Radial scroll-housing fan | steel | 230V | D120 | 128×207×188mm | blue | Turbo Classic 120 2P | 4772318404044
Code: 03046Radial scroll-housing fan Turbo Classic 120 2P: 230 V, up to 450 m³/h, Ø120 mm connection, steel housing IP44. For local supply, extraction and cooling.
-
Radial scroll-housing fan | steel | 230V | D120 | 128×207×188mm | blue | Turbo Classic 120 2P
Compact radial (centrifugal) fan with a scroll housing for local air supply or extraction. The single-phase 230 V 2-pole motor delivers up to 450 m³/h, and the scroll housing builds enough pressure to overcome short ducts, grilles and filters.
Key point:
Turkish-made Turbo Classic series fan: powder-coated steel housing, galvanised steel impeller with forward-curved blades and IP44 protection – suitable for workshops, boiler rooms, equipment cooling and small ventilation systems.Airflow
450 m³/hPower supply
230 V / 1~Connection
Ø120 mmProtection
IP44We will help you set up speed and automatic control
We will advise how to adjust this fan's speed and how to switch or control it automatically according to room conditions – humidity, temperature or CO₂ concentration. We will select a suitable speed controller, thermostat, humidity or CO₂ sensor and explain how to connect them.
Contact us: tel. +370 658 01033 or e-mail info@elsprendimai.eu
In your e-mail, briefly describe the situation: room purpose and size, fan model and what you want to control – speed, humidity, temperature or CO₂.
Wholesale quantities: special prices for larger orders. State the required quantity in your e-mail and we will send you an individual offer.
Operating principle
The forward-curved impeller draws air in through the axial inlet, protected by a metal mesh, and the scroll housing turns it 90° to the outlet. The radial design produces higher pressure than an axial fan of the same size.
The fan can be used for supply or extraction, depending on which opening is connected to the duct. The stated 450 m³/h is achieved at zero resistance; airflow drops as the duct gets longer.
Why choose this fan?
Small housing and high pressure – a practical choice where air must be pushed through a duct or filter and an axial fan is not enough.Technical specifications
Product type Radial (centrifugal) scroll-housing fan Model Turbo Classic 120 2P Code 03046 Country of origin Turkey Motor 2-pole, single-phase Power supply 230 V, 50 Hz Max. airflow 450 m³/h Connection diameter Ø120 mm Dimensions (W × H × D) 128×207×188 mm Housing Cold-rolled steel, powder coated Impeller Galvanised steel, forward-curved blades Insulation class B Protection class IP44 Colour blue EAN 4772318404044 Main functions
- Airflow – Up to 450 m³/h for local supply or extraction.
- Radial pressure – Overcomes the resistance of short ducts, grilles and filters.
- Protected inlet – Metal mesh keeps foreign objects out.
- Durable housing – Painted steel, IP44 protection against particles and splashes.
- Speed control – Speed can be adjusted with a single-phase triac speed controller.
Where is it used?
- Air supply for solid-fuel boilers
- Workshops and garages
- Cooling of equipment and control cabinets
- Dryers and greenhouses
- Small extraction systems
- Process air supply
Use by need
For installers.
Compact housing and standard 230 V supply – easy installation.For businesses.
Reliable local ventilation or cooling without a complex system.For DIY users.
Suitable for home-made dryers, air blowing and cooling.Practical application
When selecting a model, consider the required air volume and duct length: the stated airflow is achieved at zero resistance. If you need more air in the same size, choose the enlarged-stator version.Pros
- Up to 450 m³/h airflow
- Compact scroll housing
- Powder-coated steel, IP44
- Suitable for supply and extraction
Cons / limitations
- Airflow drops as duct resistance increases
- Not for explosive atmospheres or aggressive gases
- Not for fire smoke extraction
Safety and installation notes
- Installation and connection must be carried out by a qualified electrician
- Fit a circuit breaker in the supply circuit
- Mount the fan on a solid base
- Disconnect power before maintenance
- Keep inlet and outlet unobstructed
Quick selection guide
450 m³/h230 VØ120 mmIP44Suitable when you need:- blow air into a solid-fuel boiler or stove
- cool equipment or a control cabinet
- extract air from a small room via a duct
Check before use:- whether 450 m³/h is enough
- whether the Ø120 mm connection fits
- whether there is space for mounting
Important reminder: A radial fan works best with a short duct without sharp bends.FAQ
Can it be used for both supply and extraction?
Yes – it depends on which opening is connected to the duct.Can the speed be controlled?
Yes, with a single-phase triac speed controller.What is the enlarged-stator version?
A more powerful motor in the same housing – higher airflow.Is it suitable for boiler air supply?
Yes, scroll fans are commonly used to blow air into solid-fuel boilers.Can it be installed outdoors?
Only under a canopy: IP44 protects against splashes, not downpours.Turbo Classic 120 2P radial fan 450 m³/h, 230 V
Radial scroll-housing fan Turbo Classic 120 2P: 230 V, up to 450 m³/h, Ø120 mm connection, steel housing IP44. For local supply, extraction and cooling.
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThis product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Price 88.33 € VAT incl.( 73.00 € VAT excl. )Flexible aluminum air duct | for ventilation | ventilation systems | D120mm | 3,15m | silver | LAO120UCode: 18716Price 6.63 € VAT incl.( 5.48 € VAT excl. )





























