Window sealing kit | for portable air conditioner connection | for sliding window | D150mm | 1600x250mm | white

Window sealing kit | for portable air conditioner connection | for Ø150 mm hose | polyester | white

Window sealing kit designed for routing a portable air conditioner's Ø150 mm / 15 cm hot air exhaust hose through a window and covering the remaining open gap. The flexible polyester material is attached to the window frame using adhesive hook-and-loop tape, while the hose opening is tightened with a drawstring and can be additionally secured using the fastening straps included in the set.

This is a flexible window sealing solution for a portable air conditioner with a Ø150 mm exhaust hose. The seal allows the hose to be routed through a suitable partially opened window while covering the remaining part of the window opening, so that no large open gap remains around the hose.

It covers most of the open window area around the air conditioner exhaust hose. This allows the hose to be routed outdoors without leaving the entire window opening exposed.

• Made of polyester.
• White colour.
• Flexible construction adapts to the window frame.
• Designed for a Ø150 mm / 15 cm exhaust hose.
• Attached using adhesive hook-and-loop tape.
• The hose opening is tightened with a drawstring.
• Includes 2 additional fastening straps.

The seal is intended for windows where the sash slides horizontally or vertically:

• Horizontally sliding windows.
• Vertically sliding windows.
• Single-hung vertical windows.
• Double-hung vertical windows.

This seal is not intended for windows whose sash opens inward or outward.

• Inward-opening windows.
• Outward-opening windows.
• Casement windows.
• Tilt / tilt-and-turn windows.
• Roof windows.

The Ø150 mm exhaust hose is routed through the designated fabric opening. After inserting the hose, the opening is tightened with a drawstring so that the seal fits as closely as possible around the hose. Two fastening straps are included for additional securing.

• Window sealing fabric – 1 pc.
• Adhesive hook-and-loop tape – 6 m.
• Fastening straps – 2 pcs.

• Portable air conditioner.
• Exhaust hose / duct.

1. Clean and thoroughly dry the window frame.
2. Cut the required length of hook-and-loop tape.
3. Attach the adhesive hook-and-loop tape to the window frame.
4. Attach the sealing fabric to the tape.
5. Bring your existing Ø150 mm air conditioner hose to the window.
6. Route the hose through the opening in the sealing fabric.
7. Tighten the drawstring around the hose.
8. If necessary, additionally secure the hose using one of the fastening straps included in the set.

• Designed for connecting a portable air conditioner through a window.
• Suitable for a Ø150 mm / 15 cm exhaust hose.
• Covers the open window gap around the hose.
• Flexible polyester construction.
• Attached using adhesive hook-and-loop tape.
• The hose opening is tightened with a drawstring.
• Includes 2 additional fastening straps.
• Exhaust hose is not included.

• With portable air conditioners.
• With a Ø150 mm / 15 cm exhaust hose.
• In residential rooms.
• In bedrooms.
• In living rooms.
• In offices.
• In rooms where the air conditioner exhaust hose is routed through a suitable type of window.

• Before installation, check that the exhaust hose diameter is Ø150 mm / 15 cm.
• Check your window opening type.
• The window frame must be clean and dry before applying the hook-and-loop tape.
• Tighten the hose opening so that as little free space as possible remains around the hose.
• Do not compress or sharply bend the air conditioner exhaust hose.
• The exhaust hose / duct must be purchased or used separately.

Window sealing kit | for portable air conditioner connection | for Ø150 mm hose

White polyester window sealing kit designed for a portable air conditioner's Ø150 mm / 15 cm exhaust hose. The set includes sealing fabric, 6 m of adhesive hook-and-loop tape and 2 fastening straps. The exhaust hose / duct is not included.