Products catalog

  • Quarter-turn cabinet door lock | 90° | double-bit insert | zinc alloy | RAL 7035 | with key | MS813

    Code: ES-MS813-7035

    MS813 is a quarter-turn cam lock for the doors of metal electrical distribution boards, automation and control cabinets.

  • Quarter-turn cabinet door lock | 90° | double-bit insert | zinc alloy | RAL 7035 | with key | MS813

    MS813 is a quarter-turn cam lock for the doors of metal electrical distribution boards, automation and control cabinets. Turning the key 90° makes the steel tongue engage the cabinet frame and the door stays locked. The double-bit insert is the standard solution where only technical staff should open the board.

    Key point:
    A broken or loose lock is the most common reason a board door stays ajar. MS813 replaces a damaged lock in minutes, and the light grey RAL 7035 colour matches most industrial boards and cabinet housings.
    Operation
    90° quarter-turn
    Insert
    double-bit
    Housing
    zinc alloy, RAL 7035
    Package
    lock + key

    Operating principle

    The lock is inserted into a square cut-out in the door and clamped from inside with a retaining plate. The tongue is fixed to the end of the shaft with a screw.

    Insert the key and turn it 90° – the tongue rests against the cabinet frame or catch and the door is locked. Turn it back and the tongue retracts, the door opens.

    Result – the door is held against the housing, and unauthorised persons cannot open the board without the special key.

    Why choose MS813?
    A simple, compact and low-cost way to restore or fit board locking – no lock cylinders, just the widely used double-bit key.

    Technical specifications

    Product type Cam (quarter-turn) lock for cabinet doors
    Manufacturer Pengkai
    Model MS813 (PS001Z1C001)
    Operation 90° turn
    Insert type Double-bit
    Housing material Zinc alloy, painted
    Tongue Zinc-plated steel
    Colour RAL 7035 (light grey)
    Front part dimensions 30 × 34 mm
    Door cut-out 22 × 22 mm (square)
    Depth behind the door 21 mm
    Tongue dimensions 44 × 20 × 4.2 mm (length × width × thickness)
    Mounting Into a square cut-out, fixed with a retaining plate from inside
    Package contents Lock with tongue, fixing parts, key

    Key features

    • Quarter-turn mechanism – the door is locked and unlocked with a single 90° turn.
    • Double-bit insert – only the holder of a special key opens the board, not anyone with a screwdriver.
    • Zinc alloy housing – robust, does not deform with frequent use.
    • Zinc-plated steel tongue – corrosion resistant, engages the frame securely.
    • RAL 7035 colour – matches standard board housings.
    • No welding or riveting – a cut-out and the retaining plate are all you need.

    Where is it used?

    • Metal electrical distribution boards
    • Automation and control cabinets
    • Telecom and network cabinets
    • Metering and incoming supply boards
    • Battery and power equipment boxes
    • Service hatches of industrial equipment
    • Replacing broken board locks during repairs

    Use by need

    For panel builders.
    A low-cost standard lock for series production, bought in batches.
    For building managers.
    Quick replacement of a broken lock without replacing the whole board door.
    For electricians on service jobs.
    A spare lock always at hand for repair call-outs.

    Practical use

    If the lock on a stairwell board in an apartment block breaks and the door no longer closes, unscrew the old lock, check the shape and size of the cut-out, fit MS813, tighten the plate and adjust the tongue – the board can again be locked with the same double-bit key.

    Pros

    • Simple and quick installation
    • Widely used double-bit key
    • Robust zinc alloy housing
    • Corrosion-resistant zinc-plated tongue
    • RAL 7035 matches most board housings
    • Good price when replacing several locks
    • The same lock is available in RAL 7035 and RAL 7032

    Cons / limitations

    • The double-bit key is widely available – this is not burglary protection; for that choose a cylinder lock
    • Fits a square cut-out only – a round cut-out needs a different lock type
    • No handle – for large, heavy doors a handle lock is better

    Safety and installation notes

    • When replacing the lock in a live board, do not touch live parts and follow safety rules.
    • Before ordering, check the cut-out shape and size against the old lock.
    • Adjust the tongue so that the door closes without a gap but is not over-compressed.
    • Leave the door gasket in place – the lock does not replace it.
    • Do not overtighten the retaining plate – thin doors may deform.

    Quick selection guide

    90° turn
    Double-bit
    Zinc alloy
    RAL 7035
    With key
    Suitable when you need to:
    • replace a broken board lock
    • restrict access to the board for unauthorised persons
    • fit a lock in a newly built board
    Check before use:
    • the door cut-out (22 × 22 mm required)
    • door thickness and where the tongue engages
    • whether the key type used on site matches
    Important reminder: a double-bit lock restricts access but is not a burglary protection device.
    Which colour to choose?
    RAL 7035 (light grey) is today's standard for most board and cabinet housings. RAL 7032 (dark grey) is mostly found on older boards and cabinets. Mechanism, key, cut-out and mounting are identical in both versions – only the colour differs.
    Other colour version: MS813 RAL 7032

    FAQ

    Is the key included?
    Yes, the lock is supplied with a key.
    How far does the key turn?
    A 90° turn is enough to lock and unlock.
    Will it fit a round cut-out?
    No, the lock is designed for a square cut-out.
    What size of cut-out is needed?
    A square 22 × 22 mm cut-out in the door.
    Is it suitable for plastic boxes?
    The lock is designed for metal doors; plastic boxes usually use locks of a different design.
    Does it protect against theft?
    No, it restricts access for unauthorised persons but is not a security lock.
    What is the difference between the RAL 7035 and RAL 7032 versions?
    Only the colour: RAL 7035 is light grey, RAL 7032 is dark grey. Mechanism, key and cut-out are the same.
    What colour is the lock?
    Light grey, RAL 7035.

    Cabinet lock MS813 | 90° | double-bit | RAL 7035

    The MS813 quarter-turn lock with a double-bit key is a simple and reliable solution for locking the doors of electrical distribution boards, automation and telecom cabinets, and for replacing broken locks.
    Published: 2026-11-11 · Data verified against the manufacturer's catalogue sheet: 2026-11-12

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Lock for electrical panels | with cross key | 17 mm | zinc alloy + copper core | 2 keys | chrome-plated
    Code: ES-610719

    Lock (key-operated lock), designed for electrical distribution boards, equipment cabinets, mailboxes, toolboxes and other metal enclosures. Durable zinc alloy construction with a copper core ensures smooth operation, long service life and resistance to wear. The 90° rotation mechanism allows quick and secure locking / unlocking. An excellent choice for those looking for an economical, universal and easy-to-install solution for industrial and residential enclosures. 

    Price 3.59 € VAT incl.
    ( 2.97 € VAT excl. )
    Quarter-turn cabinet door lock | 90° | double-bit insert | zinc alloy | RAL 7032 | with key | MS813
    Code: ES-MS813-7032

    MS813 is a quarter-turn cam lock for the doors of metal electrical distribution boards, automation and control cabinets.

    Price 8.65 € VAT incl.
    ( 7.15 € VAT excl. )
    Lock for electricity metering cabinet with metal triangular key | IP54 | 4606056137705
    Code: 4606056137705

    Lock for electrical meter cabinet with metal triangular key, designed for locking the doors of electrical metering cabinets, distribution boxes, technical cabinets, control boxes, and other electrical equipment. This lock helps restrict unauthorized access to electrical installations, metering devices, circuit breakers, and other control components.

    Due to its IP54 protection rating, the lock is suitable for use in environments where dust or water splashes may be present. The metal triangular key ensures simple, convenient, and standardized unlocking for maintenance personnel, electricians, and authorized staff. 

    Price 6.50 € VAT incl.
    ( 5.37 € VAT excl. )
  • privacy policy

    Information