Cable holder | cable clip | self-adhesive | base 9.6x9.6mm | opening 2.8x4.x2mm | white | 500 pcs.

Self-Adhesive Cable Clip – 9.6×9.6 mm, Nylon, White, -20...+120 °C

White self-adhesive cable clip is designed for neatly securing wires, cables and thin tubes to smooth surfaces. The clip has an adhesive base on the bottom, so no drilling or additional mounting screws are required during installation.

The clip is made of nylon, is white in color and features an open cable-retaining design. The compact 9.6×9.6 mm base makes it suitable for electrical installations, electronic devices, control panels, household appliances and other applications where small-diameter wires need to be routed neatly.

Two retaining elements are formed in the upper part of the clip, with the cable pressed between them. This design allows the cable to be secured quickly without an additional cable tie.

• the cable is pressed directly into the clip;
• no additional cable tie is required;
• convenient for installing multiple identical cable fastening points;
• helps maintain the cable routing direction;
• the compact design takes up little space.

The clip is made of nylon – a lightweight and flexible plastic material suitable for various cable organization and fastening applications.

• lightweight construction;
• flexible cable-retaining elements;
• electrically insulating material;
• white color;
• suitable for indoor electrical and electronic installations.

The operating temperature range of the clip is -20 to +120 °C.

When evaluating the particular installation location, consider not only the temperature range of the nylon clip, but also the operating conditions of the adhesive base, cable insulation and mounting surface.

• Base width: 9.6 mm;
• Base length: 9.6 mm;
• Overall height: approx. 6.6 mm;
• Inner width: 6.8 mm;
• Inner retaining area: approx. 4.5 mm;
• Retaining element width: approx. 2.0 mm.

• Self-adhesive base – installation without drilling.
• Integrated cable retainer – no additional cable tie required.
• Nylon construction – lightweight and flexible.
• 9.6 × 9.6 mm base – for compact installation.
• Approx. 6.6 mm height – minimal projection from the surface.
• -20...+120 °C temperature range.
• 94V-2 flammability class.
• White color.
• Quick installation.
• 500 pcs. package – suitable for larger installation jobs.

• Electrical panels – for organizing small control and signal wires.
• Automation equipment – for forming cable routing paths.
• Electronic devices – for internal cable organization.
• Household appliances – for securing wires to the housing.
• Offices – for organizing thin wires around furniture or equipment.
• Telecommunications equipment – for signal and communication cables.
• Control cabinets – for routing small cables and wires.
• Various installation work – when a small self-adhesive cable fastening point is required.

For example, several thin wires need to be routed neatly inside an electronic device housing. The cable routing points are planned on the clean housing surface and several clips are attached.

The wire is then pressed into the retaining section of each clip. This keeps the wire in the selected position and prevents it from falling onto other components inside the device.

If the cable routing direction changes, the clips are positioned according to the required path, leaving suitable spacing between fastening points.

For electricians: a convenient solution for neatly routing thin wires in electrical and control equipment.

For automation installers: allows routing paths for small signal or control cables to be created without drilling.

For electronics manufacturers: suitable for organizing wires inside equipment housings when the surface is suitable for adhesive mounting.

For maintenance technicians: can be used for additional cable fastening when modifying or repairing equipment.

For installers: the most important factors are proper surface preparation and checking the cable size and ambient temperature.

1. Choose the cable routing location. Plan where the cable clips will be installed.
2. Check the surface. It must be smooth, clean, dry and suitable for adhesive mounting.
3. Clean the surface. Remove dust, grease, moisture and other contaminants that may reduce adhesion.
4. Check the cable size. Make sure the cable fits into the retaining section of the clip.
5. Remove the protective layer from the adhesive base.
6. Attach the clip at the intended location.
7. Firmly press the clip base against the surface.
8. Repeat the installation at other points along the cable route.
9. Press the cable into the upper retaining section of the clip.
10. Check the fastening. Make sure the cable is held securely and the clips are not coming away from the surface.

• Apply only to a clean, dry and degreased surface.
• Check the outer cable dimensions before installation.
• The clip is not intended for heavy cables or high mechanical loads.
• Do not use it as the primary safety or structural fastening element.
• Adhesive bonding depends on the surface material and condition.
• Before large-scale installation, it is recommended to test adhesion in the selected location.
• Consider the ambient temperature and operating conditions.
• When installing cables in electrical equipment, follow the applicable electrical safety requirements.

Quick selection guide

Choose the self-adhesive nylon cable clip when you need to quickly and compactly secure a small-diameter wire to a smooth surface without screws, drilling or additional cable ties.

Compact self-adhesive cable clip for quick wire organization

The white self-adhesive cable clip is designed for neatly securing small-diameter wires and cables to smooth surfaces. The adhesive base allows the clip to be installed without drilling or additional mounting screws.

The clip is made of nylon, its base dimensions are approximately 9.6 × 9.6 mm, and its overall height is approximately 6.6 mm. The operating temperature range is -20...+120 °C, and the flammability class is 94V-2.

The open retaining design allows the cable to be pressed directly into the clip without an additional cable tie. This solution is suitable for electronic devices, control cabinets, electrical installations, household appliances and other applications where thin wires need to be organized quickly and neatly. The package contains 500 pcs.