Products catalog

  • Smart curtain and roller shutter module | ZigBee | 3 A | 100–240 V AC | flush-mounted | TUYA | OURTOP ATMSCTZ

    Code: ATMSCTZ

    ZigBee module for controlling the motor of electric curtains, roller shutters or blinds: installed in the box behind the switch, outputs L1/L2 for up and down, S1/S2 for existing push buttons.

  • Smart curtain and roller shutter module | ZigBee | 3 A | 100–240 V AC | flush-mounted | TUYA | OURTOP ATMSCTZ

    ZigBee module for controlling the motor of electric curtains, roller shutters or blinds: installed in the box behind the switch, outputs L1/L2 for up and down, S1/S2 for existing push buttons.

    Key point:
    Electric shutters or curtains become phone- and time-controlled while the existing buttons stay. The module goes in the box behind the button, so the shutter motor and wiring do not need replacing.
    Maximum load
    3 A
    Directions
    L1 / L2
    Connectivity
    ZigBee
    Mounting
    in-wall

    Operating principle

    The module is installed in a wall box: L and N for supply, L1 and L2 for the motor up and down directions, S1 and S2 for the existing buttons.

    Via a Tuya ZigBee gateway, the shutters are controlled in the Tuya Smart / Smart Life app, by voice or by schedule, while the wall buttons work as before.

    The result: shutters rise in the morning and close in the evening by themselves, even when nobody is home.

    Why choose ATMSCTZ?
    Existing shutters get schedules and remote control without changing the motor or running new wires.

    Technical specifications

    Product typeFlush-mounted curtain / shutter module (ZigBee)
    Manufacturer / modelOURTOP ATMSCTZ
    Supply voltage100–240 V AC, 50/60 Hz
    Maximum load3 A
    TerminalsL2, L, L1, N, S1, S2
    ConnectivityZigBee (Tuya)
    App / ecosystemTuya Smart / Smart Life, Alexa, Google Assistant
    MountingWall box behind the switch
    MarkingCE

    Key functions

    • Up / down / stop – control in the app.
    • Existing buttons (S1 / S2) – wall control remains.
    • Schedules – switching by time.
    • Scenes – work together with other Tuya ZigBee devices.
    • Voice control – Alexa and Google Assistant.

    Where is it used?

    • Electric shutters in houses and apartments
    • Motorised curtains
    • Blinds and awnings with a single-phase motor
    • Offices and meeting rooms
    • Holiday homes – shutters on schedule while the owner is away
    • Upgrading existing shutters

    Use by need

    For the homeowner.
    Shutters are controlled from the phone and to suit the day routine.
    For the electrician.
    The module goes into the existing button box – shutter motors and cables stay.
    For the holiday home owner.
    Shutters rise and fall on schedule, so the house does not look empty.

    Practical example

    If the living room shutters are raised and lowered by hand every day, ATMSCTZ behind the existing button lets you set a morning raise and evening close, while the buttons work as before.

    Advantages

    • Existing switches and their design stay
    • Fits in a wall box
    • Shutter schedules in the app
    • ZigBee network does not load Wi-Fi
    • Alexa and Google Assistant support

    Limitations

    • Requires a Tuya ZigBee gateway (e.g. OURTOP ATMSGZ01A)
    • For motors up to 3 A
    • A neutral wire (N) is required in the box
    • Remote access needs internet and the Tuya cloud

    Safety and installation notes

    • Install only with the power disconnected; work in the panel must be done by a qualified electrician.
    • Use a deep wall box so the module and wires fit without being squeezed.
    • Connect the existing switch or button to the input only according to the manufacturer diagram.
    • Check the motor current (up to 3 A) and the L1 / L2 direction wiring before the first start.
    • Protect the supply and load circuits with a circuit breaker selected for the cable and load.

    Quick selection guide

    3 A
    L1 / L2
    ZigBee
    in-wall
    Suitable when you need:
    • Control electric shutters by phone
    • Shutter schedules
    • Keep the existing buttons
    Check before use:
    • Motor current does not exceed 3 A
    • That you have a Tuya ZigBee gateway and its signal reaches the room
    • That the wall box is deep enough for the module
    Important: ATMSCTZ is for single-phase two-direction shutter and curtain motors – it is not for other loads and does not replace a circuit breaker.

    FAQ

    Is a ZigBee gateway required?
    Yes, the module connects via a Tuya ZigBee gateway.
    Which motor can be connected?
    A single-phase two-direction shutter or curtain motor up to 3 A.
    Will the existing buttons work?
    Yes, they connect to terminals S1 and S2.
    Can a schedule be set?
    Yes, shutter schedules are set in the Tuya app.
    Is a neutral wire needed?
    Yes, the module has an N terminal and is wired with a neutral.
    Does it support voice control?
    Yes, Alexa and Google Assistant work via Tuya / Smart Life.

    Smart curtain and roller shutter module | ZigBee | 3 A | 100–240 V AC | flush-mounted | TUYA | OURTOP ATMSCTZ

    ATMSCTZ is an in-wall ZigBee shutter and curtain module for single-phase motors up to 3 A, with S1/S2 inputs for the existing buttons. It gives shutters schedules, phone and voice control.

    Published: 2026-11-19 · Data verified against the manufacturer specification: 2026-11-19

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • privacy policy

    Information