Photoelectric sensor | Through-beam type | Transmitter + receiver | 2000 mm | 21,8x14,5x8,4mm | 10-30VDC | NO | PNP | 2 m cable | ABS | Red light beam | IP65

Technical Specifications

Detection type: Through-beam
Nominal detection distance: 2 m (non-adjustable)
Light source: Red light (640 nm)
Beam diameter: ~80 mm at 2 m distance
Directional angle: Emitter ±1°, receiver ±4°
Standard target: ≥ φ5 mm opaque object
Minimum detectable target: ≥ φ3 mm (with proper sensitivity adjustment)
Output type: PNP, NO
Response time: ≤ 1 ms
Supply voltage: 10…30 V DC
Current consumption: ≤ 10 mA (emitter); ≤ 15 mA (receiver)
Load current: ≤ 50 mA
Voltage drop: ≤ 1.5 V
Protection: Short-circuit, reverse polarity, surge protection
Indicators: Green LED – power status and stable signal; Yellow LED – output signal
Light immunity: Sunlight ≤ 10,000 lux; Lamp light ≤ 3,000 lux
Operating temperature: -25…+55 °C
Storage temperature: -25…+70 °C
Protection rating: IP65
Housing: ABS plastic
Lens: PMMA
Connection: 2 m PVC cable
Set includes: 2 pcs M3×16 mm screws, 2 nuts, user manual

Functions and Operating Principle

The sensor operates on the through-beam principle – a light beam is transmitted from the emitter to the receiver module.
When an object passes between them and interrupts the light path, the receiver detects the interruption and outputs a signal.
This operation ensures very high detection accuracy and low false trigger probability, making it suitable even for small or fast-moving objects.

Use and Application

For home users or hobbyists: Suitable for object detection in workshops or individual automation projects.
For engineers / automation specialists: Used in robotics, production lines, conveyors, counting or positioning systems.
For electricians / technicians: Easy installation due to compact housing; clear LED indicators help quickly determine the operating state and detect faults.

Pros

Compact size – suitable for confined spaces

Accurate and fast response

High resistance to ambient light and interference

Dust and moisture resistant

Visible red beam – easy alignment

Cons

Requires precise alignment of emitter and receiver

Cannot detect transparent or light-transmitting objects