Products catalog

  • Sealed branch clamp terminal 2-pole with silicone gel filling 0.9–1.3 mm² | hermetic

    Code: 1-68259
    Barcode: 1-4779041468259

    Crimp-type branch terminal designed for reliable wire connection and branching without the need to strip insulation. The terminal is filled with silicone gel that effectively protects the contacts from moisture, dust, and corrosion. Ideal for low-current networks and systems requiring fast, reliable, and long-lasting connections.

  • Technical specifications:

    Wire cross-section: 0.9 – 1.3 mm² (16–19 AWG)

    Maximum wire diameter: ~3.18 mm

    Filling: Silicone-based gel (sealing)

    Protection: Resistant to moisture, corrosion, dust

    Application method: Crimping without stripping insulation

    Usage: Indoors and limited outdoor environments

    Installation: Manual – no special tools required

    Features:

    Branching without removing insulation

    Hermetically sealed contact protected from corrosion and environment

    Extremely easy and fast installation – ideal for existing installations

    Suitable for signal, telecommunication, communication, and lighting systems

    Ensures reliable electrical contact even under difficult conditions

    Applications:

    Low-current circuits (alarm, communication, LED lighting)

    Data transmission networks

    Communication and control cable systems

    Telecommunication and automation devices

    Wire branching without additional connectors or boxes

    Pros:

    Suitable for larger cross-section wires (up to 1.3 mm² / 16 AWG)

    Silicone gel ensures sealing and long lifespan

    Allows branching without stripping insulation

    Easy to install – no tools needed

    Compact, reliable, ready-to-use solution

    Cons:

    Single-use – cannot be disconnected or reused

    Not suitable for high current or high voltage

    Designed only for low-current installations

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Terminal | connector paste for contacts | reduces oxidation | 35.3g | WAGO | ALU PLUS | 249-130 | for connecting aluminium and copper wires
    Code: 4017332133890

    Contact paste designed to protect aluminum conductors from oxidation and ensure a reliable electrical connection. This special paste allows aluminum and copper conductors to be safely and efficiently connected within the same connector, making it particularly useful when renovating older electrical installations where aluminum wiring is commonly found.

    Aluminum naturally oxidizes, and the resulting oxide layer increases contact resistance, causes connection heating, and may become a source of electrical faults. By using WAGO ALU-PLUS, the oxidation layer is reduced, electrical conductivity is improved, and the service life of the connection is significantly extended. 

    Price 2.83 € VAT incl.
    ( 2.34 € VAT excl. )
    Terminal block | electrical wire connector | spring clamp | lever-operated | 3x0.08-2.5mm² | max. 4mm² | WAGO | 222-413 | 4017332955676
    Code: 4017332955676

    Installation spring terminal connector with foldable levers, designed for fast, reliable and tidy electrical wire connection without screws or additional tools. This terminal block is especially useful when performing electrical installation, lighting, junction box, automation or renovation work, where wires need to be quickly connected, disconnected or inspected. 

    Price 0.44 € VAT incl.
    ( 0.36 € VAT excl. )
  • privacy policy

    Information