Surface-Mounted Socket Outlet | Switch Frame | 2-Gang | Plastic | Retro Style | Black

Black 2-gang surface-mounted frame – retro and loft style, 170 × 85 mm

2-gang surface-mounted frame is designed to aesthetically combine two compatible surface-mounted electrical installation components into one common block. Socket outlets, light switches or a combination of both can be installed in the frame, provided the selected components are compatible with this type of frame.

The classic black design is suitable for retro, vintage, loft, industrial and rustic interiors. The frame helps maintain even spacing between several electrical installation components and creates a neat overall composition on the wall.

The product is made of PVC plastic. The stated external dimensions are 170 × 85 mm. The frame is a finishing and joining element – it does not replace the socket outlets, switches, their internal mechanisms or mounting bases.

• Two surface-mounted switches.
• Two surface-mounted socket outlets.
• One switch and one socket outlet.

• Use switches and socket outlets in the same colour.
• Combine the frame with cable fixing elements of the same style.
• Maintain a consistent mounting height throughout the room.
• Plan the cable entry direction and component sequence in advance.

• 2-gang design.
• Designed for surface-mounted switches and socket outlets.
• Helps combine two components into one unified block.
• Retro, loft and vintage design.
• Black housing colour.
• PVC plastic construction.
• External dimensions 170 × 85 mm.
• Suitable for exposed surface-mounted installations.
• Helps maintain equal spacing between components.
• Electrical mechanisms are selected separately.

1. Select the components to be installed. Check that both switches or socket outlets are compatible with the frame.
2. Plan the component sequence. Decide in advance where the switches and socket outlets will be positioned.
3. Disconnect the power supply. Check that the circuits are de-energised.
4. Select the installation location. There must be enough space on the wall for the 170 × 85 mm frame and cable entries.
5. Check the frame position. Use a spirit level to ensure the two-component block is installed straight.
6. Mark the mechanism and fixing positions. Follow the mounting design of the specific switches or socket outlets.
7. Prepare the cable entries. Wires must not be pinched by the frame or the edges of the mechanisms.
8. Install the electrical mechanisms. Connect them according to the wiring diagram and terminal markings.
9. Fit the frame. Check that all components align precisely with the openings.
10. Secure the assembly. Do not overtighten the plastic parts.
11. Check the alignment. Both components must be aligned in one line and must not press against the frame.
12. Restore power and check operation. The electrical installation must be checked by a qualified specialist.

• Use only with mutually compatible surface-mounted components.
• Do not install a cracked, deformed or otherwise damaged frame.
• Do not overtighten plastic fixing points.
• Protect the frame from strong impacts and high temperatures.
• Do not use abrasive sponges or aggressive solvents.
• Clean with a soft dry or slightly damp cloth.
• Periodically check that the frame and mechanisms have not become loose.
• Disconnect the power before dismantling the frame or electrical components.

Black 2-gang surface-mounted frame for retro installations

The 2-gang frame is designed to combine compatible surface-mounted light switches and socket outlets into one unified horizontal block.

The classic retro and loft-style design is suitable for vintage interiors, restored manor houses, country homes, wooden houses, lofts, hotels, restaurants and residential spaces.

The black frame is made of PVC plastic. Its external dimensions are 170 × 85 mm. The frame helps maintain equal spacing between the two electrical installation components and gives them a unified, finished appearance.

The product is a finishing and joining element. Switches, socket outlets, internal mechanisms and fixing parts must be selected separately according to the specific project.