Automatic Wire Stripper | 0.2–6.0 mm² | AWG 24–10 | No Adjustment | HAUPA ECO | 210695

Code: 210695

Inquire about this item

Add to compareRemove from comparison Compare goods (0)

Price 31.39 € VAT incl.

( 25.94 € VAT excl. )

Want another price? Suggest yours!

Product description

Automatic Wire Stripper | 0.2–6.0 mm² | AWG 24–10 | No Adjustment | HAUPA ECO | 210695

HAUPA 210695 is an automatic wire stripper for removing insulation from flexible and solid conductors with cross-sections from 0.2 to 6.0 mm². It self-adjusts to each wire — no manual setting required. The tool is used in electrical installation, control cabinets, automation, and industrial environments where speed and precision matter.

Key Idea:
Grip the wire, squeeze — the insulation comes off cleanly and precisely without damaging the conductor. No need to select separate blades or adjust depth. The integrated cross-cutting function allows cutting wires up to 2.5 mm² with the same tool. This is the everyday electrician's tool that saves time for both single jobs and repetitive mass stripping.

Stripping Range
0.2–6.0 mm² (AWG 24–10)

Automatic Adjustment
No setting needed for cross-section

Integrated Cutter
Wires up to 2.5 mm²

Replaceable Blades
Model 210695/E

How It Works

The tool is operated single-handed: insert the wire into the front opening up to the adjustable depth stop (5–15 mm), then squeeze the handle. The internal mechanism automatically sets the blade position — adapting to the specific wire diameter whether it's a 0.2 mm² flexible or a 6.0 mm² solid conductor.

Once the blades engage, insulation is removed in one smooth motion without damaging the copper conductor. After stripping, the same tool can be used as a cross cutter — the integrated cutting blades sever wires up to 2.5 mm² at the base of the handle.

The blades are replaceable — when worn (from heavy-insulation or thick-wall cable work), replacement blades 210695/E restore cutting precision and extend the tool's service life.

What Makes HAUPA 210695 Useful?
The tool is not limited to one cable type — it works across the full range used in practical electrical work, from small control wires to larger power conductors, without re-adjustment between cross-sections.

Technical Specifications

Product Type	Automatic wire stripper
Manufacturer	HAUPA GmbH, Germany
Model / Code	210695 (ECO series)
Stripping Range	0.2–6.0 mm² (AWG 24–10)
Cross-section Adjustment	Not required — automatic
Integrated Cutter	Yes — wires up to 2.5 mm²
Stripping Length	Adjustable 5–15 mm
Replaceable Blades	Yes — 210695/E
Wire Type	Flexible and solid
Length	~165 mm
Weight	~88 g
Country of Origin	Germany

Key Features

Automatic self-adjustment — blades set the correct depth automatically; no manual adjustment needed for each wire cross-section.
Wide range 0.2–6.0 mm² — one tool for control, signal, and power wires; no need for different strippers per type.
Adjustable strip length 5–15 mm — set the stop once and strip a batch of wires to a uniform length quickly.
Integrated cutting blades — cut wires up to 2.5 mm² with the same tool without repositioning your hand.
Replaceable blades (210695/E) — replace them separately when worn, extending the tool's overall service life.
Suitable for confined spaces — compact body allows working inside distribution panels, cable ducts, and similar environments.
Ergonomic handle — comfortable one-hand grip reduces fatigue during long installation sessions.

Where Is It Used?

Assembly of electrical distribution panels and wire preparation for terminals.
Automation and control cabinet installation — mass stripping of control wires.
Industrial equipment electrical installation — cable marathons without interruption.
Solar energy, inverter, and battery system installation with small DC cables.
Preparation of data and control lines: sensors, transducers, signal cables down to 0.2 mm².
Repair and maintenance work where speed matters.
Production environments — cable warehouses, assembly lines where stripping is done in series.
Small projects and hobbyist electricians — one tool for entire home wiring.

Use By Application

For the installation electrician.
Strip hundreds of wires daily for distribution panels — HAUPA 210695 does it in one motion without manual adjustments, enabling work 2–3× faster than manual strippers.

For the automation and control system integrator.
Mixed cable assortment — control, signal, sensor wires of different cross-sections — handled with the same tool without changing settings between wire types.

For the beginner enthusiast and home user.
A great first automatic stripper — strip correctly from the first attempt without risking conductor damage.

Practical Example:
If you are assembling an automation panel with 40 control wires from 0.5 to 2.5 mm², HAUPA 210695 lets you strip the entire batch without any re-adjustment between cross-sections — set the stop once (e.g. 8 mm) and work through all wires one after another. The integrated cutter lets you use the same tool to trim excess — no need to reach for separate tools.

Advantages

Automatic adjustment — no time lost adjusting to each wire.
Wide 0.2–6.0 mm² range — one tool for virtually all installation work.
Integrated cutter reduces the number of tools needed on site.
Replaceable blades — long service life; no need to replace the entire tool.
Adjustable strip length 5–15 mm — precise serial work.
German manufacture (HAUPA GmbH, Remscheid) — reliable quality.

Limitations

Cross-cutting function limited to 2.5 mm² — thicker wires require a separate cutter.
ECO series — reliable for everyday use, but for very intensive industrial production higher-grade HAUPA models (211930, 211928) may be more suitable.
Not suitable for stripping screened coaxial cables with multi-layer insulation — those require a specialised tool.

Safety and Installation Notes

Stripping must only be performed with power disconnected — this tool is not rated for live insulation work (no VDE/1000V insulation).
Before replacing blades (210695/E) ensure the tool is not under tension — blades have sharp edges.
Not suitable for removing insulation from armoured cables.
Set the strip length stop before a batch run — ensures consistent results and reduces rework.
After intensive use, check blade sharpness — dull blades begin to pull and may damage conductors.

Quick Selection Guide

0.2–6.0 mm²
Flexible and solid wire

Automatic
No adjustment between cross-sections

Strip Length
5–15 mm (adjustable)

Cutter
Up to 2.5 mm² wires

Suitable when you need:

Fast stripping of mixed cross-section wires without adjustments
One tool for wires from control (0.2 mm²) to 6.0 mm²
Integrated cutting function alongside stripping

Check before use:

Is the wire flexible or solid (not armoured/screened multi-layer)?
Is the cross-section within the 0.2–6.0 mm² range?
Are the blades sharp — replace worn blades with 210695/E.

Important reminder: HAUPA 210695 does not replace a VDE-insulated tool — it is a stripping tool for use on de-energised circuits. The cutting function is limited to 2.5 mm².

Frequently Asked Questions

Does HAUPA 210695 need to be adjusted for different wire cross-sections?
No — the tool automatically adjusts to each wire from 0.2 to 6.0 mm².

Can flexible wires (e.g. H07V-K) be stripped?
Yes — the tool works with both flexible (H07V-K) and solid (H07V-U) conductors.

Which replacement blades fit this model?
Original replacement blades are identified by code 210695/E and are available separately.

Can the strip length be set?
Yes — the stop can be adjusted from 5 to 15 mm, enabling serial work with a uniform strip length.

Is the integrated cutting function suitable for coaxial or screened cables?
No — this tool is designed for standard solid or flexible insulated wires; screened and multi-layer cables require specialised strippers.

How does HAUPA 210695 differ from the higher-grade HAUPA 211930?
HAUPA 211930 is a heavy-duty automatic stripper (0.08–6.0 mm²) for intensive industrial use; 210695 ECO is the lighter, compact everyday version suited to fast and accurate electrical installation work.

Automatic Wire Stripper HAUPA 210695 | 0.2–6.0 mm²

HAUPA 210695 is a German-made automatic wire stripper for electricians and installation professionals working with wires from 0.2 to 6.0 mm². Automatic self-adjustment to every wire cross-section, integrated cutting function up to 2.5 mm², and replaceable blades (210695/E) make it a one-handed everyday tool for distribution panels, automation cabinets, and field installation work alike.

Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

Attributes

Manufacturer

HAUPA

CE certificate – a guarantee of safety, quality, and compliance

This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.

CE certification means that the product has been evaluated according to the main criteria:

Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purpose

CE marking allows this product to:

be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environments

The CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.

What does this mean for you as a buyer?

Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions