Products catalog

  • Smart timer relay | ZigBee | 20 A | 100–240 V AC | cycle mode | external button input | DIN | TUYA | OURTOP ATMS2002Z

    Code: ATMS2002Z

    DIN-rail ZigBee timer relay with a 20 A contact: schedules, countdown and cycle mode in the Tuya / Smart Life app, while terminals A1/A2 allow an external NO push button.

  • Smart timer relay | ZigBee | 20 A | 100–240 V AC | cycle mode | external button input | DIN | TUYA | OURTOP ATMS2002Z

    DIN-rail ZigBee timer relay with a 20 A contact: schedules, countdown and cycle mode in the Tuya / Smart Life app, while terminals A1/A2 allow an external NO push button.

    Key point:
    ATMS2002Z is a simple way to control a separate circuit of up to 20 A by schedule and from your phone without changing the panel layout. ZigBee keeps the load off your home Wi-Fi and works reliably in a system built around one Tuya gateway.
    Contact rating
    20 A / 250 V AC
    Connectivity
    ZigBee
    Supply voltage
    100–240 V AC
    Modes
    schedule, countdown, cycle

    Operating principle

    The device is mounted on a 35 mm DIN rail in the panel and takes one module. Supply is connected to its terminals, and the controlled circuit runs through the 20 A relay contact.

    Commands arrive via ZigBee from the Tuya Smart / Smart Life app: manual switching, weekly schedules, countdown, cycle mode. An external push-button is connected to terminals A1/A2, so the circuit can also be switched without a phone.

    The result: an ordinary panel circuit becomes remotely and time-controlled, and its state is always visible in the app.

    Why choose ATMS2002Z?
    One DIN module replaces a mechanical timer and a manual switch: the schedule is changed on the phone, not in the panel, and the equipment state is visible from anywhere.

    Technical specifications

    Product typeSmart timer relay (ZigBee)
    Manufacturer / modelOURTOP ATMS2002Z
    Supply voltage100–240 V AC, 50/60 Hz
    Contact rating20 A / 250 V AC (cos φ = 1)
    ConnectivityZigBee (Tuya)
    External controlTerminals A1/A2 for an external NO push button
    App / ecosystemTuya Smart / Smart Life, Alexa, Google Assistant
    MountingDIN 35 mm, 1 module (17.5 mm)
    Dimensions17,5 × 86,5 × 70,5 mm
    MarkingCE

    Key functions

    • Weekly schedules – equipment switches on and off by itself.
    • Countdown – the circuit switches off after a set time, even if you forget.
    • Cycle mode – alternately switches on and off, e.g. for a circulation pump.
    • Remote control – switching and status on your phone from anywhere (via a ZigBee gateway).
    • External button (A1/A2) – the circuit can also be controlled with an ordinary wall push-button.
    • Voice control – Alexa and Google Assistant commands.

    Where is it used?

    • Electric water heater by tariff or schedule
    • Outdoor, facade and advertising lighting
    • Circulation pumps and ventilation
    • Electric heating and heating cables up to 20 A
    • Country houses, cottages and garages with remote control
    • Office and shop equipment by working hours

    Use by need

    For the homeowner.
    Runs the water heater, heating or outdoor lighting by schedule and controls them from the phone.
    For the electrician.
    One DIN module instead of a mechanical timer – quick installation and a clear handover to the customer.
    For the cottage or garage owner.
    Switches equipment on remotely before arriving and checks that everything is off.

    Practical example

    If the water heater keeps heating around the clock, ATMS2002Z in the panel lets you run it only at the cheaper tariff and before the morning shower. The water is hot when needed and the heater does not run for nothing.

    Advantages

    • Takes only one DIN module
    • Wide supply range 100–240 V AC
    • 20 A contact for a separate circuit
    • ZigBee network does not load Wi-Fi
    • External button input A1/A2
    • Cycle mode in the app
    • Alexa and Google Assistant support

    Limitations

    • Requires a Tuya ZigBee gateway (e.g. OURTOP ATMSGZ01A)
    • No overload or short-circuit protection – a circuit breaker is required
    • Motor and high-inrush loads need an intermediate contactor
    • No energy metering – choose a metering version if needed
    • Remote control needs internet and the Tuya cloud

    Safety and installation notes

    • Install only with the power disconnected; work in the panel must be done by a qualified electrician.
    • Protect the circuit with a circuit breaker selected for the cable cross-section and load.
    • Do not exceed 20 A; use an intermediate contactor for motors, compressors and high-inrush equipment.
    • A metal enclosure weakens the radio signal – check the connection before closing the door.
    • Connect the external button (A1/A2) only according to the manufacturer diagram on the housing or in the manual.

    Quick selection guide

    20 A
    ZigBee
    100–240 V AC
    DIN 1 module
    Suitable when you need:
    • Control a circuit by time and from the phone
    • Keep an ordinary wall push-button
    • Control a separate circuit up to 20 A
    Check before use:
    • Load current does not exceed 20 A and motors have a contactor
    • That you have a Tuya ZigBee gateway and its signal reaches the panel
    • That the circuit is protected by a suitable circuit breaker
    Important: ATMS2002Z does not replace a circuit breaker or residual current device: it is a control device, not circuit protection.

    FAQ

    Is a ZigBee gateway required?
    Yes, ATMS2002Z connects via a Tuya ZigBee gateway.
    Can it be operated without a phone?
    Yes, with an external button connected to terminals A1/A2.
    What load can be connected?
    Up to 20 A / 250 V AC; connect motors and high-inrush equipment via a contactor.
    Will it work if the internet goes down?
    Remote control will not work without internet; the local button works without it.
    How much panel space does it take?
    One DIN module.
    Does it support voice control?
    Yes, Alexa and Google Assistant work via Tuya / Smart Life.

    Smart timer relay | ZigBee | 20 A | 100–240 V AC | cycle mode | external button input | DIN | TUYA | OURTOP ATMS2002Z

    ATMS2002Z is a 20 A ZigBee DIN-rail timer relay for schedules, remote and push-button control. Suitable for water heaters, lighting, pumps and heating in homes, cottages and commercial sites.

    Published: 2026-11-19 · Data verified against the manufacturer specification: 2026-11-19

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • privacy policy

    Information