
Sleep monitoring radar sensor | 60 GHz mmWave | breathing, heart rate, in-bed presence | WiFi 2.4 GHz | Tuya | 5 V | ST-60MG2-6HW
Code: ES-60MG2-6HWPrice 109.00 € VAT incl.( 90.08 € VAT excl. )Contactless 60 GHz radar above the bed: monitors in-bed presence, breathing and heart rate, sends phone alerts when a person does not return to bed at night. No cameras or wearables, Tuya / Smart Life.
-
Sleep monitoring radar sensor | 60 GHz mmWave | breathing, heart rate, in-bed presence | WiFi 2.4 GHz | Tuya | 5 V | ST-60MG2-6HW
A contactless 60 GHz millimetre-wave radar mounted above the head of the bed. It detects whether a person is in bed, tracks breathing and heart rate, turning over and leaving the bed, and delivers a sleep report in the Tuya / Smart Life app. No wristband and no under-mattress pad – the sensor works at a distance.
Key idea:
An elderly relative lives alone and you want to know whether they went back to bed, whether they have been up for too long, or whether the night was calm? The radar sees this without cameras or wearables. Unusual breathing or heart-rate readings and too much time out of bed are sent as a notification to your phone.Technology
60 GHz FMCW radarMonitors
in-bed presence, breathing, heart rate, sleepConnectivity
WiFi 2.4 GHz, Tuya / Smart LifePower supply
5 V DC, 1 AOperating principle
The sensor is wall-mounted above the head of the bed, 0.8–1.2 m above the mattress, tilted at 45° towards the bed. The beam sector is 40° horizontally and 40° vertically, covering a typical bed area (about 2 m wide and 2.2 m long).
The 60 GHz frequency-modulated continuous-wave (FMCW) radar registers the tiny chest movements caused by breathing and heartbeat. This lets it recognise a completely motionless person – something an ordinary PIR motion sensor cannot do. Radar waves pass through blankets, fabric, plastic and glass and are not affected by light, heat or air currents.
Data is sent via WiFi to the Tuya / Smart Life app: real-time status (in bed / out of bed), breathing and heart rate, history, and after the night a sleep report with sleep duration, phases, number of times out of bed and turns.
Why choose the ST-60MG2-6HW?
It monitors only the bed zone and reports deviations: a long time out of bed, restless tossing, unusual breathing or heart-rate readings. Relatives or caregivers get an alert on the phone, while the monitored person does not need to wear or charge anything.Technical specifications
Product type Sleep and in-bed presence monitoring radar sensor Model ST-60MG2-6HW (MG2-6HW) Radar type / frequency FMCW millimetre-wave radar, 60 GHz Monitored parameters In-bed presence / leaving the bed, breathing rate, heart rate, turning over, sleep state and report Detection zone ~2 m wide × 2.2 m long (bed area) Detection distances Human presence – up to 2 m; in-bed presence – up to 1 m; breathing rate – 0.5–1.5 m (tolerance ±0.5 m) Detection angle 40° horizontal, 40° vertical Connectivity WiFi 2.4 GHz App Tuya Smart / Smart Life Power supply 5 V DC, 1 A Mounting On the wall above the head of the bed, 0.8–1.2 m above the mattress, 45° tilt; screws or 3M adhesive tape Operating temperature −10…+60 °C Operating humidity 20–85 % RH (non-condensing) Dimensions 59 × 59 × 34 mm Package contents Radar, mounting base, 2 screws with wall plugs, 3M adhesive tape, manual Main functions
- In-bed presence monitoring – you see whether the person went to bed, got up and how long they have been away.
- Alert for a long time out of bed – if a person who got up at night does not return within the set time, the phone receives a warning.
- Breathing and heart rate – indicative real-time and overnight data, with alerts for unusual values.
- Restless sleep detection – tossing and turning is registered and a notification is sent.
- Sleep report – sleep duration, light and deep sleep, awake time, number of times out of bed.
- No cameras and no wearables – privacy is kept, nothing to charge or put on.
- Tuya scenes – when the person gets out of bed, night lighting or another Tuya device can switch on automatically.
Where is it used?
- Flats and houses of seniors living alone
- Care homes and nursing facilities – to ease night-time supervision
- Assisted living and social-service projects
- Homes caring for a bedridden or recovering family member
- Guest houses or farmsteads where an elderly person lives in a separate building
- Smart homes – for sleep-quality tracking and night-lighting scenes
Use by need
Seniors' relatives.
Even living in another city, you see on your phone whether your parents had a calm night and got up in the morning.Care home management.
Night staff get an alert only when a resident has not returned to bed for a long time and do not have to keep walking from room to room.Smart home installers.
A Tuya ecosystem device that can be linked with lighting, alarms and other sensors in one app.Practical use
If your 82-year-old mother lives alone and you live in another city, you install the radar above her bed and set the app to send an alert if she is out of bed at night for more than 20 minutes. Then you learn that something is wrong without waiting until morning and without a camera in the bedroom.Advantages
- Contactless – nothing to wear or charge
- Recognises even a completely motionless person
- No camera – privacy is protected
- Not affected by light, heat or air currents
- Real-time phone notifications
- Sleep report and history in the app
- Small and easy to install
Disadvantages / limitations
- Not a medical device – heart rate and breathing are indicative
- Monitors one bed and one person; in a double bed data may mix
- Needs a permanent 5 V supply and stable 2.4 GHz WiFi (5 GHz not supported)
- Does not detect falls in the room – a separate fall radar is needed for that
- Some app menus may be available in English only
Safety and installation notes
- Mount above the head of the bed, 0.8–1.2 m above the mattress, at 45° towards the bed – otherwise breathing detection accuracy drops.
- Do not point the radar at a fan, curtains or other moving objects – this can cause false readings.
- Use a quality CE-marked 5 V / 1 A power supply; secure the power cable so nobody trips over it.
- Before setup, make sure the WiFi network is 2.4 GHz and the signal reaches the bedroom.
- Do not install in damp rooms or outdoors – the sensor is intended for dry indoor rooms.
Quick selection guide
60 GHz radar1 bed, 1 personWiFi 2.4 GHz / Tuya5 V DC, 1 ASuitable when you need:- to know remotely whether an elderly person is in bed and the night is calm;
- an alert when the person does not return to bed at night for a long time;
- monitoring without cameras and wearables.
Check before use:- whether the bedroom has 2.4 GHz WiFi and a socket for the 5 V power supply;
- whether the sensor can be fixed above the head of the bed at the required height;
- whether the bed is single or only one person is monitored.
Important reminder: the radar does not replace medical care, devices prescribed by a doctor or an emergency call button – it is an auxiliary monitoring tool.FAQ
Does the radar see through a blanket?
Yes, 60 GHz radar waves pass through blankets and bedding.Is it a medical device?
No, heart rate and breathing rate are indicative data for wellbeing and sleep tracking, not for diagnosis.Does it work with 5 GHz WiFi?
No, the sensor connects only to a 2.4 GHz WiFi network.Can several people receive notifications?
Yes, in the Tuya / Smart Life app the device can be shared with other family members.Does it detect a fall in the room?
No, this model monitors the bed zone; a separate fall detection radar is needed to detect falls.Can it be connected to Home Assistant?
The sensor works through the Tuya cloud, so it can be added via the Tuya integration, but not all parameters may be visible.Sleep monitoring radar sensor 60 GHz | WiFi Tuya | ST-60MG2-6HW
Contactless 60 GHz mmWave radar for monitoring the sleep of seniors and people in care: in-bed presence, breathing and heart rate, out-of-bed alerts and a sleep report in the Tuya / Smart Life app – without cameras or wearables.
Published: 2026-11-18 · Data verified against the manufacturer's datasheet: 2026-11-18
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review

