Roof Access Hatch | with Gas Struts | 600x600mm | Aluminium

Gas lifting struts compensate for part of the lid weight and help keep it in the open position. This makes the hatch easier to open and reduces the risk of the lid unexpectedly closing while the user is passing through the opening. The integrated handle with lock allows convenient opening and closing of the hatch.

After releasing the hatch lock, the lid is lifted with the assistance of the gas struts. The struts reduce the weight load that the user must lift and help keep the lid open. This is especially important when carrying out regular roof maintenance, inspection or servicing work.

The D-shaped gasket installed around the perimeter of the hatch is compressed when the lid is closed and helps reduce air and moisture penetration through the hatch joint. Correct hatch installation and proper connection of the roof waterproofing to the hatch structure are important for achieving adequate sealing.

• 1.5mm aluminium construction – strong, lightweight and corrosion-resistant.
• Gas lifting struts make the lid easier to open and help keep it open.
• Rock wool filling improves the thermal insulation properties of the lid.
• D-shaped gasket helps ensure tight closing of the hatch.
• Handle with lock allows convenient operation and securing of the hatch.
• Reinforced hinges are designed for frequent and long-term use.
• Powder-coated surface provides additional external protection.

• Professional installation required: incorrect connection of the hatch to the roof waterproofing may create a risk of water or air leakage.
• Fixed opening size: before installation, it is necessary to ensure that the clear opening matches the project requirements.
• Roof construction: the installation solution must be adapted to the specific roof type, slope and waterproofing system.
• Gas struts are mechanical components: their condition should be checked periodically during operation.

Ventilation units are installed on the roof of an industrial building and require periodic servicing by maintenance personnel. Instead of temporary ladder access, an aluminium roof hatch is installed in the building's roof structure. After releasing the handle lock, the gas struts help lift the lid and keep it open, allowing the maintenance worker to access the roof more safely and return to the building.

The clear opening size of the hatch is 600x600mm.

The overall dimensions are 710x710x70mm.

The main hatch structure is made of 1.5mm thick aluminium.

Yes. Rock wool is used inside the lid for thermal insulation.

The lid is easier to open thanks to gas lifting struts that compensate for part of its weight.

The gas struts help stabilise the raised lid and reduce the risk of uncontrolled rapid closing.

Yes. A D-shaped sealing gasket is used to help ensure tight closure of the hatch.

Yes. The construction includes a handle with a locking mechanism.

The roof hatch must be installed according to the specific roof construction, waterproofing system and building design. During installation, proper fixing of the hatch base, water drainage and connection to the roof waterproofing must be ensured. Before use, check the operation of the handle, lock, hinges and gas struts. Periodically inspect the condition of the mechanical components and do not use the hatch if the lifting or securing mechanism is damaged.