Surface-Mounted Socket Outlet | Switch Frame | 3-Gang | Plastic | Retro Style | White

White 3-gang surface-mounted frame – retro and loft style, 227 × 85 mm

Three-gang surface-mounted frame is designed to combine three compatible surface-mounted electrical installation components into one neat, unified block. The frame can accommodate socket outlets, light switches or a combination of both, provided that the selected components are compatible with this type of frame.

The classic white design is suitable for retro, vintage, loft, industrial and rustic-style interiors. The frame helps maintain consistent alignment of several electrical installation components and creates a neat, unified arrangement on the wall.

The product is made of PVC plastic. The specified external dimensions are 227 × 85 mm. The frame is a finishing and joining component; it does not replace the socket outlets, switches, their internal mechanisms or mounting bases.

• Three surface-mounted switches.
• Three surface-mounted socket outlets.
• Two switches and one socket outlet.
• One switch and two socket outlets.

• Use switches and socket outlets in the same colour.
• Match the frame with cable fixing elements of the same style.
• Maintain the same installation height throughout the room.
• Plan the cable entry direction and the sequence of components in advance.

• Three-gang design.
• Designed for surface-mounted switches and socket outlets.
• Combines three components into one unified block.
• Retro, loft and vintage design.
• White frame colour.
• PVC plastic construction.
• External dimensions: 227 × 85 mm.
• Suitable for exposed surface-mounted installations.
• Helps maintain equal spacing between components.
• Electrical mechanisms are selected separately.

1. Select the components to be installed. Check that all three switches or socket outlets are compatible with the frame.
2. Plan the component sequence. Decide in advance where the switches and socket outlets will be positioned.
3. Disconnect the power supply. Verify that the circuits are de-energised.
4. Select the installation location. The wall must provide enough space for the 227 × 85 mm frame and cable entries.
5. Check the frame position. Use a spirit level to ensure that the three-component block is installed straight.
6. Mark the mechanism and fixing positions. Follow the mounting design of the specific switches or socket outlets.
7. Prepare the cable entry. The cables must not be pinched by the edges of the frame or mechanisms.
8. Install the electrical mechanisms. Connect them according to the wiring diagram and terminal markings.
9. Fit the frame. Check that all components align precisely with the openings.
10. Secure the assembly. Do not overtighten the plastic parts.
11. Check the alignment. All three components must be aligned and must not place pressure on the frame.
12. Restore the power supply and check operation. The electrical installation must be checked by a qualified specialist.

• Use only with mutually compatible surface-mounted components.
• Do not install a cracked, deformed or otherwise damaged frame.
• Do not overtighten plastic fixing points.
• Protect the frame from strong impacts and high temperatures.
• Do not use abrasive sponges or aggressive solvents.
• Clean with a soft dry or slightly damp cloth.
• Periodically check that the frame and mechanisms have not become loose.
• Disconnect the power supply before removing the frame or electrical components.

White three-gang surface-mounted frame for retro installations

The three-gang frame is designed to combine compatible surface-mounted light switches and socket outlets into one unified horizontal block.

The classic retro and loft-style design is suitable for vintage interiors, restored manor houses, country homes, wooden houses, lofts, hotels, restaurants and residential rooms.

The white frame is made of PVC plastic. Its external dimensions are 227 × 85 mm. The frame helps maintain equal spacing between three electrical installation components and gives them a unified, finished appearance.

The product is a finishing and joining component. Switches, socket outlets, internal mechanisms and fixing parts must be selected separately according to the specific project.