Y-shaped flexible current sensing coil | Rogowski coil | 3000 A | Ø150 mm | 85 mV/kA | Y-FCT-510

Technical Specifications

Type: Flexible current measuring coil (Rogowski coil), Y-shaped
Model: Y-FCT-510
Coil length: 510 mm
Inner window size: 150 mm
Cross-section: 8 mm (slim design)
Rated current: 3000 A (AC)
Output signal: 85 mV/kA @ 50 Hz
Cable length: 2 meters
Calibration accuracy: ±0.5 %
Temperature drift: 300 ppm/°C
Linearity: ±0.2 % (from 2 % to 100 % of rated current)
Position error: ±1 %
Wire marking: Black / Red (for correct polarity direction) 

Functions

Non-invasive AC current measurement – no need to disconnect cables

Y-shaped output – cleaner and more convenient cable routing

Slim and flexible coil – suitable for limited installation spaces

Stable and accurate measurements across the full operating current range

Low position and phase influence on measurement results

Applications

Home / advanced user:
Monitoring energy consumption in residential or commercial buildings, analysis of loads in solar power systems, inverters, EV charging lines, safe measurements without disconnecting wiring

Electrician:
Fast installation in electrical panels, fewer components – simpler installation, convenient solution for system renovation or expansion

Engineer / automation specialist:
Direct integration with energy meters, PLC, BMS, EMS, SCADA systems, high-current measurement without magnetic core saturation, reliable solution for industrial and infrastructure projects

Advantages

Y-shaped design – easier installation

Slim (8 mm) and flexible coil

High accuracy and good linearity

Safe, non-invasive measurement

Suitable for tight electrical panel spaces

Limitations

Designed for alternating current (AC) only

Requires a compatible measuring device with 85 mV/kA input

IP protection rating not specified – recommended for indoor use or installation in a protective enclosure