Worktop Socket Block | flip-up | 1× Schuko | USB-A + USB-C | 5 W wireless charger | 1.5 m cable | 3500 W | IP20 | black | Elsp-1-02-PAVAS1BP-EA

Code: Elsp-1-02-PAVAS1BP-EA

Barcode: 5902801355349

Inquire about this item

Add to compareRemove from comparison Compare goods (0)

Add to wishlist

Price 79.16 € VAT incl.
( 65.42 € VAT excl. )

Add to cart

Recessed flip-up worktop block: 1× earthed Schuko socket, USB-A, USB-C and a 5 W wireless charger. Max. load 3500 W, IP20, 1.5 m cable.

Product description

Worktop Socket Block | flip-up | 1× Schuko | USB-A + USB-C | 5 W wireless charger | 1.5 m cable | 3500 W | IP20 | black | Elsp-1-02-PAVAS1BP-EA

A recessed worktop socket block that combines three ways to charge in one place: an earthed Schuko socket for 230 V devices, USB-A and USB-C ports for wired charging, and a 5 W wireless charger for your phone. When not in use, the socket module closes flush with the desk surface – no cables and no exposed sockets left on the desk.

The key idea:
An extension lead under the desk and three separate chargers make for a tangle of connections that can be avoided at the furniture manufacturing or installation stage. One neatly recessed block powers the workstation – laptop, monitor or lamp – while the phone simply charges when placed on the marked surface.

⚡ Kibirkštis: Fazė, why cut into the desk when you can just tuck an extension lead underneath it?

⚙ Fazė: Because under the desk it ends up on the floor, gets kicked by feet, and cables hang over the edge of the worktop every single day. A recessed block is one solution for the whole life of the furniture: sockets at hand when you need them, out of sight when you don't.

Sockets
1× Schuko + USB-A + USB-C

Wireless charging
5 W, inductive

Max. load
3500 W, 220–240 V AC

Installation
recessed into the worktop, IP20

How it works

The rectangular housing is inserted into a cut-out in the worktop and rests on its upper frame – only a thin aluminium cover remains above the surface. Power is supplied by a 1.5 m cable running from under the desk to the nearest earthed 230 V socket.

Press the cover and the socket module flips up, revealing the Schuko socket and the USB ports. When you finish working, the module is lowered back down – the sockets are hidden and no dust, crumbs or paper clips can fall into them. The wireless charger next to it keeps working with the module closed.

The result is a single tidy power point at the workstation: the computer and other 230 V devices plug into the Schuko socket, headphones or a tablet into USB-A or USB-C, and the phone charges wirelessly.

What is the benefit of this block?
It replaces an extension lead, a USB adapter and a wireless charging pad with a single unit that is invisible when not in use and takes up no space on the desk.

Technical specifications

Product type	Recessed flip-up worktop socket block
Manufacturer	Elsp Group
Code	Elsp-1-02-PAVAS1BP-EA
Socket outlets	1× Schuko (type F) with earthing contacts
USB ports	1× USB-A, 1× USB-C
Wireless charger	Inductive, 5 W
Supply voltage	220–240 V AC, 50–60 Hz
Maximum permissible load	3500 W
Protection class (electric shock)	Class I (an earthed supply socket is required)
Ingress protection	IP20
Power cable length	1.5 m
Frame dimensions	240 × 119 mm
Body dimensions (below worktop)	210 × 109 mm
Body height	72 mm
Material	Aluminium, plastic
Colour	Black
Marking	CE

Key features

Flip-up socket module – unused sockets stay hidden, keeping the desk surface flat and clean.
Earthed Schuko socket – suitable for a laptop power supply, monitor, desk lamp and other 230 V devices.
USB-A and USB-C in one module – charges both older and newer devices without a separate USB adapter.
5 W wireless charger – a phone that supports wireless charging charges when placed on the marked surface, even with the socket module closed.
Up to 3500 W load – sufficient for typical office or home workstation equipment.
Aluminium and plastic housing, black – matches dark worktops and modern furniture.
1.5 m power cable – the block plugs into an existing socket; no additional electrical installation is needed.

Where is it used?

Office desks and height-adjustable desks
Home office – writing desk, computer desk
Meeting and conference room tables
Hotel room desks and bedside tables
Shop, showroom and reception counters
Workstations in universities, libraries and training rooms
Living room furniture – coffee tables, sideboards, TV units

Choosing by need

For furniture manufacturers.
One component instead of three – the desk is sold with built-in power and wireless charging.

For office fit-out contractors.
Tidy workstations with no extension leads on the floor and no cables running across the desk.

For home office owners.
Computer, lamp and phone all charge from one spot, and after work the desk looks like a piece of furniture again.

Practical use

If staff bring laptops and phones to the meeting room and an extension lead with chargers sprawls across the middle of the table, a block recessed into the worktop solves the problem: the laptop plugs into the Schuko socket, the phone goes on the wireless charger, and after the meeting the socket module is closed and the table is clear.

Pros

Three ways to charge in one block
Sockets are hidden when not in use
Wireless charging works with the module closed
USB-C port for newer devices
Plug-in connection – no changes to the electrical installation
Aluminium cover, durable for everyday use

Cons / limitations

Only one 230 V socket – more devices require a multi-socket block
5 W wireless charging is slower than fast wired charging – choose USB-C when in a hurry
IP20 – not for damp locations or the kitchen area near a sink
A cut-out in the worktop is required – relocating it later is difficult

Installation and safety notes

Before cutting the worktop, check the cut-out dimensions against the supplied instructions and make sure there are no drawers, frames or cross rails underneath.
The block is protection class I – connect it only to an earthed 230 V socket. Earthing is required for both the Schuko socket and the metal housing.
The total load must not exceed 3500 W – do not connect heaters, kettles or other high-power appliances through additional extension leads.
IP20 – for use in dry rooms only; do not leave drinks on the block and do not clean it with a damp cloth while it is connected to the mains.
Do not place metal objects, bank cards or keys on the wireless charger – they may heat up or be damaged.
Do not run the power cable over sharp edges and do not trap it with drawers or the height-adjustment mechanism of a sit-stand desk.

⚡ Fazė's tip:
Before cutting the cut-out, place the block on the desk and try out where your hand naturally reaches while you work. The most common mistake is recessing the block too close to the edge, where a monitor stand gets in the way, or over the desk frame, where there is no room left for the housing underneath.

Quick selection guide

1× Schuko

USB-A + USB-C

Wireless 5 W

3500 W | IP20

Suitable when you need:

power and phone charging for a single workstation, built into the worktop
hidden sockets that are out of sight when not in use
a USB-C port without a separate adapter

Check before use:

that your phone supports wireless (inductive) charging
that there is enough free space under the worktop for the housing
that an earthed 230 V socket is within 1.5 m

Important reminder: this block is not intended for kitchen work areas or damp rooms, and it does not replace fixed installation sockets for high-power household appliances.

FAQ – Kibirkštis asks, Fazė answers

⚡ Kibirkštis: Does the wireless charger work with the socket module closed?
⚙ Fazė: Yes, the wireless charger sits next to the socket module and works whether or not the module is flipped up.

⚡ Kibirkštis: Can I connect a laptop and a monitor to the Schuko socket at the same time?
⚙ Fazė: Yes, using a splitter, provided the total power of all devices does not exceed 3500 W.

⚡ Kibirkštis: Does the block need to be wired into the electrical installation?
⚙ Fazė: No, the block has a 1.5 m power cable and plugs into an existing earthed 230 V socket.

⚡ Kibirkštis: Is it suitable for a kitchen worktop?
⚙ Fazė: Only in a dry area away from the sink and hob – the block is IP20, so it is not protected against water.

Worktop Socket Block with USB-A, USB-C and Wireless Charger

A flip-up socket block recessed into the worktop, with 1× Schuko socket, USB-A and USB-C ports and a 5 W wireless phone charger – a tidy power point for office, home and hotel workstations. Max. load 3500 W, IP20, 1.5 m cable, black.

Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

Attributes

Manufacturer

Elsp Group

CE certificate – a guarantee of safety, quality, and compliance

This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.

CE certification means that the product has been evaluated according to the main criteria:

Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purpose

CE marking allows this product to:

be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environments

The CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.

What does this mean for you as a buyer?

Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions

Customer reviews

Love it? Share your thoughts in a review!

Write Review

Alternative products

Protective flexible spiral cable wrap for wires and cables | Ø20 mm | 2.5 m | Brennenstuhl Spiralschlauch | 1164360 | 4007123562381

Code: 1164360

Flexible and easy-to-install protective spiral sleeve for wires and cables, designed for neat cable grouping and protection against tangling, mechanical abrasion, and messy cable placement in work or home environments.

This Ø20 mm, 2.5 m long cable protection sleeve is especially suitable where several cables are used in one place: near a computer desk, TV area, office equipment, workshop equipment, electrical appliances, or temporary cable management systems. The spiral design allows cables to be conveniently wrapped without dismantling the existing installation – the sleeve can be wound directly onto already connected cables.

Price 9.68 € VAT incl.

( 8.00 € VAT excl. )

Add to cart

Installation cable trunking | self-adhesive | cuttable | 10x10mm | 5m | white | Rosi | 71501-A | 8050040701933

Code: 71501-A

Installation cable trunking designed to neatly hide and protect wires at home, in the office, workplace, or commercial premises. Thanks to its compact 10x10 mm size, the trunking is suitable for thin wires, internet cables, TV, modem, computer, LED lighting, or other low-voltage device cables.

The trunking is supplied in a 5-meter roll, so it can be easily cut to the required length. The white design allows the trunking to be discreetly matched with walls, skirting boards, furniture, or other light-colored surfaces.

Price 24.99 € VAT incl.

( 20.65 € VAT excl. )

Add to cart