
2-pin crimp connector with silicone gel filling | hermetic | 0.4–0.7 mm²
Code: 1-66736Price 0.13 € VAT incl.( 0.11 € VAT excl. )Piercing insulation displacement connector designed for safe and reliable connection of low-current wires. The connector is filled with a silicone-based sealing compound that effectively protects contacts from moisture, corrosion, and other environmental factors. Ideal for quick, tool-free installation in low-current applications – signal, communication, and low-voltage systems.
-
Technical Specifications:
Wire cross-section: 0.4 – 0.7 mm² (21–26 AWG)
Maximum wire diameter: ~1.52 mm
Filling: Silicone-based gel (sealing)
Protection: Resistant to moisture, corrosion, dust
Installation method: Crimping without stripping insulation
Application: Indoors and limited outdoor environments
Mounting: Manual – no special tools required
Features:
Pierces insulation and connects wires in one action
Ensures reliable contact even with very thin wires
Sealing protects the connection from environmental factors
Fast, tool-free installation
Usage:
Low-current installations
Communication networks (phones, alarms, data lines)
LED lighting wire connections
Telecommunication systems
Automation and control signal lines
Suitable for indoor and protected outdoor use
Pros:
Sealing silicone filler provides moisture resistance
No need to strip insulation – fast installation
Suitable for small cross-section wires (21–26 AWG)
Crimped without special tools
Reliable contact – long-lasting and safe solution
Cons:
Not suitable for large cross-section wires
Single-use – cannot be reconnected
Only for low voltage or signal circuits (not suitable for high current)
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Terminal | connector paste for contacts | reduces oxidation | 35.3g | WAGO | ALU PLUS | 249-130 | for connecting aluminium and copper wiresCode: 4017332133890Contact paste designed to protect aluminum conductors from oxidation and ensure a reliable electrical connection. This special paste allows aluminum and copper conductors to be safely and efficiently connected within the same connector, making it particularly useful when renovating older electrical installations where aluminum wiring is commonly found.
Aluminum naturally oxidizes, and the resulting oxide layer increases contact resistance, causes connection heating, and may become a source of electrical faults. By using WAGO ALU-PLUS, the oxidation layer is reduced, electrical conductivity is improved, and the service life of the connection is significantly extended.
Price 2.83 € VAT incl.( 2.34 € VAT excl. )Terminal block | electrical wire connector | spring clamp | lever-operated | 3x0.08-2.5mm² | max. 4mm² | WAGO | 222-413 | 4017332955676Code: 4017332955676Installation spring terminal connector with foldable levers, designed for fast, reliable and tidy electrical wire connection without screws or additional tools. This terminal block is especially useful when performing electrical installation, lighting, junction box, automation or renovation work, where wires need to be quickly connected, disconnected or inspected.
Price 0.44 € VAT incl.( 0.36 € VAT excl. )








