Products catalog

  • Smart dimmer module | ZigBee 3.0 | 1 channel | up to 150 W | 220–240 V AC | no neutral | flush-mounted | TUYA | OURTOP ATMSDMZ01

    Code: ATMSDMZ01

    ZigBee 3.0 dimmer module for the box behind the switch, suitable also where there is no neutral wire.

  • Smart dimmer module | ZigBee 3.0 | 1 channel | up to 150 W | 220–240 V AC | no neutral | flush-mounted | TUYA | OURTOP ATMSDMZ01

    ZigBee 3.0 dimmer module for the box behind the switch, suitable also where there is no neutral wire. Light can be dimmed from the Tuya app, by voice or with the existing push button (terminals COM / S).

    Key point:
    Dimming even where there is no neutral in the box – a common situation in older buildings. The module goes behind the existing button, and light is dimmed by phone, voice or button.
    Maximum load
    150 W
    Neutral wire
    not required
    Connectivity
    ZigBee 3.0
    Mounting
    in-wall

    Operating principle

    The module is installed in the wall box behind the switch. Wiring uses terminals L, L1, N, COM and S according to the manufacturer diagram; where there is no neutral, the no-neutral diagram is used.

    Via a Tuya ZigBee 3.0 gateway, brightness is changed in the Tuya Smart / Smart Life app or by voice, and the existing button (COM / S) allows manual dimming too.

    The result: dimmable, smart lighting without running new wires.

    Why choose ATMSDMZ01?
    In older installations without a neutral, this is one of the few ways to get smart dimming without breaking walls.

    Technical specifications

    Product typeFlush-mounted dimmer module (ZigBee 3.0)
    Manufacturer / modelOURTOP ATMSDMZ01
    Supply voltage220–240 V AC, 50/60 Hz
    Maximum load150 W
    Neutral wireNot required
    TerminalsL, L1, L1, N, COM, S
    ConnectivityZigBee 3.0, 2,4 GHz (Tuya)
    App / ecosystemTuya Smart / Smart Life, Alexa, Google Assistant
    MountingWall box behind the switch
    MarkingCE, RoHS

    Key functions

    • No-neutral dimming – suits older wiring.
    • Brightness in the app – precise dimming by phone.
    • Existing button (COM / S) – manual control stays.
    • Schedules – switching by time.
    • Scenes – work together with other Tuya ZigBee devices.
    • Voice control – Alexa and Google Assistant.

    Where is it used?

    • Older houses and flats without neutral in boxes
    • Bedrooms and living rooms
    • Corridors with night lighting
    • Renovations without breaking walls
    • Mood lighting in cafés and hospitality rooms
    • Smart scene systems with Tuya ZigBee

    Use by need

    For the homeowner.
    Brightness is changed by phone, voice or the usual button.
    For the electrician.
    Solves smart dimming where there is no neutral in the box.
    For home renovators.
    Smart lighting without new cables or plastering work.

    Practical example

    If the bedroom switch box in an older flat has only the phase and the lamp wire, ATMSDMZ01 in its no-neutral wiring adds dimmable lighting, and in the evening the light can be lowered by phone or voice.

    Advantages

    • Works without a neutral too
    • Existing switches and their design stay
    • ZigBee 3.0 connectivity
    • Fits in a wall box
    • Alexa and Google Assistant support

    Limitations

    • Requires a Tuya ZigBee gateway (e.g. OURTOP ATMSGZ01A)
    • Load up to 150 W
    • Dimmable luminaires only
    • Remote access needs internet and the Tuya cloud

    Safety and installation notes

    • Install only with the power disconnected; work in the panel must be done by a qualified electrician.
    • Use a deep wall box so the module and wires fit without being squeezed.
    • Connect the existing switch or button to the input only according to the manufacturer diagram.
    • Connect dimmable luminaires only and do not exceed 150 W.
    • Protect the supply and load circuits with a circuit breaker selected for the cable and load.

    Quick selection guide

    150 W
    no neutral
    ZigBee 3.0
    in-wall
    Suitable when you need:
    • Dim lights where there is no neutral
    • Control lighting by phone and voice
    • Keep the existing button
    Check before use:
    • That luminaires are marked dimmable and power does not exceed 150 W
    • That you have a Tuya ZigBee gateway and its signal reaches the room
    • That the wall box is deep enough for the module
    Important: ATMSDMZ01 is for dimmable luminaires up to 150 W only – not for motors or sockets, and it does not replace a circuit breaker.

    FAQ

    Is a ZigBee gateway required?
    Yes, the module connects via a Tuya ZigBee gateway.
    Does it work without a neutral?
    Yes, a neutral is not required; wire it according to the manufacturer diagram.
    What load can be connected?
    Up to 150 W of dimmable luminaires.
    Can it be dimmed with a button?
    Yes, the existing button connects to terminals COM and S.
    Which luminaires are suitable?
    Only those marked dimmable by their manufacturer.
    Does it support voice control?
    Yes, Alexa and Google Assistant work via Tuya / Smart Life.

    Smart dimmer module | ZigBee 3.0 | 1 channel | up to 150 W | 220–240 V AC | no neutral | flush-mounted | TUYA | OURTOP ATMSDMZ01

    ATMSDMZ01 is an in-wall ZigBee 3.0 dimmer module up to 150 W that also works without a neutral, with an input for the existing button. Suits older homes, renovations and smart scenes.

    Published: 2026-11-19 · Data verified against the manufacturer specification: 2026-11-19

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • privacy policy

    Information