
Rubber granule tiles - pavers | sloped edge | black | 500x500x50mm | HIC 1.8m
Code: 500x500x50NJPrice 13.20 € VAT incl.( 10.91 € VAT excl. )Price is per 1 pc. Sloped rubber granule edge tile, 500×500×50 mm, HIC 1.8 m, colour black.
-
How to choose? → rubber tile guide filter by fall height (HIC) and quantity calculator
Rubber granule tiles - pavers | sloped edge | black | 500x500x50mm | HIC 1.8m
A sloped rubber granule edge tile, 500×500 mm, 50 mm thick. It finishes a 50 mm tile surface and removes the step between the surface and the surrounding ground.
Key point:
A surface edge without a slope is where people trip most often. The sloped tile is chosen in the same thickness as the main surface (50 mm) for a smooth transition.Thickness
50 mmHIC
1.8 mFormat
500×500 mmColour
blackHow it works
The tile is pressed from SBR rubber granules with a polyurethane binder; one edge is formed with a slope.
It is laid at the edge of the surface – the thick side joins the 50 mm tiles and the slope descends smoothly to base level.
Why use a sloped tile?
No curb or raised base is needed: the surface gets a safe edge that prams and wheelchairs can roll over easily.Technical specifications
Product type Sloped rubber granule tile (edge element) Code 500x500x50NJ Dimensions 500×500 mm Thickness 50 mm Critical fall height (HIC) 1.8 m Material SBR rubber granules, polyurethane binder Colour black Combine with 50 mm rubber granule tiles Price unit 1 pc Main functions
- Smooth transition – no step at the surface edge
- Accessibility – easy for prams and wheelchairs
- Impact absorption – HIC 1.8 m
- Non-slip surface – safe in wet weather
- Same material – a continuous surface with the main tiles
Where is it used?
- Playground surface edges
- Entrances to playgrounds and sports areas
- Transitions from tiles to paving or asphalt
- Terrace and path edges
- Gym floor edges
Use by need
For playground installers.
A safe surface finish without extra curbs.For public space managers.
An accessible entrance for prams and wheelchairs.For homeowners.
A neat surface edge in the yard or on the terrace.Practical use
If a playground is covered with 50 mm tiles and one edge meets a path, lay sloped tiles along that edge – 2 pcs per metre of edge.Advantages
- Removes the step at the edge
- Easy for prams and wheelchairs
- Same thickness as the surface
- Non-slip
- Frost resistant
Disadvantages / limitations
- Only suits a surface of the same thickness (50 mm)
- Outdoors the colour gradually fades
- A firm base is required
- Not suitable for areas with petroleum products
Safety and installation notes
- Combine with tiles of the same thickness
- The sloped tile does not replace the impact area – the whole area must be covered with main tiles
- Join to the surface with pins (sleeves) or adhesive
- The base must be firm and level
Quick selection guide
500×500 mm50 mmHIC 1.8 mblack2 pcs/m of edgeSuitable when you need:- to finish a 50 mm tile surface without a step
- an accessible playground entrance
- a neat surface edge
Check before use:- the main surface thickness (50 mm)
- the edge length (2 pcs/m)
- colour match with the surface
Important reminder: the sloped tile is an edge element – the impact area around the equipment is covered by the main tiles.FAQ
What is the price for?
For 1 pc of 500×500 mm tile.How many per metre of edge?
2 pcs.Does it suit a different thickness?
No – choose the same thickness as the surface.Can it replace a curb?
Yes, when the edge should be finished without a step.Is it slippery when wet?
No.How do I maintain it?
Sweep and rinse with water.Rubber granule tiles - pavers | sloped edge | black | 500x500x50mm | HIC 1.8m
Sloped rubber granule tile, 500×500×50 mm, colour black, HIC 1.8 m – a safe and accessible edge for a 50 mm tile surface.
Published: 2026-11-17 · Data checked against supplier data: 2026-11-17
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review







