Network video recorder (NVR) | 8 channels | 4K | 1 HDD up to 16 TB | H.265+ | AcuSense | Alarm 4/1 | Hikvision DS-7608NXI-K1(D)/Alarm4+1
Code: DS-7608NXI-K1(D)/Alarm4+1Price 215.33 € VAT incl.( 177.96 € VAT excl. )Hikvision DS-7608NXI-K1(D)/Alarm4+1 – an 8-channel AcuSense NVR with 4 alarm inputs and 1 relay output. It records cameras up to 12 MP, has 4K HDMI and one SATA bay for a drive up to 16 TB.
-
Network video recorder (NVR) | 8 channels | 4K | 1 HDD up to 16 TB | H.265+ | AcuSense | Alarm 4/1 | Hikvision DS-7608NXI-K1(D)/Alarm4+1
The Hikvision DS-7608NXI-K1(D)/Alarm4+1 is an 8-channel network video recorder for IP cameras. It is the same K-series AcuSense NVR, extended with alarm I/O: 4 inputs for sensors and 1 output for driving a siren, light or other device.
Key point:
The alarm inputs let you tie the video system to door contacts, PIR detectors or an alarm panel: when a sensor trips, the NVR starts recording, sends a notification and can switch on a siren or floodlight via the relay output. It suits sites where CCTV must work together with intruder alarms rather than separately.Channels
8 IP, up to 12 MPStorage
1 SATA up to 16 TBAlarm I/O
4 inputs / 1 outputConnectivity
RJ-45 1 Gbps, Hik-ConnectConnectivity and integration
- RJ-45 Ethernet 10/100/1000 Mbps – Cameras connect via the local network or a separate PoE switch; the same port is used for remote access.
- Hik-Connect app – Live view, playback and notifications on your phone via the Hik-Connect service (iOS / Android).
- ONVIF Profile S/G and ISAPI – ONVIF cameras from other brands can be added; check compatibility with the specific model before buying.
- Alarm I/O 4/1 – Sensors and the relay output connect directly to the NVR – an event can trigger recording, a notification or an external device.
- 4K HDMI and VGA – A monitor connects directly to the NVR; HDMI up to 3840 × 2160 / 30 Hz, VGA up to 1920 × 1080 / 60 Hz, independent outputs.
How it works
Fit a SATA drive (up to 16 TB), connect the NVR to the network switch serving the IP cameras and to a monitor via HDMI or VGA. Wire sensor contacts to the alarm inputs and a siren or relay to the output.
The NVR records up to 8 cameras continuously or on events in H.265+. AcuSense separates people and vehicles from other motion, and a triggered alarm input can start recording and activate the output.
The result is video and events in one system: your phone receives a notification with the clip, while a siren or lighting switches on at the site.
Why choose the DS-7608NXI-K1(D)/Alarm4+1?
A single 1U chassis combines 8-channel AcuSense recording with simple alarm logic – no extra module is needed for a door contact to trigger recording or a siren.Technical specifications
Product type Network video recorder (NVR) for IP cameras with alarm I/O Manufacturer / model Hikvision / DS-7608NXI-K1(D)/Alarm4+1 Channels 8 IP channels Max. recording resolution up to 12 MP per channel Incoming / outgoing bandwidth 80 Mbps / 80 Mbps Video compression H.265+ / H.265 / H.264+ / H.264 Decoding (30 fps) AI on: 2 × 12 MP / 3 × 8 MP / 6 × 4 MP / 12 × 1080p; AI off: 2 × 12 MP / 4 × 8 MP / 8 × 4 MP / 16 × 1080p Playback 8-channel synchronous Video outputs 1 × HDMI up to 3840 × 2160 / 30 Hz; 1 × VGA up to 1920 × 1080 / 60 Hz; independent Storage 1 SATA bay, up to 16 TB; HDD not included Network 1 × RJ-45 10/100/1000 Mbps; up to 128 remote connections Alarm I/O 4 inputs / 1 output Audio 1 RCA input, 1 RCA output, two-way audio USB 2 × USB 2.0 (front and rear) Protocols / API ONVIF (Profile S/G), ISAPI, SDK, RTSP, Hik-Connect Power supply 12 VDC, 1.5 A; ≤ 10 W without HDD Operating temperature -10…+55 °C, humidity 10–90 % Dimensions / weight 320 × 240 × 48 mm / ≤ 1 kg without HDD Key features
- Motion Detection 2.0 – human and vehicle classification on all channels, fewer false alerts from trees or shadows.
- Perimeter protection – line crossing and intrusion: 1 channel (4 MP) by the NVR, all channels with AcuSense cameras.
- Facial recognition – 1-ch 8 MP video stream or 2-ch face pictures, up to 16 libraries and 20,000 pictures.
- Alarm inputs / output – 4 sensors trigger recording or notifications, 1 relay drives a siren or light.
- H.265+ – according to the manufacturer, reduces required storage by up to 75 %.
- Smart search and playback – find recordings by events instead of watching hours of footage.
- TLS stream encryption – more secure video transmission over the network.
How does it differ from similar models?
- Hikvision DS-7608NXI-K1/8P – same 8 channels, but with 8 PoE ports (up to 75 W) to power cameras; no alarm I/O on this model; more expensive.
- Hikvision DS-7604NXI-K1 – 4 channels, 40 Mbps, drive up to 10 TB – a cheaper option for a smaller site.
- Hikvision DS-7616NXI-K1(D) – 16 channels, 160 Mbps, no alarm I/O – when you have more than 8 cameras.
- IMOU NVR1108HS-W-S2 – 8-channel Wi-Fi NVR for homes with the IMOU Life app; no AcuSense and no alarm inputs.
Where is it used?
- Car workshops and garages with door contacts
- Warehouses and farm buildings
- Shops that need a siren after hours
- Offices with an existing alarm panel
- Detached houses and country homes with PIR sensors
- Garage cooperatives and car parks
Use by need
For a car workshop owner.
If the gate is opened after hours, the door contact starts recording and a phone notification, and the relay switches on a siren.For a security installer.
Combines video recording and simple alarm logic in one device, with no extra I/O module.For a farmer or warehouse manager.
A PIR sensor at a remote door activates a specific camera's recording and a floodlight.Practical use
If someone opens the workshop gate after closing time, a magnetic contact wired to an alarm input immediately starts recording from the camera above the gate, the Hik-Connect app sends a notification and the relay output switches on a siren. Recordings are stored on a drive of up to 16 TB, so the archive is kept for weeks.Pros
- 4 alarm inputs and 1 output – no extra module
- AcuSense: human/vehicle classification, perimeter protection, facial recognition
- Cameras up to 12 MP, 4K HDMI output
- Drive up to 16 TB, H.265+ saves space
- ONVIF Profile S/G – cameras from other brands too
- Compact 1U chassis, ≤ 10 W without HDD
Cons / limitations
- No PoE ports – cameras need a separate PoE switch or power supplies; alternative – DS-7608NXI-K1/8P.
- Only 1 SATA bay – no drive redundancy.
- Perimeter protection by the NVR – 1 channel only; AcuSense cameras are needed for all channels.
- HDD not included – buy separately.
Safety and installation notes
- Install the NVR in a dry, ventilated place – leave space for airflow in a cabinet or rack; operating temperature -10…+55 °C.
- Fit the hard drive only with the power disconnected; choose surveillance-grade HDDs designed for 24/7 operation.
- Power it from the source specified by the manufacturer (12 VDC, 1.5 A); a UPS and surge protection are recommended – a power cut also stops recording.
- On first start-up set a strong admin password, enable Hik-Connect only if remote access is needed, and keep the firmware up to date.
- GDPR: set the retention period to what you really need, restrict access with user rights and mark the monitored area with signs.
- Run alarm wiring separately from 230 V cables; check the relay output load against the manufacturer's manual – use an interposing relay for a more powerful siren.
Quick selection guide
8 IP channels1 HDD up to 16 TBAlarm I/O 4/14K HDMISuitable when you need:- up to 8 IP cameras with local recording
- linking video to door or PIR sensors
- AcuSense filtering to reduce false alerts
Check before use:- whether you have a PoE switch or power supplies for the cameras
- what drive size you need for the number of cameras and retention time
- sensor type (NO / NC) and siren current
Important reminder: An NVR with alarm inputs does not replace a certified intruder alarm panel connected to a monitoring centre – it adds video and event logic.FAQ
Does the NVR power cameras via PoE?
No, this model has no PoE ports – cameras need a PoE switch or separate power.What drive size can be fitted?
One SATA drive up to 16 TB; the drive is not included.What are the 4 alarm inputs for?
Door contacts, PIR sensors or alarm panel outputs that trigger recording or notifications.Does it work with other brands' cameras?
Yes, the NVR supports ONVIF Profile S/G; check the specific model's compatibility before buying.How do I view video on my phone?
Via the Hik-Connect app – live view, recordings and notifications.What resolution is shown on the monitor?
HDMI output up to 4K (3840 × 2160 / 30 Hz), VGA up to 1920 × 1080.Hikvision DS-7608NXI-K1(D)/Alarm4+1 – 8-channel AcuSense NVR with alarm I/O
An 8-channel Hikvision NVR for cameras up to 12 MP with 4 alarm inputs and 1 output, 4K HDMI, a drive up to 16 TB and AcuSense filtering – video and events in one system.
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThis product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Wireless temperature and humidity sensor | white | ZigBee | SONOFF | SNZB-02Code: SONOFF-SNZB-02SONOFF SNZB-02 is a compact wireless Zigbee temperature and humidity sensor (43 × 43 × 14 mm). Data is visible in the eWeLink app and is used for heating, ventilation and dehumidification scenes. Zigbee hub required, CR2450 battery.
Price 9.70 € VAT incl.( 8.02 € VAT excl. )








