Products catalog

  • Smart DIN switch | ZigBee | 1P | up to 16A continuous | 90–300V AC | TUYA | remote control | ES-TXCB2-TW-Z

    Code: ES-TXCB2-TW-Z

    The smart circuit breaker is an advanced device designed to remotely control electrical appliances and circuits. This device allows users to efficiently manage energy consumption through popular applications such as TUYA, Smart Life, and Home Assistant. The breaker supports wireless communication with the ZigBee 3.0 network, enabling users to take advantage of numerous automation features. 

  • Smart DIN switch | ZigBee | 1P | up to 16A continuous | 90–300V AC | TUYA | remote control | ES-TXCB2-TW-Z

    Tuya ZigBee smart DIN rail switch designed for single-phase circuits with remote on/off switching. Controlled via the Tuya Smart / Smart Life app through a ZigBee gateway.

    Key idea:
    This is a remotely controlled circuit switch with smart functions, not a classic protective circuit breaker. According to the supplier's data, the continuous load is up to 16 A, so a standard circuit breaker must remain in the panel to protect the circuit cable.
    Connectivity
    ZigBee (Tuya)
    Continuous current
    up to 16 A
    Power supply
    90–300 V AC
    Width
    1 module (18 mm)

    How it works

    The device is mounted in the panel on a 35 mm DIN rail, in series with the circuit downstream of a standard circuit breaker. It is paired with a ZigBee gateway and controlled via the app.

    A command from the app is sent via ZigBee to the device, which switches the circuit on or off. Timers and scenes allow control to be automated without human intervention.

    Why choose the TXCB2?
    You can switch a circuit on, off or schedule it from your phone, while the device takes up only one module in the panel.

    Technical specifications

    Product typeSmart DIN switch (ZigBee)
    Manufacturer codeES-TXCB2-TW-Z
    ConnectivityZigBee (Tuya / Smart Life, gateway required)
    Supply voltage90–300 V AC, 50/60 Hz
    Switching currentshort-term up to 63 A, continuous up to 16 A (according to supplier data)
    Own power consumption< 0.3 W
    Dimensions50 × 82 × 18 mm
    Mounting35 mm DIN rail, 1 module
    Operating temperature−20…+60 °C

    Key functions

    • Remote control – switch the circuit on and off from your phone.
    • Timers and scenes – the circuit operates on a schedule or based on the status of other devices.
    • Status memory – the last state is restored after a power outage.

    Where is it used?

    • Electric heating and water heaters (up to 16 A)
    • Lighting circuits
    • Outdoor lighting and gate automation
    • Ventilation and humidification
    • Circuits in rental properties
    • Smart home systems with ZigBee

    Use by need

    For the smart home enthusiast.
    The circuit is added to Tuya / Home Assistant scenes via ZigBee.
    For the homeowner.
    Control heating or lighting remotely and on a schedule.
    For the electrician.
    One module in the panel – easy to add to an existing panel.

    Practical use

    If you want to switch on a water heater only during cheaper tariff hours, the TXCB2 installed downstream of a standard 16 A circuit breaker will switch it on according to a schedule, and the app will show its status.

    Pros

    • Only 1 module in the panel
    • ZigBee connectivity – less load on the WiFi network
    • Timers and scenes in the Tuya app
    • Wide supply voltage range 90–300 V AC

    Cons / limitations

    • The name states 63 A, but according to supplier data the continuous load is up to 16 A
    • No declared breaking capacity (kA) – a standard circuit breaker is required for cable protection
    • A ZigBee gateway is required, and internet access for remote control
    • Indoor use only

    Safety and installation notes

    • Installation must be carried out only by a qualified electrician with the power disconnected.
    • Install a circuit breaker upstream of the device, rated no higher than 16 A and matched to the cable.
    • Do not exceed the 16 A continuous load.
    • Damp-room and socket-outlet circuits require a 30 mA residual current device.

    Quick selection guide

    1P | ZigBee
    up to 16 A
    90–300 V AC
    DIN | 1 module
    Suitable when you need:
    • remote control of a single-phase circuit;
    • scheduled circuit operation;
    • simple remote switching without metering.
    Check before use:
    • that the load does not exceed 16 A;
    • that you have a ZigBee gateway;
    • that a suitable circuit breaker is installed upstream of the device.
    Important reminder: this device does not replace a circuit breaker for cable protection or a residual current device (RCD).

    FAQ

    Is a gateway required?
    Yes – the ZigBee device requires a Tuya ZigBee gateway.
    What load can be connected?
    According to supplier data, the continuous load is up to 16 A.
    Does it replace a circuit breaker?
    No – a standard circuit breaker must be installed upstream of it in the panel.
    Does it work without internet?
    Manual control and local scenes work; remote control requires internet.
    Which app should I use?
    Tuya Smart or Smart Life.
    Is it suitable for outdoor use?
    No – only in an indoor panel.

    Smart DIN switch | ZigBee | 1P | up to 16A continuous | 90–300V AC | TUYA | remote control | ES-TXCB2-TW-Z

    Tuya ZigBee smart DIN switch ES-TXCB2-TW-Z – remote control of a single-phase circuit, one module in the panel, continuous load up to 16 A.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

  • privacy policy

    Information