Smart 5-channel timer relay | ZigBee | 5 × 16 A isolated contacts | 100–240 V AC | DIN | TUYA | OURTOP ATMS16M05AZ
Code: ATMS16M05AZPrice 89.00 € VAT incl.( 73.55 € VAT excl. )Smart DIN-rail ZigBee timer relay with 5 isolated 16 A / 250 V AC channels, Tuya / Smart Life control, local and external push buttons.
-
Smart 5-channel timer relay | ZigBee | 5 × 16 A isolated contacts | 100–240 V AC | DIN | TUYA | OURTOP ATMS16M05AZ
OURTOP ATMS16M05AZ is a DIN-rail ZigBee controller with five individually controlled relays in one housing. Each channel has its own isolated contact pair, so separate circuits can switch lighting, ventilation, pumps or contactor coils. Control is via the Tuya / Smart Life app, local buttons on the housing and wired external push buttons.
Key idea:
Instead of five separate smart relays, the panel gets one device with one supply and one ZigBee node. Isolated contacts allow the same module to switch both 230 V loads and low-voltage control circuits. Useful where several circuits need schedules and remote control and panel space is limited.Channels
5 independent relaysContacts
16 A / 250 V AC (cos φ = 1)Connectivity
ZigBee, Tuya / Smart LifeSupply
100–240 V AC, 50/60 HzOperating principle
The module mounts on a 35 mm DIN rail. 100–240 V AC supply is connected to terminals N and L, and the phase (or control signal) of each controlled circuit passes through a separate channel contact pair (3–4, 7–8, 9–10, 1–2, 5–6).
The device pairs with a Tuya ZigBee gateway and appears in the app as five separate switches. Each channel can have its own schedule, timer, scene or voice control via Alexa / Google Assistant. Relays can also be switched with buttons S1–S5 on the housing, with status shown by indicators R1–R5.
Terminals C1 and C2 are for external NO-type momentary push buttons, so channels can be controlled from a wall button even when no phone is at hand.
Why choose ATMS16M05AZ?
One ZigBee node controls five circuits with separate isolated contacts – fewer devices on the gateway, less panel space and simpler wiring than five single-channel relays.Technical specifications
Product type Smart multi-channel timer relay (ZigBee), modular Manufacturer OURTOP (Wenzhou Ourtop Electrical Co., Ltd.) Model ATMS16M05AZ Supply voltage 100–240 V AC, 50/60 Hz Number of channels 5, each controlled separately Output type Relay contacts, isolated per channel (terminal pairs 3–4, 7–8, 9–10, 1–2, 5–6) Contact rating 16 A / 250 V AC, resistive load (cos φ = 1), per channel Mechanical life 100 000 operations Wireless ZigBee, 2.4 GHz (Tuya ZigBee gateway required) App Tuya Smart / Smart Life (iOS, Android) Voice control Amazon Alexa, Google Assistant (via Tuya) Local control Buttons S1–S5 and status indicators R1–R5 on the housing External control Terminals C1/C2 for NO-type momentary push buttons Mounting 35 mm DIN rail Housing material ABS / PC Marking CE Gross weight 0.17 kg Main functions
- 5 independent channels – each circuit has its own name, schedule and scenes in the app.
- Isolated contacts – different circuits can switch different voltages, e.g. 230 V lighting and a 24 V control signal.
- Timers and schedules – switching by time, weekday or countdown without a separate time relay.
- Local buttons S1–S5 – manual control directly in the panel during commissioning and service.
- External buttons via C1/C2 – wired control from the room, not only from a phone.
- ZigBee network – low load on Wi-Fi; works via a Tuya ZigBee gateway together with other sensors and scenes.
Where is it used?
- Home distribution boards – outdoor, terrace, facade and garden lighting groups.
- Offices and shops – schedules for display, signage and work-area lighting.
- Hotels and guest houses – common-area lighting and ventilation by time.
- Heating and ventilation – fans, circulation pumps, damper actuators.
- Greenhouses and farms – irrigation valves, supplementary lighting, ventilation.
- Contactor coil control – for higher-power or three-phase loads.
- Apartment buildings – stairwell, basement and yard lighting on a schedule.
Use by need
Homeowner.
Outdoor lighting, circulation pump and ventilation controlled from one app with separate schedules.Electrical installer.
One module instead of five – less pairing, one supply and a tidier panel.Commercial premises manager.
Display, signage and common-area groups switched by opening hours without separate time relays.Practical application
If a house needs control of facade lighting, terrace luminaires, a garden irrigation valve, a bathroom fan and an underfloor heating pump, all five circuits can be wired through one ATMS16M05AZ. Lighting switches on by schedule, irrigation runs in the morning for a set time, and the pump channel drives a contactor coil. When needed, each circuit can be switched with a button in the panel or an external wall button.Pros
- 5 channels in one DIN module
- Isolated contacts on every channel
- 16 A / 250 V AC contacts for resistive load
- Local buttons and status indicators
- External push buttons can be connected
- Tuya / Smart Life ecosystem, Alexa and Google Assistant
Cons / limitations
- Works only with a Tuya ZigBee gateway (sold separately)
- 16 A applies to resistive load – motors, LED drivers and other inductive or capacitive loads need derating or a contactor
- No energy metering – for kWh monitoring choose a relay with a meter
- No overload or short-circuit protection – circuits must be protected by circuit breakers
Safety and installation notes
- Installation must be done by a qualified electrician with the supply fully disconnected.
- Protect every controlled circuit with a circuit breaker matching cable size and load.
- Do not exceed 16 A per channel; connect higher-power, motor or three-phase loads via a contactor.
- Connect only NO-type momentary push buttons to C1/C2, not latching switches.
- A metal enclosure can weaken the ZigBee signal – check the link before closing the panel.
Quick selection guide
5 channels16 A / 250 V ACZigBee | Tuya100–240 V ACDIN 35 mmSuitable when you need:- scheduled control of several lighting or equipment groups;
- circuits of different voltages in one module;
- remote control together with local buttons.
Check before use:- that you have a Tuya ZigBee gateway, e.g. NOUS-E1 or WOOX R7070;
- the load type and current on each channel;
- that there is room in the panel and the ZigBee signal reaches the gateway.
Important reminder: the timer relay only switches circuits – it does not replace circuit breakers, RCDs or motor protection.FAQ
Does it work without a ZigBee gateway?
App control and schedules require a Tuya ZigBee gateway; without it the relays can only be switched with the buttons.Can channels switch different voltages?
Yes, each channel has a separate isolated contact pair, so one circuit can carry 230 V and another a low-voltage control signal.Can an electric motor be connected directly?
We recommend connecting motors and other inductive loads via a contactor and using the relay channel to drive its coil.Can a wall button be used?
Yes, NO-type momentary push buttons are connected to terminals C1/C2.Does it measure energy consumption?
No, this model does not meter energy – it only switches circuits.Which apps control it?
Tuya Smart or Smart Life, plus voice control via Amazon Alexa and Google Assistant.Smart 5-channel timer relay OURTOP ATMS16M05AZ
DIN-rail ZigBee timer relay with five isolated 16 A / 250 V AC channels, Tuya / Smart Life control, local and external buttons – for scheduled control of lighting, ventilation and equipment groups.
Published: 2026-11-18 · Data checked against the manufacturer's specification and product marking: 2026-11-18
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review












