Products catalog

  • Ring blower (side channel compressor) | 3-phase | 1.1 HP | 98 CFM | Fuji Electric VFC400A-7W | used

    Code: VFC400A-7W-N
  • Ring blower (side channel compressor) | 3-phase | 1.1 HP | 98 CFM | Fuji Electric VFC400A-7W | used

    Used, working Fuji Electric VFC400A-7W ring blower – a three-phase side channel compressor for blowing air or creating vacuum. Suitable for vacuum grippers and lifters, aeration, pneumatic conveying, drying and for replacing the discontinued VFC400 series in existing equipment.

    Key point:
    The VFC400A-7W is no longer produced, so for equipment designed around this exact model a working original blower is the simplest repair route – no need to rework mounting, connections or piping. A ring blower has no lubricated sliding parts in contact with the air, so it delivers clean, oil-free air.
    Power
    1.0–1.1 HP (~0.8 kW)
    Max. flow
    98 CFM (~166 m³/h)
    Max. pressure difference
    54.5 in H₂O (~136 mbar)
    Condition
    Used, working

    Operating principle

    A multi-blade impeller mounted on the motor shaft rotates in the ring channel of the housing. Air is swirled repeatedly between the blades and the channel, gaining pressure on every turn – giving a smooth, pulsation-free flow without pistons or valves.

    Connect the system to the suction side and the blower creates vacuum (e.g. for a vacuum gripper); connect it to the discharge side and it supplies air (e.g. for aeration). The motor is three-phase, 2-pole, with 9 leads: it is adapted to the supply voltage by the connection in the terminal box.

    Why choose the VFC400A-7W?
    It is an original unit of a discontinued model: a one-to-one replacement in existing equipment, with no new brackets or fittings.

    Technical specifications (per factory nameplate)

    Product type Ring blower / side channel compressor (ring compressor)
    Manufacturer Fuji Electric Motor Co., Ltd. (made in Taiwan)
    Model VFC400A-7W
    Phases / poles 3 phases, 2 poles
    Frequency 50 / 60 Hz
    Voltage 200–240 V / 400–480 V (60 Hz, manufacturer datasheet); nameplate: 200–230 V / 460 V
    Power 1.0–1.1 HP (200–230 V) / 1.1 HP (460 V)
    Max. current 3.3–2.8 A (200–230 V) / 1.4 A (460 V)
    Max. pressure difference 54.5 in H₂O (~136 mbar)
    Max. air flow 98 CFM (~166 m³/h)
    Motor leads 9 leads (T1–T9), Y connection
    Markings CE, UL, CSA
    Serial No. 0701J774861 13
    Condition Used, working; housing shows signs of use
    Max. vacuum 50 in H₂O (~124 mbar)
    Thermal protection Built into the motor
    Construction Aluminium housing, impeller and base; removable threaded flanges
    Weight 21.5 kg

    Manufacturer datasheet with dimension drawing: Fuji Electric VFC40 (PDF)

    Main functions

    • Vacuum generation – for vacuum grippers, lifters and tables.
    • Air blowing – for aeration, bubbling and drying.
    • Clean oil-free air – the compression chamber is not lubricated.
    • Smooth flow – without the pulsation of piston compressors.
    • Flexible connection – 9 leads allow the motor to be adapted to different supply voltages.

    Where is it used?

    • Vacuum lifters for sheets and panels
    • Vacuum hold-down on CNC routers and cutting tables
    • Wastewater and pond aeration
    • Pneumatic conveying of bulk materials
    • Drying and blow-off units on production lines
    • Packaging and printing machines
    • Spare part for equipment with a Fuji VFC400 series blower

    Use by need

    Plant electrical engineer.
    Quickly gets stopped equipment back to work when a new VFC400 is no longer available.
    Equipment builder / designer.
    An affordable vacuum or air source for a self-built gripper or table.
    Farm and pond owner.
    For aeration and air supply where three-phase power is available.

    Practical use

    If the VFC400 blower in a vacuum lifter has failed and the manufacturer no longer supplies the model, you mount this blower in the same place with the same pipes, connect the motor for your supply voltage – and the lifter works again without design changes.

    Pros

    • Original Fuji Electric unit
    • Working, tested
    • Price well below a comparable new blower
    • Oil-free air, smooth flow
    • Suitable for both vacuum and blowing

    Cons / limitations

    • Used – no manufacturer warranty
    • Nameplate values are stated for the US market; confirm 50 Hz data with the manufacturer
    • Three-phase supply only (a single-phase network needs a 1-phase→3-phase frequency inverter)
    • Housing shows signs of use

    Safety and installation notes

    • Connection must be made by a qualified electrician; the motor must be earthed.
    • Before connecting, check the terminal connection for your supply voltage (diagram on the nameplate).
    • Protect the motor with a motor protection circuit breaker set to the actual current.
    • Check the direction of rotation – the wrong direction reduces performance.
    • Do not run with the suction / discharge closed – it overheats; use a relief valve if needed.
    • Fit an air filter on the suction side – dust and liquids damage the impeller.

    Quick selection guide

    3 phases
    1.1 HP
    98 CFM
    54.5 in H₂O
    Suitable when you need:
    • to replace a failed Fuji VFC400 blower
    • a vacuum source for a gripper or table
    • clean air for aeration or blowing
    Check before use:
    • that a three-phase supply is available
    • that flow and pressure are sufficient for your equipment
    • the connection sizes
    Important reminder: a ring blower does not replace a compressed-air compressor – it is designed for high flow at a low pressure difference.

    FAQ

    Does the blower work?
    Yes, the blower is working.
    Is it suitable for a 3×400 V network?
    Yes – the manufacturer specifies a 400–480 V range (high-voltage connection); confirm 50 Hz parameters with the manufacturer data.
    Can it be connected to a 230 V household supply?
    Not directly – you will need a 1-phase 230 V → 3-phase frequency inverter.
    Can it create vacuum?
    Yes, when the system is connected to the suction side.
    Can I inspect it before buying?
    Yes, in Šiauliai, J. Basanavičiaus g. 23.
    Is there a warranty?
    The item is used; the manufacturer's warranty does not apply.

    Ring blower Fuji Electric VFC400A-7W | used

    Used, working three-phase side channel blower Fuji VFC400A-7W, 1.1 HP, 98 CFM – for vacuum and air blowing, an original replacement unit for a discontinued model.
    Published: 2026-11-21 · Data verified against the manufacturer nameplate and datasheet: 2026-11-21

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Subscribtion to new arrivals

    privacy policy

    Information