Products catalog

  • Rotary deflector D160 | ball bearings | ABS plastic | green

    Code: 04511

    ABS plastic rotary deflector D160 with ball bearings, green. Fits onto a Ø160 mm pipe or ventilation outlet and extracts air without electricity.

  • Plastic rotary deflector D160 – green

    The rotary roof deflector (wind turbine) is installed on a D160 mm ventilation duct or outlet. The wind spins the head, which creates negative pressure above the duct and helps extract air from the rooms – without electricity and without a motor.

    Key point

    The head rotates on ball bearings; the housing is made of UV-resistant ABS plastic with a built-in spirit level. ABS plastic does not rust and is unaffected by moisture, so it is also suitable for aggressive environments – livestock farms, damp rooms, coastal areas. Choose the colour to match the roof – ventilation outlets and flashings are available in the same colours.

    Connection diameter
    D160 mm
    Material
    ABS plastic
    Bearings
    ball
    Colour
    Green

    ⚠ For ventilation only

    The deflector is intended for ventilation ducts only – to extract humid and warm air. Do not install it on flues of stoves, fireplaces, sauna heaters or boilers: hot flue gases and acidic condensate will damage it, and there is a risk of fire and carbon monoxide (CO) poisoning.

    How it works

    • The deflector is fitted onto a Ø160 mm pipe or ventilation outlet and levelled vertically with the spirit level.
    • The wind spins the head and extracts air from the duct.
    • Without wind the duct stays open for natural draught.
    operating principle and estimated air extraction | elsprendimai.eu
    ☝ Click the diagram to open an enlarged version.

    Estimated air extraction – D160

    Wind speed 2 m/s 4 m/s 6 m/s
    Air extraction, m³/h 60 115 175

    Indicative estimate, not manufacturer data: actual flow depends on duct length and resistance, temperature difference and air supply to the room. Without wind, the duct works by natural draught.

    Technical specifications

    Product type Rotary roof deflector (wind turbine)
    Mounting diameter 160 mm
    Connection diameter d 163 mm (check the actual pipe diameter)
    Overall height H 218.5 mm
    Base height E 46.2 mm
    Material ABS plastic, UV-resistant
    Rotating assembly Ball bearings
    Built-in spirit level Yes
    Operating temperature −60 °C … +70 °C
    Colour Green
    Power supply Not required
    Not suitable for Smoke and hot gases

    Where it is used

    • Ventilation ducts of bathrooms, kitchens, laundry rooms
    • Heat recovery unit exhaust and domestic ventilation outlets
    • Attic ventilation
    • Livestock farms, agricultural buildings – aggressive environments

    Installation diagram: common mistakes and the correct way

    Plastic rotary deflector D160 – green – installation diagram: wrong and right | elsprendimai.eu
    ☝ Click the diagram to open an enlarged version.
    ⚠ The diagram is for guidance only and may contain inaccuracies. Before installation, check it against the manufacturer's instructions and the roofing requirements.
    Responsibility for installation lies with the qualified specialist performing it. UAB „Elektrotechnikos sprendimai“ is not liable for installation or possible errors.
    ☝ Elsprendimai.eu recommends:

    ✓ Pros

    • Ball bearings – turns even in lighter wind
    • ABS does not rust – suitable for aggressive environments
    • Built-in spirit level – easy to install plumb
    • Colours match outlets and flashings
    • Works without electricity

    → Limitations

    • Only for a Ø160 mm system (adapter for smaller pipes)
    • May ice up and stop temporarily in winter
    • Not suitable for flues

    ⚠ Installation and maintenance

    • Measure the pipe diameter before installation.
    • Level with the spirit level – a tilted head rotates unevenly.
    • Through a cold attic, use an insulated ventilation outlet – less condensate.
    • Once a year check that the head rotates freely.
    • Roof work is work at height.

    FAQ

    Is it suitable for aggressive environments?

    Yes – ABS plastic does not rust, so it suits livestock farms, damp rooms and coastal areas.

    Does it need electricity?

    No – the head is driven by the wind.

    How do I connect it to a Ø100 or Ø125 duct?

    Use the rubber adapter D100–125.

    Can it be installed on a flue?

    No – hot flue gases would deform the plastic.

    Does the colour fade?

    The housing is made of UV-resistant ABS plastic designed for outdoor use.

    In short

    Plastic rotary deflector D160 with ball bearings (green) – a rust-free ventilation solution for a Ø160 mm system, also suitable for aggressive environments. Unsure about the size or roofing? Send us the duct diameter and roof type – we will help you choose.

    Phone: +370 620 72733
    E-mail: info@elsprendimai.eu

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Inspection hatch door | 200x400x55mm | steel | RDL2040CS
    Code: 21360

    High-quality inspection doors designed for convenient and aesthetic access to engineering systems – water meters, valves, electrical or heating equipment. The sturdy steel body, resistant to corrosion, combined with a moisture-resistant gypsum board, allows for easy integration of the hatch into various types of walls and partitions. A modern adjustable tilt hinge ensures easy opening and closing of the doors with just a touch.

    These doors can be finished with a variety of materials – tiles, stone, mirrors, or other decorative coatings – seamlessly blending into the overall interior design. 

    Price 41.12 € VAT incl.
    ( 33.98 € VAT excl. )
    Supply air ventilation damper in wall | with G3 filter | ASA plastic outdoor grille | D125 | 0,5m | white | 12,5TOV
    Code: 09452

    Wall-mounted supply air vent D125 with a 500 mm insulated duct, G3 filter and adjustable diffuser. Outdoor side – ASA plastic outdoor grille. Intended for controlled air inflow in rooms with forced exhaust.

    Price 33.58 € VAT incl.
    ( 27.75 € VAT excl. )
    Inspection hatch-door with push-to-open mechanism | 400x500x15mm | aluminum profile | RDL4050B
    Code: 12120

    Inspection doors-hatch are designed to conveniently and aesthetically conceal access to utility systems such as water meters, valves, electrical installations, or ventilation equipment. Made from durable aluminum profile and filled with moisture-resistant plasterboard, these doors are not only long-lasting but also adaptable to any interior – they can be painted or decorated along with the wall. The doors open and close with a push mechanism, so no additional handles or locks are needed for installation. Perfect for mounting in plasterboard walls or partitions where frequent access to hidden components is required.

    Price 69.41 € VAT incl.
    ( 57.36 € VAT excl. )
    Flexible aluminum air duct | for ventilation | ventilation systems | D160mm | 3,15m | silver | LAO160U
    Code: 18721

    Flexible aluminum air duct - a reliable solution for various ventilation, air circulation and air extraction systems. Thanks to the 80 micron thick aluminum foil, the duct is durable, resistant to high temperature and maintains its shape even under demanding operating conditions.

    The lightweight, flexible and easy-to-install duct is suitable for connecting fans, heat recovery systems, air extraction ducts, kitchen hoods and other ventilation components. 

    Price 8.62 € VAT incl.
    ( 7.12 € VAT excl. )
    Decorative steel radiator grille | for 3-section cast iron radiator | 290×610×140 mm | white | DRG3
    Code: 36390

    Decorative steel grille for covering a 3-section cast iron radiator. Dimensions 290×610×140 mm (W×H×D), colour white, polymer coating.

    The grille hides an old radiator and reduces the risk of direct contact with hot sections – important in children's rooms, kindergartens and schools. Before ordering, measure the radiator width including fittings, its height and its projection from the wall.

    For a longer radiator, grilles can be combined side by side – sections add up, e.g. 10 sections = DRG5 + DRG5.

    Fixings are not included. Side panels in the same colour (610×140 mm) are sold separately: side panel.

    Price 31.46 € VAT incl.
    ( 26.00 € VAT excl. )
  • privacy policy

    Information