Products catalog

  • Three-phase Wi-Fi energy meter | 3 × split-core current transformers up to 100 A | bidirectional metering | DIN | TUYA | OURTOP ATMS100133

    Code: ATMS100133

    Three-phase DIN-rail Wi-Fi meter with three split-core current transformers up to 100 A: measures current, voltage and power per phase, and bidirectional metering shows energy exported by a solar plant.

  • Three-phase Wi-Fi energy meter | 3 × split-core current transformers up to 100 A | bidirectional metering | DIN | TUYA | OURTOP ATMS100133

    Three-phase DIN-rail Wi-Fi meter with three split-core current transformers up to 100 A: measures current, voltage and power per phase, and bidirectional metering shows energy exported by a solar plant. No need to disconnect wires – the transformers clip onto the cable.

    Key point:
    Three-phase metering without disconnecting cables: the current transformers clip onto the phase conductors and the data goes to the Tuya app. Bidirectional metering shows both energy drawn from and exported to the grid.
    Current transformers
    3 × 100 A
    Metering
    bidirectional kWh, U, I, P
    Connectivity
    Wi-Fi 2.4 GHz
    Mounting
    DIN 18 mm

    Operating principle

    The meter mounts on a 35 mm DIN rail, takes one 18 mm module and is powered with 100–240 V AC.

    Three split-core current transformers (up to 100 A, Ø16 mm opening) clip onto the L1, L2 and L3 conductors – no need to break the circuit. The meter measures current, voltage and power in each phase.

    Data is sent via 2.4 GHz Wi-Fi to the Tuya Smart / Smart Life app. Bidirectional metering counts consumed and exported energy separately, so it also suits homes with a solar plant.

    Why choose ATMS100133?
    One module and three clip-on transformers show the full three-phase picture – consumption, generation and phase loading – without rewiring the incomer.

    Technical specifications

    Product typeThree-phase Wi-Fi energy meter
    Manufacturer / modelOURTOP ATMS100133
    Supply voltage100–240 V AC, 50/60 Hz
    Current transformers3 × split-core, up to 100 A, Ø16 mm opening
    MeteringBidirectional kWh, U, I, P
    ConnectivityWi-Fi 2,4 GHz (Tuya)
    App / ecosystemTuya Smart / Smart Life
    MountingDIN 35 mm, 1 module (18 mm)
    Dimensions18 × 90 mm
    MarkingCE

    Key functions

    • Bidirectional kWh metering – consumed and exported energy separately.
    • U, I, P per phase – shows an overloaded or unbalanced phase.
    • Split-core transformers – installation without disconnecting conductors.
    • Wi-Fi and Tuya app – data on the phone without a separate gateway.
    • Compact housing – one 18 mm DIN module.

    Where is it used?

    • Homes with a solar plant
    • Monitoring consumption on a three-phase incomer
    • Phase load balance control
    • Energy monitoring of heat pumps and boiler rooms
    • Workshops, farms and small businesses
    • Consumption checks in rented premises (not for billing)

    Use by need

    For solar plant owners.
    Sees how much energy is drawn and exported and can match consumption to generation.
    For the facility energy manager.
    Phase currents and power help find an overloaded phase and plan load redistribution.
    For the electrician.
    The transformers clip onto existing conductors – installation without a long outage of the incomer.

    Practical example

    If the home has a solar plant, ATMS100133 on the incomer shows how much energy was drawn and exported, and the phase currents reveal, for example, that the heat pump and water heater overload the same phase.

    Advantages

    • Installation without disconnecting conductors
    • Bidirectional metering for solar
    • U, I, P in every phase
    • One DIN module (18 mm)
    • Wi-Fi without a separate gateway

    Limitations

    • Not MID-approved – not for billing
    • Up to 100 A per phase, the cable must fit a Ø16 mm opening
    • Works only with 2.4 GHz Wi-Fi
    • Remote access needs internet and the Tuya cloud

    Safety and installation notes

    • Install only with the power disconnected; work in the panel must be done by a qualified electrician.
    • Make the voltage measurement and supply connections only according to the manufacturer diagram and protect them.
    • Clip the transformers onto insulated conductors, observing the direction mark and phase order.
    • A metal enclosure weakens the radio signal – check the connection before closing the door.

    Quick selection guide

    3 × 100 A
    bidirectional kWh
    Wi-Fi 2.4 GHz
    DIN 18 mm
    Suitable when you need:
    • See solar export and import
    • Monitor three-phase consumption on the phone
    • Check phase loading
    Check before use:
    • Phase current does not exceed 100 A
    • The cable diameter fits a Ø16 mm opening
    • That a 2.4 GHz Wi-Fi signal reaches the panel
    Important: ATMS100133 is for monitoring and does not replace the utility meter or a MID-approved billing meter.

    FAQ

    Do the conductors have to be disconnected?
    No, the split-core transformers clip onto existing conductors.
    Is it suitable for a solar plant?
    Yes, bidirectional metering shows consumed and exported energy separately.
    What is the maximum current?
    Up to 100 A in each phase, transformer opening Ø16 mm.
    Can it be used for billing?
    No, the meter is not MID-approved and is intended for monitoring.
    Is a gateway needed?
    No, the meter connects directly to 2.4 GHz Wi-Fi.
    Where is the data shown?
    In the Tuya Smart / Smart Life app on the phone.

    Three-phase Wi-Fi energy meter | 3 × split-core current transformers up to 100 A | bidirectional metering | DIN | TUYA | OURTOP ATMS100133

    ATMS100133 is a three-phase Wi-Fi energy meter for DIN rail with three 100 A split-core current transformers and bidirectional metering. Suitable for homes with solar, businesses and phase load control.

    Published: 2026-11-19 · Data verified against the manufacturer specification: 2026-11-19

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • privacy policy

    Information