Products catalog

  • Smart switch module | ZigBee | 1 channel | 10 A | LED up to 250 W | 100–240 V AC | flush-mounted | TUYA | OURTOP ATMSMSZ01

    Code: ATMSMSZ01

    Compact ZigBee module installed in the box behind an existing switch: lighting can be controlled both with the usual switch (terminal S1) and with the Tuya / Smart Life app or voice.

  • Smart switch module | ZigBee | 1 channel | 10 A | LED up to 250 W | 100–240 V AC | flush-mounted | TUYA | OURTOP ATMSMSZ01

    Compact ZigBee module installed in the box behind an existing switch: lighting can be controlled both with the usual switch (terminal S1) and with the Tuya / Smart Life app or voice.

    Key point:
    The existing switch stays on the wall, while the lighting gains schedules, scenes and phone control. The module fits in the box behind the switch, so there is no need to break walls or change the switch range.
    Maximum load
    10 A, LED up to 250 W
    Channels
    1
    Connectivity
    ZigBee
    Mounting
    in-wall

    Operating principle

    The module is installed in the wall box behind the switch: L and N for supply, L1 output to the luminaire, S1 to the existing switch.

    Commands come via a Tuya ZigBee gateway from the Tuya Smart / Smart Life app or a voice assistant, while the existing switch works as before.

    The result: an ordinary luminaire becomes part of the smart system with schedules and scenes.

    Why choose ATMSMSZ01?
    It is the most affordable way to make existing lighting smart: the same switches stay, and control appears on the phone.

    Technical specifications

    Product typeFlush-mounted switch module (ZigBee)
    Manufacturer / modelOURTOP ATMSMSZ01
    Supply voltage100–240 V AC, 50/60 Hz
    Maximum load10 A, LED up to 250 W
    Channels1
    TerminalsL, L1, N, S1
    ConnectivityZigBee (Tuya)
    App / ecosystemTuya Smart / Smart Life, Alexa, Google Assistant
    MountingWall box behind the switch
    MarkingCE

    Key functions

    • App control – switching and status on the phone.
    • Existing switch (S1) – wall control remains.
    • Schedules – switching by time.
    • Scenes – work together with other Tuya ZigBee devices.
    • Voice control – Alexa and Google Assistant.

    Where is it used?

    • Apartments and houses without breaking walls
    • Renovations where the existing switch range is kept
    • Corridor and stair lighting
    • Outdoor luminaires by schedule
    • Rental homes with remote control
    • Offices and small premises

    Use by need

    For the homeowner.
    Lighting is controlled by phone and voice, while the switches stay.
    For the electrician.
    A small module into the existing box – a quick smart upgrade without replacing cables.
    For the landlord.
    Can check and switch off lights left on, remotely.

    Practical example

    If the corridor light is often left on, ATMSMSZ01 behind the existing switch lets you set a scheduled switch-off and check the state on the phone, while the switch works as before.

    Advantages

    • Existing switches and their design stay
    • Fits in a wall box
    • LED load up to 250 W
    • ZigBee network does not load Wi-Fi
    • Alexa and Google Assistant support

    Limitations

    • Requires a Tuya ZigBee gateway (e.g. OURTOP ATMSGZ01A)
    • A neutral wire (N) is required in the box
    • One channel – several groups need several modules
    • Remote access needs internet and the Tuya cloud

    Safety and installation notes

    • Install only with the power disconnected; work in the panel must be done by a qualified electrician.
    • Use a deep wall box so the module and wires fit without being squeezed.
    • Connect the existing switch or button to the input only according to the manufacturer diagram.
    • Do not exceed 10 A and 250 W of LED load.
    • Protect the supply and load circuits with a circuit breaker selected for the cable and load.

    Quick selection guide

    1 channel
    LED ≤ 250 W
    ZigBee
    in-wall
    Suitable when you need:
    • Make an existing switch smart
    • Control a luminaire by phone and voice
    • Lighting schedules
    Check before use:
    • That there is a neutral wire (N) in the box
    • That you have a Tuya ZigBee gateway and its signal reaches the room
    • That the wall box is deep enough for the module
    Important: ATMSMSZ01 is not a protective device – the lighting circuit must still be protected by a circuit breaker in the panel.

    FAQ

    Is a ZigBee gateway required?
    Yes, the module connects via a Tuya ZigBee gateway.
    Is a neutral wire needed?
    Yes, the module has an N terminal and is wired with a neutral.
    Will the existing switch still work?
    Yes, it is connected to terminal S1.
    What load can be connected?
    Up to 10 A; LED luminaires up to 250 W.
    How many channels does it have?
    One channel – one lighting group.
    Does it support voice control?
    Yes, Alexa and Google Assistant work via Tuya / Smart Life.

    Smart switch module | ZigBee | 1 channel | 10 A | LED up to 250 W | 100–240 V AC | flush-mounted | TUYA | OURTOP ATMSMSZ01

    ATMSMSZ01 is an in-wall single-channel ZigBee switch module, 10 A, LED up to 250 W, with an S1 input for the existing switch. It adds phone, voice and schedule control without replacing switches.

    Published: 2026-11-19 · Data verified against the manufacturer specification: 2026-11-19

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • privacy policy

    Information