Smart Wi-Fi + Bluetooth socket | plug-in outlet | thermostat 5-35°C | 16A | 3680W | 230V | white | IP20 | ADAX | WT3

Smart plug socket | Wi-Fi + Bluetooth | thermostat 5–35 °C | 16 A | 3680 W | ADAX WiFi WT3 Plug

The ADAX WiFi WT3 Plug smart plug socket is designed for remote control of electric heaters and other electrical appliances via the ADAX Wi-Fi app. The device can operate either as a simple remotely controlled ON/OFF socket or as a thermostatic controller for an electric heater. The integrated temperature sensor and 5–35 °C adjustment range allow the set room temperature to be maintained, while Wi-Fi connectivity enables settings to be changed remotely.

ADAX WiFi WT3 Plug allows a conventional electric heater or another plug-in appliance to be upgraded with smart remote control. Two main functions can be selected – ON/OFF control or thermostat mode. The app allows weekly schedules to be created, energy consumption to be monitored and the device to be controlled regardless of location.

The device is used with the ADAX Wi-Fi app. Bluetooth simplifies the initial pairing of the smart plug with the app and Wi-Fi network.

Once connected to Wi-Fi, its settings can be controlled remotely from a smartphone or tablet.

In thermostat mode, the desired temperature can be set from 5 to 35 °C. The integrated temperature sensor monitors the room temperature, while the socket controls the power supply of the connected electric heater according to the set value. This allows an older electric radiator or another compatible heating appliance to be upgraded with programmable and remote control.

The maximum load is 16 A or 3680 W.

Before connecting a heater or another electrical appliance, its rated power and current must be checked. The load of the connected device must not exceed the permitted values of the smart plug.

• Short button press: ON/OFF function; the indicator switches between green and blue states.
• Hold the button for approx. 4 s: the device enters installation / pairing mode, and the indicator flashes blue.
• Hold the button for approx. 8 s: factory reset is performed, and the indicator flashes red / blue.
• Green indication: power is on.
• Permanent blue indication: the device is connected to the Wi-Fi network.

1. Download the ADAX Wi-Fi app.
2. Select adding a new device in the app.
3. Select the “Smart plug WiFi + Bluetooth” device type.
4. Select the required function – ON/OFF or thermostat mode.
5. Insert the smart plug into the wall socket and switch it on.
6. Follow the connection instructions shown in the app.

• For temperature-based control of electric radiators and heaters.
• For upgrading older electric heaters with smart thermostatic control.
• For remote switching of electrical appliances on and off.
• For coffee machines and other compatible household appliances.
• For automation of homes, apartments, offices, holiday premises and other indoor spaces.
• For locations where weekly operating or heating schedules are useful.

• IP20 is intended for dry indoor areas.
• The device is not intended for outdoor use.
• Operating ambient temperature: –10…+40 °C.
• Permitted ambient humidity: 5–90 % RH, non-condensing.
• The device must be protected from water, condensation and direct exposure to moisture.

• Before connecting an appliance, its rated current and power must be checked.
• Maximum ADAX WT3 Plug load – 16 A / 3680 W.
• The thermostat setting range of 5–35 °C must not be confused with the permitted ambient operating temperature of –10…+40 °C.
• The thermostat function is suitable only for heating appliances that can be controlled by switching their power supply on and off.
• Before use with a specific appliance, ensure that its manufacturer permits this type of power control.
• A functioning network connection is required for Wi-Fi remote control.
• Bluetooth is used to simplify initial device pairing.

ADAX WiFi WT3 Plug | smart plug with thermostat | Wi-Fi + Bluetooth | 16 A | 3680 W

ADAX WiFi WT3 Plug is a smart plug socket for remote control of electric heaters and other compatible electrical appliances. ON/OFF or thermostat mode can be selected, temperature can be set from 5–35 °C, weekly schedules can be created and energy consumption can be monitored. Maximum load is 16 A / 3680 W, operating ambient temperature is –10…+40 °C, protection class is IP20 and the product is covered by a 5-year warranty.