Ultrasonic proximity sensor | programmable | 80-2000mm | M30 | 10-30VDC | NO/NC | PNP | M12 | nickel-plated brass housing | IP65 | UB2000-30GM-E5-V15 | 097969

Technical Specifications

General Characteristics

Model: UB2000-30GM-E5-V15
Sensor type: Ultrasonic distance sensor
System: Single head
Detection range: 80 – 2000 mm
Adjustment range: 120 – 2000 mm
Blind zone: 0 – 80 mm
Reference target plate: 100 × 100 mm
Transducer frequency: ~180 kHz
Response time: ~150 ms

Electrical Characteristics

Operating voltage: 10 – 30 V DC
Voltage ripple: 10 %
No-load current: ≤ 50 mA

Output

Output type: PNP
Contact: NO / NC programmable
Rated current: 200 mA
Protection: Short-circuit and overload protection
Voltage drop: ≤ 2.5 V
Switching frequency: ≤ 3.3 Hz
Hysteresis: 1 % of the set distance
Repeat accuracy: ≤ 0.5 %

Synchronization Function

Bidirectional synchronization

Level 0: -UB ... +1 V
Level 1: +4 V ... +UB

Synchronization pulse: ≥ 100 µs
Pulse interval: ≥ 2 ms

Synchronization frequency:

Common mode: ≤ 30 Hz
Multiplex mode: ≤ 30 Hz / n (n ≤ 5 sensors)

Programming Input

Program input: 1
Input resistance: > 4.7 kΩ
Programming pulse: ≥ 1 s

Indication

LED indicators allow quick monitoring of the sensor status

Green LED

steady – power supply ON
flashing – programming function / object detected

Yellow LED

steady – switching output active
flashing – programming mode

Red LED

during normal operation – error indication
in programming mode – object not detected

Environmental Conditions

Operating temperature: −25 °C to +70 °C
Storage temperature: −40 °C to +85 °C

Mechanical Characteristics

Housing thread: M30 × 1.5
Housing material: Nickel-plated brass
Plastic parts: PBT
Ultrasonic transducer: Epoxy resin with glass microspheres
Weight: 140 g
Protection class: IP65

Dimensions

Total length: 94 mm
Lower section: 22 mm
Mounting nut wrench size: 36 mm
LED indication integrated at the rear of the sensor

Connection

Connector: M12
Contacts: 5-pin
Type: Connector M12 × 1

Factory Settings

Switching point A1: 220 mm
Switching point A2: 2100 mm
Output function: Window mode
Output state: NO contact

Standards and Certifications

Complies with the following standards:

EN 60947-5-2
IEC 60947-5-2

Certifications:

EAC TR CU 020/2011
UL (cULus Listed)
CSA (cCSAus Listed)
CCC (not required for products ≤36 V)

Functions

Object detection based on ultrasonic principle

Programmable switching points

5 different output functions

Synchronization capability for multiple sensors

Programming input

Temperature compensation

Resistance to compressed air influence

Ability to disable the sensor via control signal

Applications

For home users:
Although the sensor is designed for industrial use, it can also be applied in various technical projects such as automatic gate systems, water level measurement in tanks, and smart home projects.

For engineers and automation specialists:
The sensor is widely used in automation systems for object detection on conveyors, warehouse systems, robot navigation, automated production lines, and material position detection. Programmable functions allow precise adaptation of the sensor to specific systems.

For electricians and installers:
The sensor can be easily installed in electrical cabinets and automation systems. Typical applications include PLC-controlled systems, production equipment, packaging lines, transport conveyors, and industrial safety systems. The standard M30 design allows installation in most standard mounting brackets.

Advantages

Long detection range up to 2 meters

Reliable detection regardless of object color or surface

Programmable output functions

Synchronization capability for multiple sensors

Temperature compensation

Durable metal housing

IP65 protection suitable for industrial environments

Standard M30 mounting

Disadvantages

Slower detection speed compared to optical sensors

Large blind zone near the sensor (up to 80 mm)

May be sensitive to very soft or sound-absorbing surfaces