Products catalog

  • Industrial ultrasonic air humidifier | 9 kg/h | 600 W | 4,1–6 L tank | 230V600W

    Code: 230V600W

    Industrial ultrasonic air humidifier, output 9 kg/h, power 600 W, 4,1–6 L water tank.

  • Industrial ultrasonic air humidifier | 9 kg/h | 600 W | 4,1–6 L tank | 230V600W

    Industrial ultrasonic air humidifier with an output of 9 kg/h, designed for greenhouses, mushroom farms, warehouses, print shops and production halls. Ultrasound turns water into a fine mist that evaporates quickly in the air.

    Key point:
    Industrial output allows one unit to maintain humidity in a larger room. Correct humidity reduces material drying and static electricity and improves growing conditions for plants and mushrooms.
    Output
    9 kg/h
    Power
    600 W
    Water
    4,1–6 L water tank
    Control
    manual

    Operating principle

    An ultrasonic transducer vibrates the water at high frequency and breaks it into fine droplets, which the airflow carries into the room.

    The unit runs in the set mode – a separate hygrostat or humidity sensor is recommended for humidity control.

    Water supply: 4,1–6 L water tank.

    Why choose 230V600W?
    A specific output of 9 kg/h at 600 W: it is easy to calculate how many units a site needs.

    Technical specifications

    Product type Industrial ultrasonic air humidifier
    Code 230V600W
    Humidification output 9 kg/h
    Power 600 W
    Supply voltage 230 V AC
    Water supply 4,1–6 L water tank
    Control manual
    Noise level 36–45 dB
    Additional castors, metal housing, emergency STOP button, integrated fan
    Dimensions 570 × 300 × 360 mm

    Main functions

    • Ultrasonic mist – fine droplets evaporate quickly.
    • Output 9 kg/h – calculate the exact need from the room volume.
    • Simple control – can be combined with an external hygrostat.
    • Castors – additional convenience or safety feature.
    • Metal housing – additional convenience or safety feature.
    • Emergency STOP button – additional convenience or safety feature.

    Where is it used?

    • Greenhouses and nurseries
    • Mushroom growing rooms
    • Warehouses (wood, paper, textiles)
    • Print shops and packaging halls
    • Production halls where static electricity must be reduced
    • Woodworking workshops

    Use by need

    For greenhouses or mushroom farms.
    Stable humidity improves growing conditions for plants and mycelium.
    For warehouse or production managers.
    Less material drying and fewer static discharges.
    For print shops or furniture production.
    Paper and wood deform less.

    Practical use

    If the relative humidity in a 100 m² greenhouse or warehouse drops to 20–30 % during the heating season, a 9 kg/h humidifier combined with a hygrostat helps bring it back to the required level.

    Pros

    • Output 9 kg/h
    • Fine, quickly evaporating mist
    • Simple control
    • Castors
    • Metal housing
    • Ultrasound does not heat water – lower consumption than steam humidification

    Cons / limitations

    • Softened or demineralised water is required – otherwise white mineral dust settles
    • No automatic humidity control – a hygrostat is needed
    • The tank must be refilled periodically
    • Ingress protection (IP) not specified – for indoor use

    Safety and installation notes

    • Connect to an earthed socket matching the 230 V AC supply.
    • Do not direct mist or humid airflow at electrical equipment, panels or luminaires.
    • Disconnect from the mains before cleaning or refilling.
    • Clean the water tank regularly to prevent bacterial growth.
    • Do not keep relative humidity above 60–65 % for long periods – condensation and mould may form.

    Quick selection guide

    9 kg/h
    600 W
    4,1–6 L water tank
    manual
    Suitable when you need to:
    • increase relative humidity in a room;
    • maintain stable growing or storage conditions;
    • use a simple, reliable unit.
    Check before use:
    • room volume and air change rate;
    • water hardness;
    • supply voltage (230 V AC).
    Important reminder: a humidifier does not replace ventilation or reduce CO₂, and excessive humidity promotes condensation and mould.

    FAQ

    What room size is it suitable for?
    Calculate the need: volume × air change × 1.2 × Δx ÷ 1000 = kg/h.
    Can tap water be used?
    Yes, but hard water leaves white mineral dust – softened water is recommended.
    Does it maintain humidity automatically?
    No, a hygrostat is needed to maintain humidity.
    How is water supplied?
    4,1–6 L water tank.
    What are the power and supply?
    600 W, 230 V AC.
    Can it be used outdoors?
    No, the unit is intended for indoor use.

    Industrial ultrasonic air humidifier | 9 kg/h | 600 W | 4,1–6 L tank | 230V600W

    Industrial ultrasonic air humidifier 9 kg/h, 600 W, 4,1–6 L water tank – for greenhouses, mushroom farms, warehouses, print shops and production halls.

    Published: 2026-11-12 · Data based on supplier specification: 2026-11-12

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Subscribtion to new arrivals

    privacy policy

    Information