Smart timer relay with energy meter | ZigBee | 16 A | 100–240 V AC | external button input | DIN | TUYA | OURTOP ATMS1602Z
Code: ATMS1602ZPrice 71.15 € VAT incl.( 58.80 € VAT excl. )DIN-rail ZigBee timer relay with energy metering: switches a 16 A circuit by Tuya schedule or timer and shows its consumption.
-
Smart timer relay with energy meter | ZigBee | 16 A | 100–240 V AC | external button input | DIN | TUYA | OURTOP ATMS1602Z
DIN-rail ZigBee timer relay with energy metering: switches a 16 A circuit by Tuya schedule or timer and shows its consumption. Terminals A1/A2 allow an external push button.
Key point:
ATMS1602Z is a simple way to control a separate circuit of up to 16 A by schedule and from your phone without changing the panel layout. ZigBee keeps the load off your home Wi-Fi and works reliably in a system built around one Tuya gateway. Built-in energy metering shows how many kWh the connected equipment uses.Contact rating
16 A / 250 V ACConnectivity
ZigBeeSupply voltage
100–240 V ACMetering
kWhOperating principle
The device is mounted on a 35 mm DIN rail in the panel and takes one module. Supply is connected to its terminals, and the controlled circuit runs through the 16 A relay contact.
Commands arrive via ZigBee from the Tuya Smart / Smart Life app: manual switching, weekly schedules, countdown. An external push-button is connected to terminals A1/A2, so the circuit can also be switched without a phone.
The device measures the energy (kWh) of the connected load, so consumption is visible in the app and you can estimate what the equipment costs to run.
Why choose ATMS1602Z?
One DIN module replaces a mechanical timer and a manual switch as well as a separate check meter: the schedule is changed on the phone, not in the panel, and the equipment state is visible from anywhere.Technical specifications
Product type Smart timer relay with meter (ZigBee) Manufacturer / model OURTOP ATMS1602Z Supply voltage 100–240 V AC, 50/60 Hz Contact rating 16 A / 250 V AC (cos φ = 1) Metering kWh External control Terminals A1/A2 for an external push button Connectivity ZigBee (Tuya) App / ecosystem Tuya Smart / Smart Life, Alexa, Google Assistant Mounting DIN 35 mm, 1 module Marking CE Key functions
- Weekly schedules – equipment switches on and off by itself.
- Countdown – the circuit switches off after a set time, even if you forget.
- Energy metering – consumption in kWh is visible in the app.
- Remote control – switching and status on your phone from anywhere (via a ZigBee gateway).
- External button (A1/A2) – the circuit can also be controlled with an ordinary wall push-button.
- Voice control – Alexa and Google Assistant commands.
Where is it used?
- Electric water heater by tariff or schedule
- Outdoor, facade and advertising lighting
- Circulation pumps and ventilation
- Electric heating and heating cables up to 16 A
- Country houses, cottages and garages with remote control
- Office and shop equipment by working hours
Use by need
For the homeowner.
Runs the water heater, heating or outdoor lighting by schedule and controls them from the phone.For the electrician.
One DIN module instead of a mechanical timer – quick installation and a clear handover to the customer.For saving energy.
Seeing the real consumption of the equipment lets you shift its operation to cheaper tariff hours.Practical example
If the water heater keeps heating around the clock, ATMS1602Z in the panel lets you run it only at the cheaper tariff and before the morning shower, while the app shows how many kWh are used per day. The water is hot when needed and the heater does not run for nothing.Advantages
- Takes only one DIN module
- Wide supply range 100–240 V AC
- 16 A contact for a separate circuit
- ZigBee network does not load Wi-Fi
- External button input A1/A2
- Built-in kWh metering
- Alexa and Google Assistant support
Limitations
- Requires a Tuya ZigBee gateway (e.g. OURTOP ATMSGZ01A)
- No overload or short-circuit protection – a circuit breaker is required
- Motor and high-inrush loads need an intermediate contactor
- The meter is not MID-approved – not for billing
- Remote control needs internet and the Tuya cloud
Safety and installation notes
- Install only with the power disconnected; work in the panel must be done by a qualified electrician.
- Protect the circuit with a circuit breaker selected for the cable cross-section and load.
- Do not exceed 16 A; use an intermediate contactor for motors, compressors and high-inrush equipment.
- A metal enclosure weakens the radio signal – check the connection before closing the door.
- Connect the external button (A1/A2) only according to the manufacturer diagram on the housing or in the manual.
Quick selection guide
16 AZigBee100–240 V ACDIN 1 modulekWhSuitable when you need:- Control a circuit by time and from the phone
- Keep an ordinary wall push-button
- See the equipment consumption in kWh
Check before use:- Load current does not exceed 16 A and motors have a contactor
- That you have a Tuya ZigBee gateway and its signal reaches the panel
- That the circuit is protected by a suitable circuit breaker
Important: ATMS1602Z does not replace a circuit breaker or residual current device and is not a billing meter: it is a control device, not circuit protection.FAQ
Is a ZigBee gateway required?
Yes, ATMS1602Z connects via a Tuya ZigBee gateway.Can it be operated without a phone?
Yes, with an external button connected to terminals A1/A2.What load can be connected?
Up to 16 A / 250 V AC; connect motors and high-inrush equipment via a contactor.Will it work if the internet goes down?
Remote control will not work without internet; the local button works without it.How much panel space does it take?
One DIN module.Can the meter be used for billing?
No, the metering is for monitoring; billing requires a MID-approved meter.Smart timer relay with energy meter | ZigBee | 16 A | 100–240 V AC | external button input | DIN | TUYA | OURTOP ATMS1602Z
ATMS1602Z is a 16 A ZigBee DIN-rail timer relay with kWh metering for schedules, remote and push-button control. Suitable for water heaters, lighting, pumps and heating in homes, cottages and commercial sites.
Published: 2026-11-19 · Data verified against the manufacturer specification: 2026-11-19
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review








