Products catalog

Home/Product Catalog/Other products/Operational service products/Cable ties | cable holders | mounting accessories/Holders for cables and wires
  • New item   Cable Holder | Wire Clip | Self-Adhesive | Base 16x14.5mm | Opening 8.1x5.1mm | White | 100 pcs
    New item   Cable Holder | Wire Clip | Self-Adhesive | Base 16x14.5mm | Opening 8.1x5.1mm | White | 100 pcs 1
    New item   Cable Holder | Wire Clip | Self-Adhesive | Base 16x14.5mm | Opening 8.1x5.1mm | White | 100 pcs 2

    Cable Holder | Wire Clip | Self-Adhesive | Base 16x14.5mm | Opening 8.1x5.1mm | White | 100 pcs

    Code: ES-NCA-8.2W
    Inquire about this item
    Price 8.49 € VAT incl.
    ( 7.02 € VAT excl. )
    Want another price? Suggest yours!

    The self-adhesive cable holder is designed for neatly securing and routing wires and cables on smooth surfaces. The adhesive backing allows quick installation without drilling or screws, while its compact design makes it suitable for use in electrical distribution boards, electronic enclosures, furniture, office equipment, and other indoor installations. The holder is made of durable PA66 polyamide, has a UL94 V-2 flammability rating, and is suitable for operating temperatures from –20 °C to +120 °C. 

  • Product description

    Self-Adhesive Cable Holder – Flat, White, PA66, 16 × 14.5 mm

    Self-adhesive cable holder is designed for neatly securing wires and cables to smooth surfaces. Its flat construction helps route the cable in the desired direction, reduces loose-hanging wires and allows for more organized installations in electrical panels, cabinets, devices, furniture and other technical structures.

    The holder is made of PA66 polyamide, also known as nylon 66. An adhesive base is located on the bottom, so no drilling or additional screws are required during installation. After removing the protective layer, the holder is pressed onto a clean, dry and smooth surface.

    The curved fixing section helps keep the cable inside the holder, while the compact 16 × 14.5 mm external dimensions make the product suitable for installations where space is limited.

    Installation without drilling:
    The adhesive base allows the holder to be installed without screws, rivets or separate fastening elements. This is particularly convenient for mounting on panel walls, plastic housings, furniture or other surfaces where drilling is impossible or undesirable.
    Important regarding adhesion:
    Adhesive strength depends on the surface material, cleanliness, smoothness, temperature, cable weight and mechanical load. The holder provides the best adhesion on a smooth, dry, degreased and dust-free surface.
    Not intended for high load-bearing applications:
    This holder is designed to organize and support cables, but should not be used as the primary fastening method for heavy cables, moving wire harnesses or safety-critical components. Mechanical fastening should be used for higher loads.
    Product type
    Flat cable holder
    Mounting
    Self-adhesive
    Material
    PA66
    Color
    White
    External dimensions
    16 × 14.5 mm
    Internal opening height
    7 mm
    Operating temperature
    −20...+120 °C
    Flammability class
    UL94 V-2

    Flat Cable Fixing Design

    The holder features a low-profile, flat construction, so it protrudes only slightly from the mounting surface. The cable is inserted through the opening and held underneath the upper curved section of the holder.

    The side fixing tab helps reduce the risk of the cable slipping out of the holder. At the same time, the wire can be installed without using an additional cable tie.

    Design advantages:
    • Compact holder profile.
    • No additional cable tie required.
    • Suitable for routing small wires and cables.

    Self-Adhesive Base

    The bottom of the holder features an adhesive layer covered by a protective film. Before installation, remove the film and press the holder onto the prepared surface.

    This installation method allows a cable route to be created quickly without additional mounting holes. The holders can be positioned at several points so that the cable can be routed straight, at an angle or around structural elements.

    Surface preparation:
    Before applying the holder, the surface must be cleaned of dust, grease, moisture, silicone, oil and other substances that may reduce adhesion. Do not apply to peeling paint, very rough or wet surfaces.

    PA66 Polyamide Construction

    The holder is made of PA66 polyamide. This material is widely used in electrical installation and cable management products due to its mechanical strength, low weight and resistance to normal temperature exposure.

    The white color makes the holder less noticeable when installed on light-colored panels, furniture, household appliance housings, plastic boxes and other light-colored equipment.

    Material properties:
    The properties of PA66 may be affected by moisture, temperature, ultraviolet radiation and the chemical environment.

    UL94 V-2 Flammability Class

    UL94 V-2 is a material flammability classification describing the behavior of polymeric material during a vertical burning test.

    Wide Specified Temperature Range

    The operating temperature of the holder is from −20 to +120 °C. This range describes the specified operating limits of the plastic part.

    Compact Dimensions

    The external dimensions of the holder are 16 × 14.5 mm. The compact construction is designed for small cables and locations where there is limited space for cable management components.

    Drawing designation Dimension
    A – overall height 16 mm
    B – overall width 14.5 mm
    C – internal opening width 7 mm
    D – internal opening depth 8.1 mm
    E – internal opening height 5.1 mm
    F – body height according to side view 7.3 mm
    Cable size selection:
    The internal opening dimensions do not always directly correspond to the maximum permissible diameter of a round cable. Before installation, it is recommended to check the actual cable diameter and perform a test insertion.

    Technical Parameters

    Product type Flat self-adhesive cable holder
    Purpose Securing and organizing wires and cables
    Mounting method Adhesive base
    Material PA66 polyamide
    Color White
    Flammability class UL94 V-2
    Specified operating temperature −20...+120 °C
    A – overall height 16 mm
    B – overall width 14.5 mm
    C – internal opening width 7 mm
    D – internal opening depth 8.1 mm
    E – internal opening height 5.1 mm
    F – body height according to side view 7.3 mm
    Adhesive base type Double-sided adhesive layer
    Application environment Indoor installation

    Key Features

    • Flat cable fixing design.
    • Adhesive base.
    • Installation without drilling or screws.
    • Integrated cable fixing tab.
    • PA66 polyamide construction.
    • White color.
    • UL94 V-2 flammability class.
    • Operating temperature of −20...+120 °C.
    • Compact 16 × 14.5 mm dimensions.
    • Suitable for organizing small wires and cables.

    Applications

    Electrical panels
    For organizing control, signal and low-power wires.
    Electronic housings
    For routing internal wires and keeping them away from moving parts.
    Office equipment
    For organizing computer, monitor, charger and communication cables.
    Furniture
    For securing cables under desks, inside cabinets and furniture structures.
    Household appliances
    For organizing internal and external low-load wires.
    Automation equipment
    For routing sensor, control and signal cables.

    Installation Procedure

    1. Select the installation location. Check that the surface is smooth and suitable for adhesive mounting.
    2. Check the cable dimensions. The cable must fit freely into the holder opening.
    3. Clean the surface. Remove dust, grease, moisture and other contaminants.
    4. Allow the surface to dry completely.
    5. Remove the protective film from the adhesive base. Do not touch the adhesive surface with your fingers.
    6. Position the holder accurately. Once attached, it is not recommended to reposition it.
    7. Press firmly. Apply even pressure to the holder against the surface for several seconds.
    8. Allow the adhesive layer to bond. Do not immediately load the holder.
    9. Insert the cable.
    10. Check the fixing. The cable must not place excessive tension or sideways pressure on the holder.

    Usage and Safety Recommendations

    • Apply only to a clean, dry and stable surface.
    • Do not use on dusty, greasy or peeling surfaces.
    • Do not bend the cable to a radius smaller than specified for the cable.
    • Do not overload the holder with heavy or tensioned cables.
    • Do not use the holder as protection against cable pull-out.
    • Do not install in locations where the cable is constantly moving or vibrating unless additional fastening is provided.
    • Do not use on very rough or porous surfaces without first checking adhesion.
    • Use additional mechanical fastening in safety-critical installations.

    FAQ – Frequently Asked Questions

    What is this holder designed for?
    It is designed for securing and neatly routing small wires and cables.
    Is drilling required for installation?
    No. The holder features a self-adhesive base.
    What material is it made of?
    It is made of white PA66 polyamide.
    What are the holder dimensions?
    The overall height is 16 mm and the width is 14.5 mm.
    What is the specified operating temperature?
    From −20 to +120 °C.
    What is the flammability class?
    UL94 V-2.
    Can the holder be repositioned?
    After removing the holder, the adhesion of the adhesive layer will generally decrease, so it is recommended to select the installation location accurately from the start.
    Is it suitable for heavy power cables?
    The holder is intended for organizing lightweight cables. Heavier or tensioned cables require a stronger mechanical fastening method.
    Can it be applied to metal?
    Yes, provided that the metal surface is smooth, clean, dry and degreased.
    Can it be applied to plastic?
    Yes, but adhesion depends on the type of plastic and its surface. A test application is recommended before installation.

    Compact Self-Adhesive Cable Holder

    The flat cable holder is designed for neatly securing small wires and cables in electrical panels, electronic housings, furniture, office equipment and other installations.

    The adhesive base allows the holder to be installed without screws or drilling. For reliable adhesion, the mounting surface must be smooth, clean, dry and degreased.

    The holder is made of PA66 polyamide. The material has a UL94 V-2 flammability classification, while the specified operating temperature is from −20 to +120 °C.

    Before installation, check the cable dimensions and make sure that it does not place excessive tensile or sideways load on the holder.

    The holder is designed for cable organization and should not be used as the sole fastening element for heavy, moving or safety-critical cables.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • privacy policy

    Information