Products catalog

Home/Product Catalog/Security and Surveillance Systems | accessories/Video surveillance camera recording devices
  • New item   Network video recorder (NVR) | 8 channels | 8 PoE | 4K | 1 HDD up to 10 TB | H.265+ | AcuSense | Hikvision DS-7608NXI-K1/8P

    Network video recorder (NVR) | 8 channels | 8 PoE | 4K | 1 HDD up to 10 TB | H.265+ | AcuSense | Hikvision DS-7608NXI-K1/8P

    Code: DS-7608NXI-K1/8P
    Inquire about this item
    Price 322.19 € VAT incl.
    ( 266.27 € VAT excl. )
    Want another price? Suggest yours!

    Hikvision DS-7608NXI-K1/8P – an 8-channel AcuSense NVR with a built-in 8-port PoE switch. Cameras connect with a single cable for data and power, with a total PoE budget of up to 75 W.

  • Product description

    Network video recorder (NVR) | 8 channels | 8 PoE | 4K | 1 HDD up to 10 TB | H.265+ | AcuSense | Hikvision DS-7608NXI-K1/8P

    The Hikvision DS-7608NXI-K1/8P is an 8-channel network video recorder with 8 PoE ports. Each IP camera connects directly to the NVR with one UTP cable that carries both video and power.

    Key point:
    The built-in PoE switch saves a separate switch, power supplies and installation time – the system works on a plug-and-play basis. It is the best choice for a new site with 4–8 cameras where all cables run to one place. The total PoE budget is up to 75 W, so add up camera consumption, especially with IR or heaters.
    Channels
    8 IP, up to 12 MP
    PoE
    8 ports, up to 75 W
    Storage
    1 SATA up to 10 TB
    Outputs
    HDMI 4K + VGA

    Connectivity and integration

    • 8 PoE ports (IEEE 802.3af/at) – Cameras receive power and data over one cable; total power up to 75 W, port speed 10/100 Mbps.
    • RJ-45 LAN 10/100/1000 Mbps – A separate port for connecting the NVR to the router and for remote access.
    • Hik-Connect app – Live view, recordings and notifications on your phone (iOS / Android).
    • ONVIF Profile S/G and ISAPI – ONVIF cameras from other brands can be added; check the specific model's compatibility.
    • 4K HDMI and VGA – A monitor connects directly; HDMI up to 3840 × 2160 / 30 Hz, VGA up to 1920 × 1080 / 60 Hz.

    How it works

    Fit a SATA drive (up to 10 TB), connect cameras with CAT5e / CAT6 cables to the 8 PoE ports, the LAN port to the router and a monitor via HDMI or VGA.

    Hikvision cameras on the PoE ports are detected and activated automatically. The NVR records up to 8 streams (up to 80 Mbps total) in H.265+, and AcuSense filters motion into people and vehicles.

    The result is a tidy system with no extra power supplies at the cameras: one device in the cabinet, an archive on the drive and access from your phone.

    Why choose the DS-7608NXI-K1/8P?
    One device instead of an NVR, a PoE switch and 8 power supplies – fewer connections, fewer failure points and faster installation.

    Technical specifications

    Product type Network video recorder (NVR) with built-in PoE switch
    Manufacturer / model Hikvision / DS-7608NXI-K1/8P
    Channels 8 IP channels
    Max. recording resolution up to 12 MP per channel
    Incoming / outgoing bandwidth 80 Mbps / 80 Mbps
    Video compression H.265+ / H.265 / H.264+ / H.264
    Decoding (30 fps) AI on: 1 × 12 MP / 1 × 8 MP / 3 × 4 MP / 6 × 1080p; AI off: 1 × 12 MP / 2 × 8 MP / 4 × 4 MP / 8 × 1080p
    Playback 8-channel synchronous
    Video outputs 1 × HDMI up to 3840 × 2160 / 30 Hz; 1 × VGA up to 1920 × 1080 / 60 Hz; independent
    PoE 8 × RJ-45 10/100 Mbps, IEEE 802.3af/at, up to 75 W total
    Storage 1 SATA bay (3.5"), up to 10 TB; HDD not included
    Network 1 × RJ-45 10/100/1000 Mbps; up to 128 remote connections
    Audio 1 RCA output, two-way audio (RCA)
    USB 2 × USB 2.0 (front and rear)
    Protocols / API ONVIF (Profile S/G), ISAPI, SDK, Hik-Connect
    Power supply 48 VDC, 1.875 A; ≤ 10 W without HDD and PoE load
    Operating temperature -10…+55 °C, humidity 10–90 %
    Dimensions / weight 320 × 240 × 48 mm / ≤ 1 kg without HDD

    Key features

    • 8 PoE ports – camera power and data over one cable, no separate adapters.
    • Plug & Play – Hikvision cameras on the PoE ports connect automatically.
    • Motion Detection 2.0 – human and vehicle classification, fewer false notifications.
    • Perimeter protection and facial recognition – by the NVR; up to 16 face libraries and 20,000 pictures.
    • H.265+ – up to 75 % less storage required, according to the manufacturer.
    • Smart search and playback – find events by people or vehicles.

    How does it differ from similar models?

    • Hikvision DS-7608NXI-K1(D)/Alarm4+1 – 8 channels without PoE, but with alarm I/O 4/1 and a drive up to 16 TB; cheaper.
    • Hikvision DS-7604NXI-K1 – 4 channels without PoE, 40 Mbps – the cheapest Hikvision NVR in our range.
    • Hikvision DS-7616NXI-K1(D) – 16 channels without PoE, drive up to 16 TB – when you have more than 8 cameras.
    • IMOU NVR1108HS-W-S2 – 8-channel Wi-Fi NVR for homes; cameras connect wirelessly, no PoE and no AcuSense.

    Where is it used?

    • New-build private houses
    • Small shops and cafés
    • Car workshops and garages
    • Offices and clinics
    • Farm buildings and storerooms
    • Country homes with several outdoor cameras

    Use by need

    For a new home owner.
    All camera cables run to one NVR – no power sockets needed at the cameras under the eaves.
    For an electrician installing a first CCTV system.
    Plug & Play with Hikvision cameras – less configuration, fewer mistakes.
    For a café owner.
    Up to 8 cameras in the dining area, at the till and at the entrance – one device in the technical cabinet.

    Practical use

    If you are fitting 6 outdoor 4 MP cameras in a new house, connect each camera with one CAT6 cable (up to 100 m) to the PoE ports of the DS-7608NXI-K1/8P. Check that the 6 cameras' consumption (e.g. 6–7 W each) stays within the 75 W budget, fit a 4–6 TB drive – and the system runs without a single extra power supply.

    Pros

    • 8 built-in PoE ports (802.3af/at)
    • Cameras up to 12 MP, 4K HDMI
    • AcuSense: Motion Detection 2.0, perimeter, facial recognition
    • ONVIF Profile S/G – cameras from other brands too
    • Less equipment and fewer connections in the cabinet
    • Compact 1U chassis

    Cons / limitations

    • Total PoE budget up to 75 W: may not be enough for more powerful cameras (PTZ, with heaters).
    • Only 1 SATA bay, up to 10 TB; for a larger archive – DS-7616NXI-K1(D) (up to 16 TB).
    • No alarm I/O; if needed – DS-7608NXI-K1(D)/Alarm4+1.
    • PoE port speed is 10/100 Mbps (enough for cameras, not for other network devices).

    Safety and installation notes

    • Install the NVR in a dry, ventilated place – leave space for airflow in a cabinet or rack; operating temperature -10…+55 °C.
    • Fit the hard drive only with the power disconnected; choose surveillance-grade HDDs designed for 24/7 operation.
    • Power it from the source specified by the manufacturer (48 VDC, 1.875 A); a UPS and surge protection are recommended – a power cut also stops recording.
    • On first start-up set a strong admin password, enable Hik-Connect only if remote access is needed, and keep the firmware up to date.
    • GDPR: set the retention period to what you really need, restrict access with user rights and mark the monitored area with signs.
    • Use solid-copper CAT5e / CAT6 cable for PoE cameras (Ethernet limit – 100 m) and seal cable entries outdoors.

    Quick selection guide

    8 IP channels
    8 PoE up to 75 W
    1 HDD up to 10 TB
    4K HDMI
    Suitable when you need:
    • a new 4–8 camera system without a separate PoE switch
    • tidy installation with one cable per camera
    • AcuSense filtering on a small site
    Check before use:
    • total camera power – up to 75 W
    • cable length to each camera – up to 100 m
    • drive capacity for the required archive
    Important reminder: Built-in PoE does not replace a UPS – if 230 V power fails, both the NVR and all cameras go down.

    FAQ

    Do the cameras need separate power supplies?
    No, PoE cameras are powered through the NVR ports; total power up to 75 W.
    Which PoE standard is used?
    IEEE 802.3af/at – suits most IP cameras.
    What drive size can be fitted?
    One SATA drive up to 10 TB; the drive is not included.
    Does it work with other brands' cameras?
    Yes, via ONVIF Profile S/G; check the specific model's compatibility.
    What is the maximum cable length to a camera?
    The Ethernet limit is 100 m with CAT5e / CAT6 cable.
    How do I view video on my phone?
    Via the Hik-Connect app – live view, recordings and notifications.

    Hikvision DS-7608NXI-K1/8P – 8-channel AcuSense NVR with 8 PoE

    An 8-channel Hikvision NVR with 8 PoE ports (up to 75 W), cameras up to 12 MP, 4K HDMI, a drive up to 10 TB and AcuSense – one cable per camera is enough.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

    Wireless temperature and humidity sensor | white | ZigBee | SONOFF | SNZB-02 New item  
    Wireless temperature and humidity sensor | white | ZigBee | SONOFF | SNZB-02
    Code: SONOFF-SNZB-02
    Price 9.70 € VAT incl.
    ( 8.02 € VAT excl. )
    Add to cart 

  • Subscribtion to new arrivals

    privacy policy

    Information