Products catalog

  • Smart timer relay with energy meter | ZigBee | 40 A | 1P | 100–240 V AC | kWh | DIN | TUYA | OURTOP ATMS4012Z

    Code: ATMS4012Z

    DIN-rail ZigBee timer relay with a 40 A contact and energy metering: switches a circuit by schedule or from the Tuya app and shows consumed energy (kWh).

  • Smart timer relay with energy meter | ZigBee | 40 A | 1P | 100–240 V AC | kWh | DIN | TUYA | OURTOP ATMS4012Z

    DIN-rail ZigBee timer relay with a 40 A contact and energy metering: switches a circuit by schedule or from the Tuya app and shows consumed energy (kWh). Terminals C1/C2 are for an external push button.

    Key point:
    ATMS4012Z is a simple way to control a separate circuit of up to 40 A by schedule and from your phone without changing the panel layout. ZigBee keeps the load off your home Wi-Fi and works reliably in a system built around one Tuya gateway. Built-in energy metering shows how many kWh the connected equipment uses.
    Contact rating
    40 A / 250 V AC
    Connectivity
    ZigBee
    Supply voltage
    100–240 V AC
    Metering
    kWh

    Operating principle

    The device is mounted on a 35 mm DIN rail in the panel and takes one module. Supply is connected to its terminals, and the controlled circuit runs through the 40 A relay contact.

    Commands arrive via ZigBee from the Tuya Smart / Smart Life app: manual switching, weekly schedules, countdown. An external push-button is connected to terminals C1/C2, so the circuit can also be switched without a phone.

    The device measures the energy (kWh) of the connected load, so consumption is visible in the app and you can estimate what the equipment costs to run.

    Why choose ATMS4012Z?
    One DIN module replaces a mechanical timer and a manual switch as well as a separate check meter: the schedule is changed on the phone, not in the panel, and the equipment state is visible from anywhere.

    Technical specifications

    Product typeSmart timer relay with meter (ZigBee)
    Manufacturer / modelOURTOP ATMS4012Z
    Supply voltage100–240 V AC, 50/60 Hz
    Contact rating40 A / 250 V AC
    MeteringkWh
    ConnectivityZigBee (Tuya)
    External controlTerminals C1/C2 for an external push button
    MountingDIN 35 mm, 1 module
    Dimensions19 × 90,3 × 65,5 mm
    MarkingCE

    Key functions

    • Weekly schedules – equipment switches on and off by itself.
    • Countdown – the circuit switches off after a set time, even if you forget.
    • Energy metering – consumption in kWh is visible in the app.
    • Remote control – switching and status on your phone from anywhere (via a ZigBee gateway).
    • External button (C1/C2) – the circuit can also be controlled with an ordinary wall push-button.

    Where is it used?

    • Electric water heater by tariff or schedule
    • Outdoor, facade and advertising lighting
    • Circulation pumps and ventilation
    • Electric heating and heating cables up to 40 A
    • Country houses, cottages and garages with remote control
    • Office and shop equipment by working hours

    Use by need

    For the homeowner.
    Runs the water heater, heating or outdoor lighting by schedule and controls them from the phone.
    For the electrician.
    One DIN module instead of a mechanical timer – quick installation and a clear handover to the customer.
    For saving energy.
    Seeing the real consumption of the equipment lets you shift its operation to cheaper tariff hours.

    Practical example

    If the water heater keeps heating around the clock, ATMS4012Z in the panel lets you run it only at the cheaper tariff and before the morning shower, while the app shows how many kWh are used per day. The water is hot when needed and the heater does not run for nothing.

    Advantages

    • Takes only one DIN module
    • Wide supply range 100–240 V AC
    • 40 A contact for a separate circuit
    • ZigBee network does not load Wi-Fi
    • External button input C1/C2
    • Built-in kWh metering

    Limitations

    • Requires a Tuya ZigBee gateway (e.g. OURTOP ATMSGZ01A)
    • No overload or short-circuit protection – a circuit breaker is required
    • Motor and high-inrush loads need an intermediate contactor
    • The meter is not MID-approved – not for billing
    • Remote control needs internet and the Tuya cloud

    Safety and installation notes

    • Install only with the power disconnected; work in the panel must be done by a qualified electrician.
    • Protect the circuit with a circuit breaker selected for the cable cross-section and load.
    • Do not exceed 40 A; use an intermediate contactor for motors, compressors and high-inrush equipment.
    • A metal enclosure weakens the radio signal – check the connection before closing the door.
    • Connect the external button (C1/C2) only according to the manufacturer diagram on the housing or in the manual.

    Quick selection guide

    40 A
    ZigBee
    100–240 V AC
    DIN 1 module
    kWh
    Suitable when you need:
    • Control a circuit by time and from the phone
    • Keep an ordinary wall push-button
    • See the equipment consumption in kWh
    Check before use:
    • Load current does not exceed 40 A and motors have a contactor
    • That you have a Tuya ZigBee gateway and its signal reaches the panel
    • That the circuit is protected by a suitable circuit breaker
    Important: ATMS4012Z does not replace a circuit breaker or residual current device and is not a billing meter: it is a control device, not circuit protection.

    FAQ

    Is a ZigBee gateway required?
    Yes, ATMS4012Z connects via a Tuya ZigBee gateway.
    Can it be operated without a phone?
    Yes, with an external button connected to terminals C1/C2.
    What load can be connected?
    Up to 40 A / 250 V AC; connect motors and high-inrush equipment via a contactor.
    Will it work if the internet goes down?
    Remote control will not work without internet; the local button works without it.
    How much panel space does it take?
    One DIN module.
    Can the meter be used for billing?
    No, the metering is for monitoring; billing requires a MID-approved meter.

    Smart timer relay with energy meter | ZigBee | 40 A | 1P | 100–240 V AC | kWh | DIN | TUYA | OURTOP ATMS4012Z

    ATMS4012Z is a 40 A ZigBee DIN-rail timer relay with kWh metering for schedules, remote and push-button control. Suitable for water heaters, lighting, pumps and heating in homes, cottages and commercial sites.

    Published: 2026-11-19 · Data verified against the manufacturer specification: 2026-11-19

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • privacy policy

    Information