE | 2xuplink | 1.2Gbps | 0,9Mpps | FS1006P CUDY

Technical Specifications:

Number of ports: 6 (4 x 10/100Mbps PoE + 2 x 10/100Mbps uplink)

Network standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x

PoE standards: IEEE802.3af (15.4W), IEEE802.3at (30W)

Total PoE power budget: 60W (max. 30W per PoE port)

PoE compatibility: Automatic AF/AT device detection

PoE power voltage: DC 52V

PoE wiring scheme: 1/2(+) and 3/6(-)

Transmission speed: 10/100Mbps (auto)

Transmission method: Store-and-Forward

Data forwarding rate: 0.9 Mpps

Total bandwidth: 1.2Gbps

MAC address table: 1K

Packet buffer memory: 448K

Power input: AC 100–240V, 50/60Hz

Power output: 52V, 1.25A

MTBF: 100,000 hours

Dimensions: 200mm x 120mm x 45mm

Features:

PoE+ support: Powers IP devices via Ethernet cable

AI port recognition: Automatic protection for non-PoE devices

VLAN mode: Isolates PoE ports (1–4) to reduce traffic conflicts

Extend mode: Extends data and power transmission up to 250 meters (10Mbps)

Flow control: IEEE802.3x full/half-duplex

LED indicators: Clear power, activity, and link status for each port

Applications:

IP video surveillance systems

Office and commercial buildings

Hotels, schools, community centers

Small network infrastructure expansion

Temporary event network setups

Pros:

Built-in PoE+ – no separate power supply needed for IP devices

Suitable for long distances – Extend mode up to 250m

VLAN isolation – safer and more stable network

Automatic power prioritization – key devices always powered

Simple installation – plug-and-play, no configuration required

Reliable operation down to -20 °C

Cons:

Only 10/100Mbps – not suitable for gigabit data

Unmanaged – no network analysis or control features

Limited PoE budget (60W) – supports only a few high-power devices

Limited speed in Extend mode (10Mbps) – may be too slow for high-traffic devices