
Rubber granule tiles - pavers | EPDM-coated | 500x500x80mm | HIC 2.1m
Code: 500x500x80EPrice 79.90 € VAT incl.( 66.03 € VAT excl. )Price is per 1 m² (4 pcs of 500×500 mm tiles). EPDM top layer colours: red, blue, orange, green, grey, brown, violet, yellow. Some colours may be priced differently – we confirm the price before the order.
-
How to choose? → rubber tile guide filter by fall height (HIC) and quantity calculator
Rubber granule tiles - pavers | EPDM-coated | 500x500x80mm | HIC 2.1m
A shock-absorbing 80 mm tile with a coloured EPDM top layer on an SBR rubber granule base. Designed for playgrounds and sports areas where the free fall height of the equipment does not exceed 2.1 m.
Key point:
The 80 mm thickness provides a critical fall height of HIC 2.1 m, while the EPDM top gives longer-lasting colour and a wider colour choice than standard SBR tiles. Choose it when both safety and long-term appearance matter.Thickness
80 mmHIC
2.1 mFormat
500×500 mmTop layer
EPDM, coloured throughHow it works
The tile has two layers: the bottom is an elastic SBR rubber granule base that absorbs impact energy; the top is EPDM granules coloured through and bonded with a polyurethane binder.
In a fall, the impact is distributed through the whole tile thickness, reducing the risk of head injury. The porous structure lets water through – no puddles form and the surface stays non-slip.
Why choose a 80 mm EPDM tile?
Safety comes from thickness (HIC 2.1 m), and the EPDM layer solves the most common SBR tile drawback – colour fading outdoors. A good choice for public playgrounds and visible areas.Technical specifications
Product type Rubber granule tile with EPDM top layer Code 500x500x80E Dimensions 500×500 mm Thickness 80 mm Critical fall height (HIC) 2.1 m Quantity per 1 m² 4 pcs Base SBR rubber granules, polyurethane binder Top layer EPDM granules, coloured through Colours red, blue, orange, green, grey, brown, violet, yellow Test method EN 1177 (HIC declared by the manufacturer) Use outdoors and indoors Price unit 1 m² Main functions
- Impact absorption – HIC 2.1 m for equipment up to that fall height
- EPDM colour – lasts longer outdoors, wide colour choice
- Water permeability – no puddles, dries quickly
- Non-slip surface – safe in wet weather
- Modular installation – no pouring equipment, a damaged tile is easy to replace
Where is it used?
- Public playgrounds
- School and kindergarten grounds
- Outdoor fitness areas
- Private playgrounds in yards and gardens
- Areas around swings, slides and climbing frames
- Coloured paths and play zone markings
Use by need
For playground installers.
One format for the whole impact area with declared HIC – easy to plan and hand over to the client.For municipalities and property managers.
The colour lasts longer, so the playground looks tidy for longer without replacing the surface.For homeowners.
A safe surface under children's equipment that you can lay yourself on a prepared base.Practical use
If a playground has equipment with a free fall height of up to 2.1 m, this tile covers its whole impact area – usually at least 1.5 m around the equipment. Calculate the quantity: area in m² × 4 pcs, plus a 5–10 % margin for cutting.Advantages
- Declared HIC 2.1 m
- Longer-lasting EPDM colour
- Choice of 8 colours
- Non-slip and water-permeable
- Frost and UV resistant
- Modular – easy to repair
Disadvantages / limitations
- More expensive than standard SBR tiles
- A rubber smell is noticeable during the first weeks
- A firm, level base is required
- Not suitable for areas with petroleum products and oils
Safety and installation notes
- Do not use for equipment with a free fall height above 2.1 m – choose a thicker tile
- The surface must cover the whole impact area without gaps or level differences
- Lay on concrete, asphalt or compacted crushed stone with a levelling layer
- Join the tiles with pins (sleeves) or polyurethane adhesive; frame free edges with curbs
- On public playgrounds the surface is inspected after installation according to EN 1176 / EN 1177
Quick selection guide
500×500 mm80 mmHIC 2.1 mEPDM top4 pcs/m²Suitable when you need:- a surface for equipment with a fall height of up to 2.1 m
- a coloured, long-lasting playground surface
- a modular surface without pouring equipment
Check before use:- the free fall height of the equipment
- the impact area and tile quantity
- the base type and drainage
- the preferred colour and its price
Important reminder: the tile does not replace the conformity and inspection of playground equipment – the playground operator is responsible for its conformity.FAQ
What is the price for?
For 1 m² – that is 4 pcs of 500×500 mm tiles.What fall height is it suitable for?
Up to 2.1 m free fall height (HIC according to manufacturer data).Is an EPDM tile safer than SBR?
No – safety depends on thickness; the EPDM advantage is longer-lasting colour.Do all colours cost the same?
Not always – for some colours we confirm the price before the order.Can it be laid on grass?
No – a firm base is required: concrete, asphalt or compacted crushed stone.How do I maintain it?
Sweep and rinse with water; do not use solvents or metal shovels.Rubber granule tiles - pavers | EPDM-coated | 500x500x80mm | HIC 2.1m
Rubber granule tile with a coloured EPDM layer, 500×500 mm, 80 mm thick, critical fall height HIC 2.1 m – a safe, non-slip and colourfast surface for playgrounds and sports areas.
Published: 2026-11-17 · Data checked against supplier data: 2026-11-17
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review







