Surface-Mounted Socket | Switch Frame | 1-Gang | Plastic | Retro Style | Black

Black 1-gang surface-mounted frame – retro and loft style, 85 × 85 mm

Single-gang surface-mounted frame is designed to neatly frame one compatible surface-mounted electrical installation component – a socket outlet or light switch. The frame helps create a clean and finished appearance for surface-mounted installations.

The classic black design is suitable for retro, loft, vintage, industrial and rustic interiors. The frame can be used in modern lofts, restored buildings, country homes and other spaces where the electrical installation is intentionally left visible.

The product is made of thermoplastic. The stated external dimensions are 85 × 85 mm. The frame is installed together with a compatible surface-mounted socket outlet or switch and does not itself perform any circuit control or electrical connection function.

• For one surface-mounted light switch.
• For one surface-mounted socket outlet.
• For a standalone control element on the wall.
• To maintain a consistent retro installation style throughout the room.

• Combine with black surface-mounted switches.
• Use socket outlets with the same styling.
• Combine with black decorative cable holders or insulators.
• Maintain a consistent mounting height for electrical components.

• Single-gang design.
• Designed for a surface-mounted switch or socket outlet.
• Surface-mounted installation principle.
• Retro, loft and vintage design.
• Black colour.
• Thermoplastic construction.
• External dimensions 85 × 85 mm.
• Suitable for visible surface-mounted electrical installations.
• Mechanism selected separately according to compatibility.

1. Select the electrical component. Check whether the switch or socket outlet is compatible with the frame.
2. Disconnect the power supply. Make sure the circuit being worked on is de-energised.
3. Select the installation location. Make sure there is enough space on the wall for the 85 × 85 mm frame.
4. Check the wall surface. It must be stable and suitable for fixing the electrical mechanism.
5. Plan the cable entry direction.
6. Install the switch or socket outlet. Connect the conductors according to the wiring diagram of the specific mechanism.
7. Fit the frame. Check that it fits the mechanism precisely.
8. Secure the assembly. Do not overtighten the thermoplastic parts.
9. Check the alignment. The frame must not be twisted or mechanically stressed.
10. Restore power and check operation. The electrical part must be checked by a qualified specialist.

• Use only with a mechanically compatible surface-mounted component.
• Do not install a cracked, deformed or damaged frame.
• Do not overtighten plastic fixing parts.
• Protect from strong mechanical impacts.
• Do not place near strong heat sources unless their effect has been assessed.
• Clean with a soft dry or slightly damp cloth.
• Do not use abrasive cleaners or aggressive solvents.
• Disconnect the power before dismantling the electrical installation component.

Black single-gang surface-mounted frame for retro installations

The single-gang surface-mounted frame is designed to neatly frame one compatible light switch or socket outlet and integrate it into a visible surface-mounted electrical installation.

The black colour and classic retro and loft-style design are suitable for industrial lofts, vintage interiors, restored buildings, country homes, wooden houses, hotels, restaurants and residential interiors.

The frame is made of thermoplastic and its external dimensions are 85 × 85 mm. The rounded design creates a clear and tidy outline around a single electrical component on the wall.

The product is a finishing element. The switch, socket outlet, internal mechanism, wiring and fixing parts must be selected according to the specific project and mutual compatibility.

Before ordering, it is recommended to check the compatibility of the selected surface-mounted switch or socket outlet, the internal mounting dimensions, fixing design and exact configuration.