Wireless RF remote control with receiver | 433MHz | 230V | 4 channels | 4 remotes | for garage doors | for door locks

Wireless RF remote control kit with receiver – 433MHz, 230V, 4-channel, 4 remotes, for garage doors and door locks

Wireless RF remote control kit with receiver is designed for convenient control of garage doors, door locks, externally mounted chain motors and other compatible devices. The kit operates at a 433MHz frequency, includes a 4-channel receiver, 4 remote controls and is designed for use with a 230V receiver.

• Wireless 433MHz control – allows convenient remote control of gates, locks or automation.
• 4-channel receiver – provides the possibility to control several functions or different devices, depending on the connection.
• 4 remotes included – convenient for use by a family, employees or several users.
• Operating distance up to 50 m – allows the device to be controlled from a convenient distance when environmental conditions allow a stable signal.
• 230V receiver – designed for systems where 230V voltage is used to power the receiver.
• Compact remotes – convenient to carry in a pocket, car or bag.
• Easy pairing – the learning-code principle makes it easier to assign remotes to the receiver.
• Suitable for chain motors – can be used with externally mounted chain motors if their control circuit is compatible.

• For garage doors – for convenient remote opening and closing of doors.
• For door locks – for wireless control of electronic locks or access systems.
• For externally mounted chain motors – for motor control when remote RF control is required.
• In offices and commercial premises – for several users to control doors, gates or technical devices.
• In workshops and utility rooms – for gates, small gates, locks or automation units.
• In households – for garages, yard gates or additional control points.

For household users: suitable for controlling garage doors, yard gates, door locks or other compatible devices. 4 remotes allow several family members to use the system conveniently.

For electricians: a convenient kit when a simple 433MHz wireless control solution needs to be installed for garage doors, door locks, chain motors or other automation. The wiring diagram of the receiver and the controlled system must be checked.

For automation specialists: the 4-channel receiver provides the possibility to adapt several control functions, for example opening, closing, stopping or another system command, if the logic of the controlled equipment allows it.

For offices and commercial premises: remotes can be assigned to several employees for more convenient control of electronic locks, gates or access systems.

For example, in a garage door or externally mounted chain motor, the receiver is connected to a compatible control circuit. When the user presses a button on the remote, a command is transmitted to the receiver, and the receiver activates the door or motor control.

Since the kit includes 4 remotes, one can be kept in the car, another at home, and the remaining ones can be given to family members, employees or technical personnel. This allows several users to conveniently use the same control system.

The remote control receiver is an electrical device, so it must be connected according to the diagram of the specific system and electrical safety requirements. Before use, it is necessary to test whether all commands operate correctly and whether the controlled device stops and moves as intended.

• Installation and connection must be carried out by a qualified electrician or automation specialist.
• Before installation, the power supply must be disconnected and it must be checked that there is no voltage in the system.
• The receiver connection must match the diagram of the controlled device – garage door, lock, chain motor or other automation.
• Before operation, all remotes and all used channels must be tested.
• If the system controls gates or a moving mechanism, it must be ensured that there are no people or obstacles in the movement area.
• It is recommended to install the receiver in a protected location so that it is not exposed to direct rain, snow, condensation or mechanical damage.
• Do not use the remotes if the housing is damaged or the buttons operate unreliably.

Quick selection guide

Choose the wireless RF 433MHz remote control kit with 4 remotes when you need a simple and convenient solution for controlling garage doors, door locks, chain motors or other compatible automation for several users.

Simple wireless control for garage doors, locks and chain motors

The wireless RF 433MHz remote control kit with a 4-channel receiver and 4 remotes is a practical solution for controlling garage doors, door locks, externally mounted chain motors and other compatible automation.

Thanks to the 4 remotes included, 4-channel receiver, operating distance up to 50 m, compact remotes and simple use, this kit can be conveniently applied in homes, offices, workshops or commercial premises. Before installation, the controlled device diagram, receiver power supply and safety requirements must be checked.