Smart padlock | NFC app unlocking | Φ55x96mm | IP65

Smart NFC Padlock without Battery | IP65 | NFC APP | retractable rotary knob | zinc alloy

Passive smart NFC padlock without an internal battery, designed for locking warehouses, self-storage facilities, outdoor gates, fences and other suitable objects. Unlocking is performed using an NFC-enabled smartphone and a retractable rotary knob. Through the NFC connection, the phone supplies the lock with both authorization and the energy required for operation.

There is no battery inside the lock, so it does not need to be charged or have its power cell replaced periodically. Unlocking is performed in two stages: first, authorization is granted in the NFC application, then the retractable rotary knob is used to perform the mechanical unlocking action.

Turning the knob alone is not sufficient to unlock the padlock. NFC authorization in the application is required first, followed by a physical turn-and-press action.

A retractable rotary knob is integrated into the lock body. In the locked state, it remains recessed, and after NFC access has been authorized, it can be used to unlock the padlock.

Without NFC authorization, turning the knob does not unlock the padlock. The design is intended so that mechanical turning of the knob without electronic access permission does not result in unlocking.

When locking, the knob is turned back to the locked position and pressed down. This two-action sequence helps ensure that the knob is fully returned to the locked state.

• There is no battery inside the lock.
• No charging is required.
• No periodic battery replacement is required.
• No wired power supply is required.
• Energy is transferred from an NFC-enabled smartphone during unlocking.

Access rights are managed in the application. The administrator can grant other users permission to unlock the padlock.

• User authorization.
• Granting access rights.
• Sharing access rights.
• Access management in the application.

The application allows viewing unlocking and access-right records. The data can be checked and exported, making it possible to track when unlocking actions were performed and how access rights were granted.

The padlock has an IP65 protection rating and is designed to protect against dust and water jets. The construction is suitable for use in outdoor storage facilities, gates and other similar locations.

The lock body is made of zinc alloy, while the shackle is made of stainless steel. Shackle diameter – 10 mm.

• NFC unlocking by smartphone.
• NFC reverse power supply from the phone.
• No battery inside the lock.
• No charging required.
• No periodic battery replacement required.
• Retractable rotary knob.
• Dual-action unlocking.
• The knob operates only together with the NFC authorization principle.
• Two-step locking action.
• APP access rights management.
• User authorization.
• Viewing unlocking and access records.
• Data export capability.
• IP65 protection rating.
• 10 mm stainless steel shackle.

• Self-storage facility gates.
• Roll-up storage doors.
• Warehouses.
• Outdoor gates.
• Fences.
• Outdoor storage facilities.

1. Bring an authorized NFC-enabled smartphone close to the lock's NFC zone.
2. Wait until the lock receives power and confirms the access right.
3. Pull out the rotary knob.
4. Turn the knob to the unlocked position.
5. Open the padlock.

1. Close the padlock shackle.
2. Turn the knob back to the locked position.
3. Press the knob down.

• Use an NFC-enabled smartphone for NFC unlocking.
• Access permission must be granted in the application.
• Without NFC authorization, turning the knob alone does not unlock the padlock.
• When locking, the knob must be returned to the locked position and pressed down.
• The padlock does not need to be charged because it contains no battery.
• Before use, check whether the 10 mm shackle and the lock dimensions are suitable for the specific object.

Passive NFC Padlock | battery-free | IP65 | 10 mm shackle

Smart NFC padlock without an internal battery, equipped with a retractable rotary knob. Unlocking requires NFC application authorization followed by a mechanical turning action of the knob. The padlock has an IP65 protection rating, zinc alloy body, 10 mm stainless steel shackle, APP access rights management and unlocking record viewing.