Adhesive cable tie mount | 28×28 mm | black | 100 pcs | Elsp Group | ES-CBM28
Code: ES-CBM28Price 10.16 € VAT incl.( 8.40 € VAT excl. )Adhesive mount 28×28 mm for fixing cable ties without drilling. 100 pcs per pack.
-
Adhesive cable tie mount | 28×28 mm | black | 100 pcs | Elsp Group | ES-CBM28
Adhesive mount 28×28 mm – stuck to a smooth surface, it becomes a fixing point for a cable tie. In addition, it has holes for a screw or rivet. Elsp Group. 100 pcs per pack.
Key idea:
When you cannot or do not want to drill – the mount is stuck on, a tie is threaded through it, and the wires are fixed to a panel door, housing or furniture.Dimensions
28 × 28 mmInstallation
AdhesiveColour
BlackQuantity per pack
100 pcsHow it works
The surface is cleaned and degreased, the protective film is removed from the mount.
The mount is pressed firmly onto the surface.
A tie is threaded through the mount slots and tightened around the wires.
Why use an adhesive mount?
A fixing point without drilling: suitable for metal housings, panel doors, plastic and furniture.Technical specifications
Product type Adhesive cable tie mount Manufacturer / series Elsp Group Product code ES-CBM28 Dimensions 28 × 28 mm Installation Adhesive Colour Black Quantity per pack 100 pcs Main features
- Adhesive base – fixed without drilling.
- Tie slots – the tie can be threaded from several sides.
- 28×28 mm – choose according to tie width and load.
- Holes for a screw or rivet – for heavier bundles.
- black.
Where is it used?
- Wires on electrical panel doors
- Equipment housings and control cabinets
- Computer and TV cables under the desk
- Vehicle and machinery interiors
- Furniture, shelves, retail stands
- Metal and plastic structures
Use by need
For the panel builder.
Fixing wires to doors without drilling.For equipment service.
Cable management in housings and cabinets.For home and office users.
Cables under the desk or behind the TV – neatly.Practical use
If you need to fix a wire bundle on a panel door, degrease the surface, stick mounts every 15–20 cm and pull the wires tight with ties.Pros
- Installed without drilling
- For metal, plastic and wood
- Tie can be threaded from several sides
- 100 pcs per pack
Cons / limitations
- Holding depends on surface cleanliness
- Not suitable for uneven, dusty or greasy surfaces
- The manufacturer does not state load or temperature
- Ties not included
Safety and installation notes
- The surface must be clean, dry and degreased.
- Apply at room temperature and press for a few seconds.
- Do not load immediately after sticking – let the adhesive bond.
- For heavier bundles also fix with a screw if there is a hole.
Quick selection guide
28 × 28 mmadhesiveblack100 pcsSuitable when you need to:- fix wires without drilling;
- tidy cables in panels and housings;
- fix to smooth metal, plastic or wood surfaces.
Check before use:- whether the surface is smooth, clean and degreased;
- whether the tie width fits the mount slots;
- whether the bundle is not too heavy for the adhesive.
Important reminder: an adhesive mount is for light bundles – use screw-on mounts for heavy cables.FAQ
How is it fixed?
Stuck to a clean and smooth surface.Can it be screwed?
Yes, the mount has holes for a screw or rivet.What are the dimensions?
28 × 28 mm.Is it suitable for metal?
Yes, for smooth metal, plastic and wood.Are ties included?
No, choose ties separately.How many pieces per pack?
100 pieces.Adhesive tie mount 28×28 mm, black, 100 pcs
Adhesive mount 28×28 mm for fixing cable ties without drilling – for panels, housings and furniture. Elsp Group.
Published: 2026-11-22 · Data verified against the manufacturer datasheet: 2026-11-22
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products








