Products catalog

Home/Product Catalog/Electrical distribution and installation/Electrical installation components/Vintage | Retro Style Electrical Installation Components/Switches | intermediate switches | two-way switches | surface-mounted | plastic | retro style
  •   2-gang switch 10A | 230V | surface-mounted | plastic | retro style | white
      2-gang switch 10A | 230V | surface-mounted | plastic | retro style | white 1
      2-gang switch 10A | 230V | surface-mounted | plastic | retro style | white 2

    2-gang switch 10A | 230V | surface-mounted | plastic | retro style | white

    Code: SM-01-53
    Inquire about this item
    Price 4.90 € VAT incl.
    ( 4.05 € VAT excl. )
    Want another price? Suggest yours!
    2-gang retro-style switch designed for manual control of lighting or other 230 V electrical circuits. This is a surface-mounted, white plastic switch, suitable for installation on a wall or other surface when you want to maintain a classic, vintage-style electrical installation look. Due to its 6-contact construction, it can be used for various 2-gang wiring schemes, provided they match the contact logic of the specific switch. 
  • Product description

    Retro-style 2-gang switch – 10A, 230V, surface-mounted, plastic, white

    2-gang retro-style switch designed for manual control of lighting or other 230 V electrical circuits. This is a surface-mounted, white plastic switch, suitable for installation on a wall or other surface when you want to maintain a classic, vintage-style electrical installation look. Due to its 6-contact construction, it can be used for various 2-gang wiring schemes, provided they match the contact logic of the specific switch.

    Main concept:
    This switch is intended for controlling two separate lighting zones or two electrical circuits where surface mounting and a retro design are required. The white PVC housing fits well with classic, decorative, or exposed installation solutions.
    Gang
    2-gang
    Current
    10 A
    Contacts
    6 contacts
    Mounting
    Surface-mounted

    Working principle

    The 2-gang switch allows for independent control of two electrical circuits or lighting zones. Each rocker can be used to switch a separate light fixture, a group of fixtures, or another compatible 230 V load on and off, provided the load does not exceed the switch's nominal parameters.

    The surface-mounted type means the switch is installed onto a surface and does not need to be recessed into the wall. This is convenient for retro, exposed installation, renovation, or technical areas where wires are routed on the surface or through decorative conduits.

    What are the benefits of a 2-gang switch?
    A 2-gang switch allows you to control two separate lighting zones from one location. For example, one rocker can control the main ceiling light, while the other controls supplementary lighting, wall lamps, outdoor lights, or another separate circuit.

    Technical parameters

    Product type 2-gang switch
    Switch type Surface-mounted, retro-style
    Number of gangs 2 gangs
    Number of contacts 6 contacts
    Nominal current 10 A
    Nominal voltage 230 V
    Material PVC
    Body material Plastic housing
    Color White
    Dimensions 5.8 x 2.5 cm
    Mounting type Surface-mounted
    Style Retro-style
    Purpose Control of lighting or compatible 230 V electrical circuits
    Usage location Residential premises, farmhouses, workshops, outbuildings, retro-style installations

    Where is it used?

    • In residential premises – for controlling two lighting zones in one place.
    • In farmhouses and wooden homes – when you want to maintain a retro or classic installation look.
    • In outbuildings and workshops – for simple control of two electrical circuits.
    • In exposed installations – when the switch is mounted on the surface and wires are routed externally.
    • In renovation projects – when you do not want to or cannot recess the switch into the wall.

    Practical installation example

    For example, the switch is mounted on the wall in a farmhouse, wooden home, workshop, or retro-style room. One rocker can control the main ceiling light, while the other controls an additional wall lamp, outdoor lighting, or another separate lighting circuit.

    Surface mounting allows the switch to be fastened directly onto the surface, making it suitable for exposed installation solutions where wires are routed on the surface or using decorative retro-style cabling.

    Pros

    • 2 rockers – allows control of two separate lighting zones or circuits.
    • 6-contact construction – provides more connection options based on specific schemes.
    • Surface-mounted – no need to recess into the wall.
    • Retro-style design – suitable for classic, decorative, and exposed installation environments.
    • White PVC housing – neutral look, easily combined with light walls and interior.
    • 10 A nominal current – suitable for most common lighting circuits.
    • Compact dimensions – 5.8 x 2.5 cm size allows mounting even in smaller spaces.

    Cons / limitations

    • 10 A current limit – not suitable for heavier loads exceeding the nominal current.
    • Plastic housing – may be less resistant to mechanical impact than metal solutions.
    • Surface mounting is visible – not suitable if a completely hidden flush solution is required.
    • Need to check contact scheme – the 6-contact switch connection must be made according to the specific scheme.
    • IP protection not specified – recommended for use in dry indoor premises or according to manufacturer-specified conditions.

    Safety and installation notes

    The switch is an electrical installation component; therefore, before installation, it is necessary to assess the controlled load, cable wiring, contact scheme, installation location, and electrical safety requirements.

    • Installation must be performed by a qualified electrician in compliance with applicable electrical safety regulations.
    • Do not exceed the 10 A nominal current – excessive load can damage contacts or cause overheating.
    • Before connection, it is necessary to check the 6-contact switch scheme and ensure it matches the specific installation.
    • Use only with compatible 230 V circuits – the switch must be selected according to the load type and power.
    • For damp or outdoor locations, it is necessary to choose a switch with an appropriate IP protection class if not specified for this model.

    Quick selection guide

    Retro-style 2-gang switch 10A 230V – a suitable choice when you need a surface-mounted switch to control two lighting zones or two electrical circuits. The white PVC housing and retro design fit well in farmhouses, wooden homes, workshops, exposed installations, and decorative electrical solutions.

    Gangs
    2 gangs
    Current
    10 A
    Contacts
    6 contacts
    Mounting
    Surface-mounted
    Suitable when you need:
    • to control two lighting zones with one switch;
    • to mount the switch onto a wall surface;
    • to install a retro-style electrical system;
    • to use a white plastic switch in a classic environment;
    • to have a 6-contact switch according to a specific wiring scheme.
    Check before installation:
    • is the controlled load within 10 A;
    • is a 2-gang switch required;
    • does the 6-contact scheme match your wiring;
    • is a surface-mounted switch suitable for the location;
    • is the environment dry and suitable for a switch without specified IP protection.
    Important reminder:
    This switch is intended for 230 V electrical circuits up to 10 A. Connection must be performed according to the specific contact scheme, and for heavier loads or damp locations, a switch adapted for those conditions should be chosen.

    FAQ – Frequently Asked Questions

    What is this 2-gang switch for?
    It is for manual control of two lighting zones or two compatible 230 V electrical circuits.
    Is this a surface-mounted switch?
    Yes, this is a surface-mounted switch installed on a wall or other surface.
    What is the switch's nominal current?
    The switch's nominal current is 10 A.
    What is the switch's voltage?
    The switch is intended for 230 V electrical circuits.
    What do 6 contacts mean?
    6 contacts mean the switch has more connection points that can be used based on the specific switch contact scheme. Check the scheme before connecting.
    Is this switch suitable for retro installation?
    Yes, the switch is retro-style and surface-mounted, making it suitable for decorative, classic, or exposed electrical installations.
    Can it be used outdoors?
    If an IP protection class is not specified, it is recommended to use the switch in dry indoor premises. For outdoors or damp areas, you need to choose a switch with appropriate IP protection.

    Retro-style solution for controlling two lighting zones

    The 2-gang surface-mounted switch allows convenient control of two separate 230 V electrical circuits while maintaining a classic retro look for your electrical installation.

    With its white PVC housing, compact dimensions, 10 A nominal current, and 6-contact construction, this switch is a practical choice for farmhouses, residential premises, workshops, and exposed installation solutions.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • privacy policy

    Information