Power socket block | furniture-mounted | with cover | 2xSchuko | 4xAudio | 4xRJ45 | 285x220x119mm | 1.5m cable | IP21 | silver

The box is recessed into the desktop through a 270x207mm mounting cut-out. The overall dimensions of the upper section are 285x220mm, while the housing depth is approximately 119mm. The closable design helps maintain a neat desktop surface, while the cable brushes allow cables to be routed even when the upper cover is closed.

The overall dimensions of the upper section are 285x220mm, but the required desktop cut-out is smaller at 270x207mm. Before cutting the desktop, it is recommended to physically check the actual product, fastening elements and desktop thickness.

Integrated cable brushes in the upper section allow power, telephone, audio and other cables to be routed through the desktop. The brush strips reduce the visible area of the open cable aperture and help maintain a cleaner and more organised workspace.

The IP21 rating provides basic protection against the ingress of larger solid objects and vertically falling water drops. This connection box is intended for use in dry indoor environments. It should not be installed in locations exposed to direct water, high moisture or outdoor conditions.

The recessed desk connection box is suitable for locations where connections need to be accessible only when required. Opening the cover provides access to power and signal connections, while closing the upper section helps maintain a cleaner desktop appearance. The cable brushes allow cables to remain connected and be routed from the box to the workspace.

• 2 Schuko power sockets allow the main electrical equipment at the workstation to be connected.
• 4 Audio connections provide additional signal connection options.
• 4 RJ45 connections are intended for telephone or other compatible communication lines.
• Concealed recessed design helps maintain a neat desktop appearance.
• Integrated cable brushes allow cables to be routed neatly through the desk.
• 285x220mm upper frame covers the edges of the 270x207mm mounting cut-out.
• 1.5m power cable provides flexibility when connecting the unit below the desk.
• Metal alloy construction is suitable for stationary furniture installation.
• Black and silver finish suits modern office and conference furniture.

• Large desktop cut-out required: installation requires an opening of approximately 270x207mm.
• 119mm installation depth: sufficient free space must be available below the desktop for the housing and cables.
• IP21 protection: the product is intended for dry indoor environments, not damp or outdoor locations.

A recessed connection box with a 270x207mm mounting cut-out is installed in the centre of a conference table. When the connections are not in use, the upper section is closed to maintain a neat desktop appearance. During a meeting, the cover is opened and laptop power adapters are connected to the two Schuko sockets, while the Audio and RJ45 connections are used for conference or communication equipment. Cables are routed through the integrated brushes, allowing some cables to remain connected even when the upper section is closed.

The box has two integrated Schuko power sockets.

The box has four Audio connections.

The box has four telephone connections.

The overall dimensions are 285x220x119mm.

The mounting cut-out is approximately 270x207mm.

The power cable is 1.5m long.

The main construction is made of metal alloy; the visible upper section is silver, while the lower housing is black.

They allow cables to be routed from below the desktop into the working area and help conceal most of the open cable aperture.

The protection rating is IP21.

No. The IP21 protection rating and this type of construction are primarily intended for dry indoor environments.

The cable pass-through brushes are designed to allow cables to be routed out of the connection area while maintaining a neater desktop surface. Whether the box can be fully closed depends on the thickness of the cables and the size of the plugs used.

Before cutting the desktop, the actual product dimensions and mounting construction must be checked. The approximately 270x207mm mounting opening should only be prepared after confirming that there is at least 119mm of depth below the desktop, plus sufficient additional space for cables. Power and signal cables must be routed so that they are not pinched by moving cover components. The IP21-rated product must be used in a dry indoor environment.